I would like hire a solidworks designer工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    7,389 I would like hire a solidworks designer 搜到的工作,价格货币为 HKD

    FEA on single part and modifications to existing solidworks design

    $797 (Avg Bid)
    $797 平均报价
    55 个竞标

    i am looking for a report on the design of a jig for angled drilling. i want a 30 page report The document needs to address the following: – Abstract introduction Objectives – Background Study (Literature Review) – Methodology/Approach – Implementation – Results – Analysis/Discussion – Conclusion

    $2689 (Avg Bid)
    $2689 平均报价
    17 个竞标
    3D drawing 已经结束 left

    For our product we need some expertise on people who can support us in the creation of 3D draw...need some expertise on people who can support us in the creation of 3D drawings of enclosures. We have an existing drawing which must be adapted slightly. Preferably in solidworks or fusion360. Initial job we be limited in order to get to know each other.

    $125 / hr (Avg Bid)
    $125 / hr 平均报价
    94 个竞标
    LTW MECHANICAL PARTS 已经结束 left

    INVENTOR & SOLIDWORKS EXPERTS NEEDED TO DESIGN FEW MECHANICAL PARTS

    $16572 (Avg Bid)
    $16572 平均报价
    60 个竞标

    ...optimise the design. we can provide 3d file of what is done so far (concept work), so that you can focus on optimisation. Ability to perform CFD analysis is a must, possibility to use solidworks preferred, but not necessary. begin your bid with "vent" to make sure you've read this brief trough. Please bid ONLY if you are an aeronautical engineer. Thanks

    $1469 (Avg Bid)
    $1469 平均报价
    21 个竞标

    Hi Bipin this is raj. I am working on a solidworks model and its about an automata we have to design. I have the base ready for the same and would need some assistance to help me get the design done. Please advise if you could help me in this case.

    $55 / hr (Avg Bid)
    $55 / hr 平均报价
    1 个竞标
    Solid works model 已经结束 left

    I need a solidworks model made of a pergola made from aluminum round tube to figure out the deflection and to size the tubing accordingly for fabrication.

    $148 (Avg Bid)
    $148 平均报价
    17 个竞标
    Need Solidworks Expert 已经结束 left

    Need to design 2 can machines with pickup and pouring mechanism.

    $367 (Avg Bid)
    $367 平均报价
    4 个竞标

    We have a 3D model of a modern USPS mailbox here: [登录来查看链接] Your tasks will be: (1) Modify that "Street Collection" blue and red mailbox to resemble the one in the 1963 photos: [登录来查看链接] (2) Based on it, create a new "Relay" green mailbox seen next to it in the B&W photos You must

    $734 (Avg Bid)
    $734 平均报价
    11 个竞标
    Design a Simple Brush 已经结束 left

    I have a drawing that I will need to be transformed into SolidWorks. It will require mechanical engineering skill for a small portion. Overall the design is very simple and will not take too much time. There are similar products on the market.

    $609 (Avg Bid)
    $609 平均报价
    52 个竞标
    Didgeridoo 已经结束 left

    Es un instrumento de viento que quiero diseñar en solidworks para posteriormente hacer el corte/molde en un router de 2 ejes

    $242 (Avg Bid)
    $242 平均报价
    11 个竞标

    New project for solidworks drawings

    $16 / hr (Avg Bid)
    $16 / hr 平均报价
    1 个竞标

    I have a file i created in sketch up but I need it done is a different format matching any one of the following file types; IGES (.igs) STEP (.stp) SolidWorks (.sldprt) PTC Creo (.prt) Parasolid (.x_t and .x_b) ACIS (.sat) AutoCAD (.dwg, 3D only) Autodesk Inventor (.ipt) CATIA (.CatPart) Compressed folders

    $758 (Avg Bid)
    $758 平均报价
    59 个竞标

    take existing drawings - model the parts. Analyse for strength (will be provided). Modify based on my suggestions. Do a set of drawings.

    $883 (Avg Bid)
    $883 平均报价
    15 个竞标

    ...potential applicants: I am currently looking for experts in the following: CAD/AUTOCAD, RASPBERRY PI, SKETCHUP, ARDUINO, FUSION 360, 3D MAXX, SOLIDWORKS etc. in New Delhi area who are willing to join hands with a company that is currently building itself to achieve great heights in the service sector internationally! We are a small, well knit team that

    $813 (Avg Bid)
    $813 平均报价
    13 个竞标

    ...Lanka N., My name is KyDo. I'm a mechanical engineer and I have started working as a freelancer. So, getting a cient is difficult to me now. So, I really want to be worked with you to get more work experiences. If I can work with you, I will work for you free until you see I can do jobs well. Then, I want to be paid a li...

    $39 / hr (Avg Bid)
    $39 / hr 平均报价
    1 个竞标
    Project for Victor K. 已经结束 left

    ...K., my name is KyDo. I'm a mechanical engineer and I have started working as a freelancer. I really want to work with you to get more work experiences. If i can work with you, I will work for you free until you see I can do jobs well. Then, I want to be paid a little money for my work. You just have to pay 3$ per an hour I...

    $39 / hr (Avg Bid)
    $39 / hr 平均报价
    1 个竞标

    ...closures on Solidworks and Rendering using Keyshot. You will be provided pdf (and photographs of bottles when necessary) drawings for all bottles. There is scope for extension of project in the future as per our need. The models and renders will be used in catalogues and marketing materials. Quality and finish is of utmost importance. We would require

    $1178 (Avg Bid)
    $1178 平均报价
    32 个竞标

    Designing the 3-dimensional model of the chiller system using solidworks and lightly do the [登录来查看链接] take a look of sample picture of the model, which i have uploaded.

    $955 (Avg Bid)
    $955 平均报价
    69 个竞标

    I am trying to make the exact model in the attachment below but i'm not getting anywhere with it. I need to make the exact replica of the model, minor changes can be made if necessary

    $656 (Avg Bid)
    $656 平均报价
    16 个竞标

    The 3D model of few items we have available with us and it has created in SolidWorks format. And remaining item we can prepare as well. If the service provider can make 3D model themselves it will be well and good. In the videos, we need all around the exterior presentation of the ambulance with blinking all the lights and sound of the siren speaker

    $1242 (Avg Bid)
    $1242 平均报价
    20 个竞标
    install solidworks 2011 已经结束 left

    I need someone to install solidworks 2011 ***must be 2011 version so I can open files you send me**** this job is only to. send me a part as a test. see attached pdf drawing. draw it in soidworks then send me the file. this is the only thing to do. i need someone that can work in solidworks 2011 for some steel detailing work I have lots ...

    $23 / hr (Avg Bid)
    $23 / hr 平均报价
    21 个竞标

    structural steel detailing drawi...next 6 months. conditions: *******must be done in "solidworks 2011 edition" so i can open them****** !!!!!!do not bid you cant do in solidworks 2011 edition!!!!!!!!!!!!!! must be available to work today= and have good parametric practices. ability to draw in 2d in autocad or draftsight would be an advantage (dwg)

    $40 / hr (Avg Bid)
    $40 / hr 平均报价
    14 个竞标

    Currently an engineer student and below is a pdf regarding the designing and making g codes for the CNC. The project requires four simple components to be made into a single product. Components do not count if they increase in number, i.e 1 cylinder is counted as a component if there are 2 cylinders in the whole product.

    $242 (Avg Bid)
    $242 平均报价
    9 个竞标

    Drawing 3361 We have 3D (SolidWorks) files that need to be refined. We have 2D drawings call out specific specifications and tolerances. We desire to have the 3D file confirmed and or edited to reflect the 2D specifications. In all there are 15 specifications that need to be cross checked and either verified or edited to reflect the 2D specifications

    $781 (Avg Bid)
    $781 平均报价
    15 个竞标

    Edit a solidworks file

    $102 / hr (Avg Bid)
    $102 / hr 平均报价
    1 个竞标

    I need comprehensive drawings that I can use to send out and get quotes for manufacturing on. The design is a European registered Design which is protected for copyright reasons. If the person has pack flat assembly experience and can offer help on this it would be beneficial but not essential

    $1167 (Avg Bid)
    $1167 平均报价
    87 个竞标

    The 3D model of few items we have available with us and it has created in SolidWorks format. And remaining item we can prepare as well. If the service provider can make 3D model themselves it will be well and good. In the videos, we need all around the exterior presentation of the ambulance with blinking all the lights and sound of the siren speaker

    $2383 (Avg Bid)
    $2383 平均报价
    21 个竞标

    ...must be done in "solidworks 2011 edition" so i can open them must be available to work today and tomorrow. and have good parametric practices. ability to draw in 2d in autocad or draftsight would be an advantage (dwg) i have uploaded (project [登录来查看链接]) i have also uplaoded an example project done by me. (example [登录来查看链接]) i have uploaded...

    $34 / hr (Avg Bid)
    $34 / hr 平均报价
    12 个竞标

    I need a 3D model of something.

    $906 (Avg Bid)
    $906 平均报价
    46 个竞标
    Custom Solidworks macro 已经结束 left

    I have an assembly that is generated from a design table. I need a macro to iterate through the configurations and save each one as a new assembly but also save the parts out with a new name so I have a file for every size part that was generated. The assembly is a 4 sided box with a base and open top. There are 3 real parts in ...

    $875 (Avg Bid)
    $875 平均报价
    22 个竞标

    ...hiring developers full-time. The developer will be responsible for designing an e-commerce website and maintaining the site every month. We have a manufacturering facility located in Kuwait and we looking for a full-time web developer to work full-time on site there. The company will provide food, living space and transportation. If interested, please

    $5696 (Avg Bid)
    $5696 平均报价
    50 个竞标

    Hi Designers, I am looking for a designer to work with me on a modern study table design project. The table is being designed for kids between 9 - 15 years of age. I have basic design ready sketched on a paper. - The table will have a modular structure with ability to combine 2 or 3 individual design elements. - The table will have sliders compone...

    $789 (Avg Bid)
    $789 平均报价
    12 个竞标
    Modern Chair Design 已经结束 left

    Hi Designers, We are looking for a talented designer with a focus modern design to work with us on a chair project, which will later translate in a complete line with a table, coffee table, side tables, bookcases, cabinets, etc The design concept should encompass 3 key features: simplicity, originality, functionality, all within the modern design

    $1149 (Avg Bid)
    $1149 平均报价
    66 个竞标
    Project for Jitendra R. 已经结束 left

    Hi Jitendra R., im looking for a "solidworks 2011" deigner for steel detailing. structural steel detailing drawings from site measurements and engineering drawings, this work will be by the hour approximately 10-20 hours per week on an ongoing basis. must be done in "solidworks standard 2011 edition" so i can open them and have good parametric pr...

    $16 / hr (Avg Bid)
    $16 / hr 平均报价
    1 个竞标

    structur...will be by the hour approximately 10-20 hours per week on an ongoing basis. must be done in "solidworks standard 2011 edition" so i can open them and have good parametric practices. ability to draw in 2d in autocad or draftsight would be an advantage (dwg) I have attached an example of the type of work you will need to be proficient in.

    $397 / hr (Avg Bid)
    $397 / hr 平均报价
    31 个竞标
    Project for Osama H. 已经结束 left

    Hi Osama H., im looking for a "solidworks 2011" deigner for steel detailing. can you send me an example of your solidworks work. I will attach an example of the type of projects we need done

    $16 / hr (Avg Bid)
    $16 / hr 平均报价
    1 个竞标
    Solidworks Macros and API 已经结束 left

    Change macro's code that i have to get suitable results

    $203 / hr (Avg Bid)
    $203 / hr 平均报价
    16 个竞标
    Solidworks Macros 已经结束 left

    review macro code to get correct results

    $141 / hr (Avg Bid)
    $141 / hr 平均报价
    17 个竞标
    dibujo de envase 已经结束 left

    Requerimos dibujos en SolidWorks o equivalente para un envase industrial de nuestra propiedad, para luego poder hacer algunas modificaciones al mismo.

    $547 (Avg Bid)
    $547 平均报价
    23 个竞标

    Hello dear candidates! we're a prefab housing company with our own factory. We're looking for long time partners for CNC programming. we want you: [登录来查看链接] in the operation and related programming of CNC machine(five-axis engraving machine, tube laser cutting machine and flat plasma cutting machine); [登录来查看链接] in the use of various tools of

    $3649 (Avg Bid)
    $3649 平均报价
    23 个竞标

    注册或者登录后来查看详情。

    加精 加急 保密协议
    VR player frame 3D design 已经结束 left

    I want to make my own VR player. Please refer to attached file. I will make this VR player with 3D printer. Your outputs are 3D design files and solidworks files.

    $3813 (Avg Bid)
    $3813 平均报价
    28 个竞标

    Convert .ai file into a 3D CAD Solidworks file ifs/stp file that a mould can be made from

    $1047 (Avg Bid)
    $1047 平均报价
    50 个竞标

    i need you to do a 3d Frame model for the polaris slingshot using SolidWorks as i need the frame to do some Meshing and Static Analysis using ANSYS i don't have the dimensions you will need to look it up online and Of course approximate what you cant find and also use the attached image for reference

    $1516 (Avg Bid)
    $1516 平均报价
    34 个竞标

    We want to hire someone who can dynamically balance rotor in Solidworks and give us the mass and location for each plane from Solidworks study.

    $3071 (Avg Bid)
    $3071 平均报价
    27 个竞标
    servicio de solidworks 已经结束 left

    desarrollo de un proyecto, mecanizado, de productos,resistencia de [登录来查看链接] saludo gracias

    $1072 (Avg Bid)
    $1072 平均报价
    19 个竞标

    ***ONLY PEOPLE LIVING WITHIN A 30 MILE RADIUS OF WARRINGTON WILL BE CONSIDERED - we WILL NOT consider anyone outside this geographical area*** We have immediate and an ongoing opportunity to work us to create, modify, design, draw designer radiators and related parts. We are looking for a freelancer that can work from home but is able to visit our

    $250 / hr (Avg Bid)
    $250 / hr 平均报价
    21 个竞标
    Solidworks Freelancer 已经结束 left

    We have immediate and an ongoing opportunity to work us to create, modify, design, draw designer radiators and related parts. We are looking for a freelancer that can work from home but is able to visit our office/warehouse/showroom in Bolton or my home office in Northwich Now and then to get detailed job specifications and see the products up close

    $1111 (Avg Bid)
    $1111 平均报价
    40 个竞标

    We are in the business of setting up SME food processing and warehousing plants, we create sketchup drawings of...business of setting up SME food processing and warehousing plants, we create sketchup drawings of our projects and need them converted to a solid works model for drawing approvals for building code. Designer will habe to sign a strict NDA.

    $17580 (Avg Bid)
    $17580 平均报价
    50 个竞标