Create Impressive Street Appeal for a commercial building
- 状态: Closed
- 奖金: $108
- 参赛作品已收到: 15
- 获胜者: GinoGiampaolo
竞赛简介
I am remodeling the entrance and facade for an old commercial office building.
I already have a preliminary facade concept using curtainwall glass. However, I have discovered that the costs for the curtainwall glass will exceed our construction budget, so I want to explore an aesthetically pleasing facade using storefront glass (maximum 4'W x 10' high panels) and possibly other textures, materials, colours.
Storefront glass will require additional structural steel, which must be incorporated in the design in an aesthetically appealing manner.
Additional materials (such as corrugated tin, wood, or even just paint over the existing concrete block wall) can be utilized to improve the aesthetics of the building. Note that this building is located in Canada.
I have attached a link to some files that will help to understand the scope of this project.
https://www.dropbox.com/sh/vrn3x6pw2qqul7w/AAB4lIrOS_NBw1Gaz0iA8IKMa?dl=0
The contest winner must provide a copy of the modified sketchup file to the contest sponsor, but contest submissions can be either SKP files or JPG files showing mulitple angle views.
您还可能感兴趣的技能
雇主反馈
“Gino paid close attention to the information provided in the contest and was able to provide an aesthetically pleasing AND cost effective design.”
rwesterl, Canada.
公共说明面板
-
DavidRY
- 8 年 之前
Can you send me an email, please? davidraymond_designer@yahoo.com. I need some info regarding the project. Thank's
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Contest is closed:Thank you to everyone who submitted to this contest! I have narrowed it down to 2 excellent submissions. I am waiting to receive some votes and then we will make a decision very soon. Some great talent - makes it difficult to choose!
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Contest will be closing in 17 hours :-)
- 8 年 之前
-
archmamun
- 8 年 之前
i will come soon with my entry.
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Great - looking forward to your entry!
- 8 年 之前
-
barmashiani
- 8 年 之前
Hello Ray, I just sow your invitation for participate to this contest. I will use the sketchup file I have done and just find a solution of how this building can be. Ani Barmashi Archstudio1
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Great. Looking forward to seeing your submission!
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Contest has been extended for 3 more days only!
- 8 年 之前
-
竞赛主办者 - 8 年 之前
@tespimentel were you planning to submit still? Does anyone else want me to extend this contest? I can extend another 3 days if necessary. about 44 hours from now. Thanks!
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Clarification: The building is only about 4" away from property line and city sidewalk. A Canopy is allowed to extend 8' off of building over the sidewalk. However we cannot have anything at street level that extends past the property line.
- 8 年 之前
-
竞赛主办者 - 8 年 之前
I can extend for 3 more days.
- 8 年 之前
-
tespimentel
- 8 年 之前
can you extend? 34 hours is not enough...
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Feel free to also use some of the design that the owner already have spent quite a bit of time developing. The design does not have to be drastically different. the main objective was to reduce costs by going to storefront glass, but at the same time to perhaps improve in some ways, especially considering that there would be structural steel to consider. See design notes. Thanks!
- 8 年 之前
-
竞赛主办者 - 8 年 之前
I have also added another photo with lots of pictures of the building on all sides. The intent of this contest is to improve the main 7th avenue street entrance, but we will want to integrate the other sides of the building also at some point in time.
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Note that in order to reduce constructions costs, one of the design constraints listed was to limit the height of the individual glass sections to 10' for storefornt glass instead of curtainwall glass (which is much more expensive ~ 2 x cost). Storefront glazing panels can be about 4' wide if they are 10' tall. If any glass expanse is more than than 10' in height, there would need to be structural steel (and finishing) to support the upper level of glass.
- 8 年 之前
-
竞赛主办者 - 8 年 之前
I have added another document in the design notes folder which highlights some of the interior constraints of the building. The building was built in 3 separate phases many years apart. Phase 1 and 2 share the same elevations, but phase 3 has different interior floor elevations.
- 8 年 之前
-
rcda
- 8 年 之前
You can comment on my submitted entry. Thanks! :)
- 8 年 之前
-
竞赛主办者 - 8 年 之前
https://www.freelancer.ca/faq/view.php Can I contact the contest holder?
Freelancers, you can leave a comment for the contest holder on your private message box.- 8 年 之前
-
竞赛主办者 - 8 年 之前
https://www.freelancer.ca/faq/view.php How do I provide comments to designers for submitted designs?
Only the contest holder can leave private comments for designers. No one else can read them. To provide comments, click the "Message" button on a design entry or navigate to the designer’s page.
To leave comments that can be viewed and responded to by everyone, use the Public Clarification Board at the bottom of the contest page.- 8 年 之前
-
rcda
- 8 年 之前
Hello, can we submit draft for your comments?
- 8 年 之前
-
竞赛主办者 - 8 年 之前
Yes the 3DS file would be fine. I am mostly interested in obtaining a design that makes this building have great street appeal. I thought sketchup would have been easier to start with since the building dimensions and proportions are already provided and are correct. Dimensions and proportions are important to consider. Thanks for your question.
- 8 年 之前
-
hiepinf
- 8 年 之前
So if we r the winner we can provide the 3ds max file instead of sketchup file?
- 8 年 之前
-
竞赛主办者 - 8 年 之前
3ds max is OK. Sketchup already has the 3D model created so would be an easier starting point.
- 8 年 之前
-
hiepinf
- 8 年 之前
can we use 3ds max sir?
- 8 年 之前
-
teamfivepro
- 8 年 之前
i will do it
- 8 年 之前