Cfd model jobs

筛选

我最近的搜索
筛选:
预算
项技能
语言
    工作状态
    1,084 cfd model 找到的工作,价格在 HKD

    Hi! we can work with you on CFD.. I have experience in the flow of aspirators and air ducts. Best Regards..

    $90 (Avg Bid)
    $90 平均报价
    1 竞标

    design and CFD simulate a wind turbine in order to evaluate its angle of attack and the coefficient of performance

    $1845 (Avg Bid)
    $1845 平均报价
    33 竞标

    Literature review Background Intro Mathematical methods Methodology Analysis discussion Conclusion Trends. etc

    $1020 (Avg Bid)
    $1020 平均报价
    25 竞标

    Literature review Background Intro Mathematical methods Methodology Analysis discussion Conclusion Trends. etc

    $1766 (Avg Bid)
    $1766 平均报价
    2 竞标
    cfd analysis 2 日 left

    A CFD analysis of solar collector is required...

    $276 (Avg Bid)
    $276 平均报价
    21 竞标

    A CFD analysis of solar collector is required to determine flow and temperature distribution

    $86 (Avg Bid)
    $86 平均报价
    2 竞标

    I need an expert in Fluid mechanics to solve my problems. Theoretical solutions should match with CFD analysis report. Should be expert in Pipe Routings / Pump / Navier Stokes Theorem / Bernoulli's theorem etc Should be a Physics expert Should be a practical knowledge If you have that skills, I will make you a millionaire with my project Specialists

    $809 (Avg Bid)
    $809 平均报价
    47 竞标

    ...am trying to run a CFD on through ANSYS that I need quite urgently, however when I try and mesh the file I get the error: "One or more entities failed to mesh. The mesh of the bodies containing these entities may not be up-to-date. However, meshing might be successful on the other entities". I only get this problems with the model when meshing in ANSYS

    $165 / hr (Avg Bid)
    $165 / hr 平均报价
    18 竞标

    ...am trying to run a CFD on through ANSYS that I need quite urgently, however when I try and mesh the file I get the error: "One or more entities failed to mesh. The mesh of the bodies containing these entities may not be up-to-date. However, meshing might be successful on the other entities". I only get this problems with the model when meshing in ANSYS

    $816 (Avg Bid)
    $816 平均报价
    33 竞标
    COMSOL CFD Simulation 已经结束 left

    A simple simulation using COMSOL CFD to evaluate the airflow speed through a Venturi

    $1539 (Avg Bid)
    $1539 平均报价
    23 竞标

    I have four models to investigate convection. Flat plate and finned plate in a duct both for free and forced convection. I am unsure that I mode...plate and finned plate in a duct both for free and forced convection. I am unsure that I modelled correctly therefore I would like a solidworks expert in Flow simulation and CFD to verify them for me please

    $4323 (Avg Bid)
    $4323 平均报价
    59 竞标
    Project for Jawad R. 已经结束 left

    CFD Analysis of A320 Sharklet

    $1177 (Avg Bid)
    $1177 平均报价
    1 竞标
    Cfd using star ccm+ 已经结束 left

    I need help on practical computational fluid dynamic using star ccm+ software

    $1005 (Avg Bid)
    $1005 平均报价
    7 竞标
    Ansys CFD simulation 已经结束 left

    A simple simulation through ansys to evaluate the wind speed through a channel

    $1123 (Avg Bid)
    $1123 平均报价
    43 竞标
    Help me write something 已经结束 left

    I need you to write some articles. We are looking for a writer for long-term collaboration, it is necessary to write articles from 600 to 1000 words, wri...need you to write some articles. We are looking for a writer for long-term collaboration, it is necessary to write articles from 600 to 1000 words, write about binary options, cfd, forex and crypto

    $235 - $1962
    $235 - $1962
    0 竞标
    design wind turbine 已经结束 left

    Use the CFD to evaluate the best angle of attack (AOA) and its power coefficient Cp

    $1664 (Avg Bid)
    $1664 平均报价
    37 竞标

    ...German. It is in the Forex/Online trading niche and would require knowledge of the jargon used in trading. To apply for this role, please reply with the answer to what is a CFD. This project has a lot of forex jargon, so please do not apply if you do not have knowledge in the niche. The candidate must be willing to complete the translation in a Google

    $1441 (Avg Bid)
    $1441 平均报价
    27 竞标

    CFD, FEA, FATIGUE analiz yapabilecek, yaptığı analizi yorumlayıp tarafımıza sunabilecek freelancer arıyoruz.

    $6971 (Avg Bid)
    $6971 平均报价
    4 竞标

    Generating Forex/Binary/Cfd/Crypto quality leads? Want to receive payouts up to 1000$ for you clients? My name is David Green and I am the VP sales of a very large diversified online group We are established since 2010. Working with over 1000+ affiliates providing us over 10000 leads per day! in mid 2015 we started to look for a niche where we can

    $785 (Avg Bid)
    $785 平均报价
    1 竞标

    Winglet Damage

    $1319 (Avg Bid)
    $1319 平均报价
    20 竞标

    ...of images of the 3D simulation results of an electronics cooling analysis of a circuit board within an enclosure. The following links provide examples of this kind of work. CFD ELECTRONICS COOLING IMAGES [login to view URL] [login to view URL]

    $2041 (Avg Bid)
    $2041 平均报价
    13 竞标

    ...of images of the 3D simulation results of an electronics cooling analysis of a circuit board within an enclosure. The following links provide examples of this kind of work. CFD ELECTRONICS COOLING IMAGES [login to view URL] [login to view URL]

    $1546 (Avg Bid)
    $1546 平均报价
    4 竞标
    Design Wind Turbine 1 已经结束 left

    Would be to design the turbine blade and develop a CFD simulation

    $1430 (Avg Bid)
    $1430 平均报价
    22 竞标

    ...of images of the 3D simulation results of an electronics cooling analysis of a circuit board within an enclosure. The following links provide examples of this kind of work. CFD ELECTRONICS COOLING IMAGES [login to view URL] [login to view URL]

    $573 (Avg Bid)
    $573 平均报价
    3 竞标

    ...kind of solar air heater system. The problem has already been formulated and a scheme of FVM ( structured mesh) developed accordingly. I need an expert in numerical methods, CFD and matlab to review the problem formulation and develop a code for the solution of the same. The freelancer should have an excellent knowledge in treating huge dimensions matrices

    $1193 (Avg Bid)
    $1193 平均报价
    27 竞标

    ...Proven working experience in mechanical engineering Working experience with product lifecycle management (PLM), finite element analysis (FEA) and computational fluid dynamics (CFD) Hands-on experience with computer-aided engineering (CAM) and computer-aided manufacturing (CAE) Familiarity with 2D or 3D engineering design and manufacturing tools (e.g.,

    $463 / hr (Avg Bid)
    $463 / hr 平均报价
    33 竞标

    As result of the project I expect the following: - Detailed test report containing the following details o Details of CFD setup and used methods/ parameters for simulation / material constants /number of nodes o Plots showing the tensile and shear stress in the EPDM structure o Deformation of structure o Pressure distribution

    $1459 (Avg Bid)
    $1459 平均报价
    11 竞标

    I need several CFD simulations in ANSYS Fluent or ANSYS CFX. First simulation should be the baseline, comparison simulation with 0% liquid injection and airflow around a GE-90 fan blade rotating at 3475RPM. Then, there should be three more simulations with liquid (50% methanol, 50% water) droplets injected into the engine and evaporating to cool it

    $1578 (Avg Bid)
    $1578 平均报价
    7 竞标

    SOLID Ingeniería, una empresa de servicios al sector de energía en Guatemala, desea contratar los servicios de un profesional que pueda realizar una simulación hidráulica a un rodete Francis Doble de una central hidroeléctrica bastante antigua (> 50 años) pero que se encuentra en operación. Los objetivos que se persiguen son, entre otros: A. Det...

    $29155 (Avg Bid)
    $29155 平均报价
    7 竞标

    ...of a crane boom that I need a CFD run on using ANSYS Fluid. The goal is to find the torque values acting around a certain point along the boom from a range of windspeed values and angles. For the project I just need someone to do up step-by-step instructions on how to setup the simulation in ANSYS that I can use to model all of the different windspeed

    $1201 (Avg Bid)
    $1201 平均报价
    33 竞标

    the online marketer role to bring in people would like to trade forex and cfd with licenced Broker with many facilities

    $78 (Avg Bid)
    $78 平均报价
    1 竞标

    the online marketer role to bring in people would like to trade forex and cfd with licenced Broker with many facilities

    $1962 (Avg Bid)
    $1962 平均报价
    3 竞标

    Basically, it is a simulation for hybrid nano particles Al2O3-TiO2 in water-ethylene glycol based fluids with varying the ratios of particles and fluids at different temperature. Hybrid nanofluids : Al2O3-TiO2 nanoparticles ratio is (3:1) with volume concentrations of 0.4%, 0.8%, and 1%. The spherical particle sizes of Al2O3-TiO2 are 20 nm and 23 nm, respectively. W-EG ratios of 30:70, 50:50, and ...

    $1879 (Avg Bid)
    $1879 平均报价
    19 竞标

    ...we try to use Inventor) but if it is not software specific then it's better. >> For computer aided engineering (CAE), we can use Autodesk Inventor and fusion 360, Autodesk CFD, MATLAB, software developed in-house for each project, COMSOL multiphysics and ANSYS multiphysics/workbench (but if we can avoid mentioning specific software too much is better)

    $3846 (Avg Bid)
    $3846 平均报价
    6 竞标
    CFD Simulaciones Turbinas 已经结束 left

    Estudio fluidodinámico y termodinámico del sistema de frenos de un vehículo de copetición

    $133 / hr (Avg Bid)
    $133 / hr 平均报价
    17 竞标
    CFD Simulaciones 已经结束 left

    Estudio fluidodinámico y termodinámico del sistema de frenos de un vehículo de competición.

    $141 / hr (Avg Bid)
    $141 / hr 平均报价
    11 竞标

    CFD Openfoam Pytho3 Realize a python3 script to perform a CFD analysis of wind movement on a given territory. The goal is to produce preliminary data for further analysis. The script uses as input a LAS file that represents a scatter plot representing the elevation of the soil for the given region. The area of ​​interest is the surface of a lake. All

    $2959 (Avg Bid)
    $2959 平均报价
    9 竞标

    ...someone who can do some basic CFD simulations on 1 to 3 building design options. The main purpose of the simulations would be see what the impact of wind would be on the building and making design choices to best suite the site orientations. This is very basic simulations. I design in Revit, so I will give you a 3D model to work from in what ever standard

    $47 / hr (Avg Bid)
    $47 / hr 平均报价
    30 竞标
    ANSYS and CFD Analysis 已经结束 left

    CFD Analysis and FEA simulation need to be done

    $303 (Avg Bid)
    $303 平均报价
    23 竞标
    Spray Nozzle Analysis 已经结束 left

    I have developed a Spray Nozzle and need some analysis work doing to determine flow characteristics inside the swirler element, determine flow and whatever...the work on first and prove the findings, the new design will then be compared against this. It won't let me put it under the skills but you will need ANSYS or some other CFD Analysis software

    $4351 (Avg Bid)
    $4351 平均报价
    46 竞标
    Data Entry Project 已经结束 left

    ... - do they offer guaranteed stop loss -do they allow scalping -do they allow hedging -minimum margin offered -maximum leverage offered -what services do they provide - CFD, Spread Betting, Binary Options, Forex I need data entry worker from various country...After completing work you need to submit me the result in a excel sheet...Newbies are

    $6971 (Avg Bid)
    $6971 平均报价
    17 竞标
    CFD simulaciones 已经结束 left

    Realizar simulaciones calentar y enfriar un disco de freno de automóvil. Se empezaría por simular el tiempo de enfriamiento de un disco a 500 grados girando a 1000 rpm. Si simulación OK, se realizarían más enfriamientos con otros dibujos. A continuación elevación de temperatura per efecto del frenada. Se suministrarían datos. Un saludo!

    $1523 (Avg Bid)
    $1523 平均报价
    6 竞标
    Perform for me CFD 已经结束 left

    I am looking for a person who is good in performing CFD analysis. I have product for which I want to determine its thermal and humidity hotspots. I will provide the: 1) dimensions of the product, 2) material used in making product and 3) temperature and humidity conditions of external environment. Based on these data, I would like to know what will

    $967 (Avg Bid)
    $967 平均报价
    21 竞标

    ...thermal-hydraulic analysis methods, from steady state one dimensional network hydraulic analysis to transient, three dimensional, eddy resolved computational fluid dynamics (CFD) calculations. • Perform code benchmarking and validation analyses to support code qualification and methodology development. • Perform calculations using first principles

    $785 (Avg Bid)
    本地
    $785 平均报价
    1 竞标

    ...we try to use Inventor) but if it is not software specific then it's better. >> For computer aided engineering (CAE), we can use Autodesk Inventor and fusion 360, Autodesk CFD, MATLAB, software developed in-house for each project, COMSOL multiphysics and ANSYS multiphysics/workbench (but if we can avoid mentioning specific software too much is better)

    $4121 (Avg Bid)
    加精 加急
    $4121 平均报价
    17 竞标

    ...fire safety engineer who fulfil requirements below: -possess minimum qualifications of degree in Science/Engr -possess specific experience in Computational Fluid Dynamics (CFD) and specific proficiency in using the FDS (i.e. Fire Dynamics Simulator & FDS+EVAC) software by NIST or its commercial interface Pyrosim / pathfinder to be able to Jobs will

    $110 / hr (Avg Bid)
    $110 / hr 平均报价
    3 竞标
    CFD ANSYS 2D PROBLEM 已经结束 left

    contact me for more info!! only CFD ANSYS expert can apply

    $196 (Avg Bid)
    $196 平均报价
    6 竞标
    Python script writer 已经结束 left

    I run an engineering consultancy specialising in analysis. I use Autodesk CFD and need a python script written to extract a time history of results.

    $4451 (Avg Bid)
    $4451 平均报价
    34 竞标
    CFD Mathematics 已经结束 left

    CONTACT ME MORE INFO....................

    $141 (Avg Bid)
    $141 平均报价
    5 竞标