Firmware工作

筛选

我最近的搜索
筛选项:
预算
类型
技能
语言
    工作状态
    6,016 firmware 搜到的工作,价格货币为 HKD

    Expectation/deliverables: Demonstrate a complete mesh network distributing data, for example, the camera input, through the mesh backbone network to the central server. A complete mesh network prototype with SDN functionalities Mesh network should be able to self-heal, self-configure, scale seamlessly. End-nodes should be able to join or leave the network seamlessly and dynamically. The mesh netwo...

    $10655 (Avg Bid)
    $10655 平均报价
    8 个竞标

    As part of an on-going project I want to make a small-scale implementation of the following SDN based mesh network set-up. Expectation/deliverables: Demonstrate a complete mesh network distributing data, for example, the camera input, through the mesh backbone network to the central server. A complete mesh network prototype with SDN functionalities Mesh network should be able to self-heal, self-co...

    $63 (Avg Bid)
    $63 平均报价
    1 个竞标

    Starting from design of circuit, components selection, PCB design and firmware development this project involve complete skill required for development. I will prefer developer with past experience in such projects. Those who are interested shall send the reference of project done on similar line. Experience in Smartphone design will be added advantage

    $15949 (Avg Bid)
    $15949 平均报价
    5 个竞标

    Creating a firmware in python3 for Raspberry. Firmware must be able to work as a function from other code. As soon as the function is called, the PN532 is activated to read the tag. Once a tag has been detected, it will be returned as JSON. The tag to be read is a Ndef message like text/plain. this is a smal project an can be finished in one day

    $822 (Avg Bid)
    $822 平均报价
    8 个竞标

    Firmware hack on segway minipro to allow for higher speeds

    $157 (Avg Bid)
    $157 平均报价
    1 个竞标
    STM32F429 OTA using a EPS32 5 天 left
    已验证

    I want to use as ESP32 to upload the firmware of my STM32F429

    $1769 (Avg Bid)
    $1769 平均报价
    18 个竞标

    Looking to discuss an automotive firmware project. Code is misra c for arm cortex using freescale codewarrior toolchain. First task is approximately 4-8 hours work

    $274 / hr (Avg Bid)
    $274 / hr 平均报价
    28 个竞标

    1. INTRODUCTION We has recently developed a new electronic PCB control interface based on existing PCB product but adding some new features. The purpose of this document is to define the requirements for a new firmware development. 2. PCB HARDWARE PCB is an embedded hardware design based on PIC24 microcontroller. This are the main elements involved in this firmware upgrade: • PIC24FJ1...

    $32616 (Avg Bid)
    $32616 平均报价
    37 个竞标

    We need applications that make it possible to update a Texas Instruments F280049 Microcontroller via CAN. The software includes: Client-side application: This application takes a given hex file (compiled firmware) and transmits it via CAN to the F280049 MCU. MCU-side application: This application takes the received hex file and writes it into flash / updates it's firmware. The Software sho...

    $19283 (Avg Bid)
    $19283 平均报价
    17 个竞标

    For our firmware on raspberry we would like to have a function where we send a photo to and the function returns response back. We also want to use this function on our Ubuntu server. Create a firmware function on raspberry Pi 3 and Ubuntu that recognize face of person. - Detect liveness - detect male or female - detect tired, gloomy, sad - check face on local DB / base64 image (not file) for re...

    $2782 (Avg Bid)
    $2782 平均报价
    22 个竞标

    Need to design firmware to build MQTT gateway with following details [登录来查看链接] for STM32 + sim800 + SPI flash memory 2. Gateway need to publish data received on uart of STM32 gate way from mother board 3. Gateway need to subscribe topic and when data recieved send that data to mother board via uart 4. Gateway need to check atleast once/twice a day for new firmware available on server. 5. If new fi...

    $4659 (Avg Bid)
    $4659 平均报价
    8 个竞标

    ## Automatic messages will not be answered ## This project is based in the remote control of a Sony camera model AX53: [登录来查看链接] The camera will be mounted on a Robot. The robot move the camera and zoom. The main porpoise of this project is to control the camera remotely. We will use a tablet running on windows 10 to command this system. It means that we will have the following devices: Son...

    $1644 (Avg Bid)
    $1644 平均报价
    4 个竞标

    We are an innovative iOT startup that is currently developing a product line of smart products called smartThink. Our current products are a heated jacket and a heated seat. Our goal is to build a low cost yet high-performance PCB with embedded BLE microprocessor chip and temp sensor module that (1) powers carbon fiber heat pads and (2) feeds real time temp data to a mobile app which is also used ...

    $8949 (Avg Bid)
    $8949 平均报价
    26 个竞标

    I need you to design a main PCB board to operate two-wheel BLDC hub motors and a few auxiliary components e.g. lights. You will also design a small joystick logic to talk with the main PCB board. So we want to use as many pre-built electronic modules as possible to simplify the design task. All the pre-built modules have already been selected. Specific model numbers will be provided in private ch...

    $4862 (Avg Bid)
    $4862 平均报价
    21 个竞标

    Looking for electronic product development experts who can design a Fingerprint Sensor padlock with Bluetooth interconnectivity with a mobile phone app. User should be able to store the fingerprint on the device and device unlocks if the stored fingerprint is a match. Looking for small packaging with small fingerprint sensor integration. Freelancer should be able to do proper sensor selection, el...

    $9786 (Avg Bid)
    $9786 平均报价
    1 个竞标
    LED Driver Controller 已经结束 left

    We have designed an LED driver PCB that we need to finish writing firmware for. We need to take in digital and analog inputs and send SPI signals to the LEDs.

    $391 / hr (Avg Bid)
    本地 加急 保密协议
    $391 / hr 平均报价
    2 个竞标
    SONIX SN95303FG Firmware 3 小时 left
    已验证

    Hello guys. I am looking for SONIX SN95303FG Firmware Development Tool. If you have any idea, please contact to me Thank you

    $235 - $1957
    $235 - $1957
    0 个竞标

    Looking for someone to create an Arduino [登录来查看链接] file and setup a variant.c and variant.h for a custom board that uses the SAMD21J18A. Then possibly help with customizing some firmware to load on the device from the Arduino IDE.

    $3766 (Avg Bid)
    $3766 平均报价
    19 个竞标
    FPGA DESIGN ENGINEER 已经结束 left

    We are seeking 1 FPGA Design Engineer for our new product development. FPGA Design Engineer Responsibilities: • Completing implementation in RTL • Ensuring robust and complete timing constraints • Optimizing FPGA code to balance performance, area, power, complexity and timing • Determining and executing development, integration, bring-up and test plans. • Working closely ...

    $290 / hr (Avg Bid)
    $290 / hr 平均报价
    25 个竞标
    Mobile APP - ioT devices 已经结束 left

    The scope of work is to remodeling an APP based on an existing version, that is already in place, changing some things and add another functionalities. All source codes will be delivered as the icon images in different formats. Basically we need a freelancer to provide a new version of this APP. – “Sources in Ionic 3” This APP communicates to a HUB trough a WiFi router or Access...

    $2137 (Avg Bid)
    $2137 平均报价
    26 个竞标
    AVR Firmware Modification 已经结束 left

    I have firmware for an ATTINY841 that measures frequency. I think it's capped at reading a 1khz signal. I need to be able to read up to 350khz down to about 5khz. There is other functionality in the firmware that can be removed (adc readings etc). I can share the source code with those interested. I think this is a fairly simple project for someone that works with avr regularly.

    $235 (Avg Bid)
    $235 平均报价
    2 个竞标

    We need some help with development of a customized AOSP ROM for our gaming device prototype. We're looking for open, talented and positive person to join our tiny distributed team for solving a particular AOSP build issues for now (a couple of evenings, most likely).

    $1307 (Avg Bid)
    $1307 平均报价
    6 个竞标

    We must modify our Embedded C firmware in order to send and receive data over BLE GATT protocol. We have an iOS and Android application that sends and receives commands over BLE to our custom hardware device. Previously we were using Bluetooth Classic but this is not possible on iOS without MFi certification (which we will not get) so we are changing to BLE.

    $4384 (Avg Bid)
    $4384 平均报价
    34 个竞标

    Hi, I have designed a PCB board with ESP32 WROOM module, BMD340 module, and some sensors. I'm now working on the firmware with BMD340. I'm looking for an embedded software exert to help me.

    $1378 (Avg Bid)
    $1378 平均报价
    16 个竞标

    I believe that need to change the printer's firmware to trick the sheet sensors. For example: I need to place to print 5 copies of a page that is 150mm tall. He has to print the 5 copies 1 stuck in the other. If you put 100 copies,... And so on. The same this: [登录来查看链接]

    $9160 (Avg Bid)
    $9160 平均报价
    11 个竞标

    I have a task related to firmware development GUI interface. DMX512 addressible piels /4 LED's each with 5 wire lights in 24v system. It must be cloud based Wifi accessible and compatible with IOS and Andriod. 1. Light size with casing 40mm 2. 4 Led per light 3. 4 lights per meter-1000mm 4. 24v 5. RGBW cihps - DMX512C3 IC ( The manufacture is called UCS will share complete details in chat

    $1715 (Avg Bid)
    $1715 平均报价
    9 个竞标
    Firmware (FGPA) 已经结束 left

    An expert to develop firmware for SCD. Only Electrical engineer should bid

    $282 (Avg Bid)
    $282 平均报价
    3 个竞标
    Firmware(FGPA) Expert 已经结束 left

    an expert to do simple task on firmware. Only Electrical engineer should bid

    $376 (Avg Bid)
    $376 平均报价
    3 个竞标

    I would like an LED matrix controller constructed and programmed with the following properties: Be connected to a small speaker for playing audio. Also speaker must be able to randomly select audio from multiple files each time it is activated. I would like the LED matrix to also display from a random list of animations each time it is activated. I would like there to be two actuators to also r...

    $4439 (Avg Bid)
    $4439 平均报价
    21 个竞标

    I would like an LED matrix controller constructed and programmed with the following properties: Be connected to a small speaker for playing audio. Also speaker must be able to randomly select audio from multiple files each time it is activated. I would like the LED matrix to also display from a random list of animations each time it is activated. I would like there to be two actuators to also ...

    $1574 (Avg Bid)
    $1574 平均报价
    7 个竞标

    Hi Miftahul Arrijal R., Hi I am from Lima-Peru. I need to quote me the design and construction of the following prototype cards (as smaller as possible): It will be a emergency panic button. Normally the circuit is sleeping, and when i push a button, it will be wake up the microprocesor, run its program that send a mqtt message of the alarm. It is based in this board: [登录来查看链接] On that page the...

    $783 (Avg Bid)
    $783 平均报价
    1 个竞标

    Micro Controller Programmer - Chip family example - ATSAMD51J18A Require firmware programming for Cortex-M4 Product Family MCU's. Firmware capability is to use 3 UART's with DMA channels and interrupts and CRC generations.

    $30862 (Avg Bid)
    $30862 平均报价
    23 个竞标
    Firmware Debugging 已经结束 left

    I need a firmware engineer for resolve the issues that described in the attached [登录来查看链接] code developed in Iar workbench and the device using the cc1110 of Ti.

    $4977 (Avg Bid)
    $4977 平均报价
    22 个竞标
    pcb and firmware 已经结束 left

    Need some changes on firmaware for connecting physical sensors nrf52832 and 332 soft device. Other details will be given later.

    $4071 (Avg Bid)
    $4071 平均报价
    27 个竞标

    We are an innovative iOT startup that is currently developing a product line of smart thermal products called ThermoThink. Our current products are a heated jacket and a heated seat. Our goal is to build a low cost yet high-performance PCB with embedded BLE microprocessor chip and temp sensor module that (1) powers carbon fiber heat pads and (2) feeds real time temp data to a mobile app which is...

    $164 / hr (Avg Bid)
    $164 / hr 平均报价
    32 个竞标

    Hi, we are looking for firmware development and Mobile app development for our RGBW smart bulb project. We will be using Telink BLE5 Module.

    $13043 (Avg Bid)
    $13043 平均报价
    17 个竞标

    We have developed a new type of Virtual Reality input device for use in games and VR experiences on the Steam Games Platform. This device has firmware running on a microprocessor, and has a partially developed device driver for Windows, which converts multiple inputs into a Virtual HID device for controlling VR games in Steam. We need someone to: * extend the device driver to allow joystick/key...

    $11595 (Avg Bid)
    $11595 平均报价
    21 个竞标

    More details will be shared via chat

    $3648 (Avg Bid)
    $3648 平均报价
    2 个竞标

    Autonomous Two Wheels Balancing Robot Project Based on Arduino Programming(Firmware+Hardware)

    $6075 (Avg Bid)
    $6075 平均报价
    36 个竞标

    More details will be shared via chat

    $172 (Avg Bid)
    $172 平均报价
    3 个竞标

    More details will be shared via chat

    $172 (Avg Bid)
    $172 平均报价
    1 个竞标
    GPS - Firmware Assistance 已经结束 left

    Good Day, If you would have any experience around the U-Blox product line, we are looking for your assistance. We are utilizing specifically the Max-M8 GPS chip on a standard breakout board for a prototype project. I am enclosing the related documents if this is something you can work with. We are not specifically looking for ground up development of firmware, but to get the chip running the way ...

    $1065 (Avg Bid)
    $1065 平均报价
    7 个竞标

    Looking for a unix software engineer to modify scripts on an Axis camera. Currently upon detecting motion the camera captures a short video clip (~3MB) and will want to upload this via an ethernet connection to a remote server. The ethernet is connected to a modem that powers on when motion is detected. It takes 50 seconds for modem to come online. This is important to have the modem toggled by...

    $4063 (Avg Bid)
    $4063 平均报价
    16 个竞标

    **PLEASE, NO BIDDING BEFORE READING FULL DESCRIPTION** We require an API for Windows to be developed in ASP.NET, to interact with a board that connects to a computer via USB. The communication with the board is to be accomplished through AT commands. Some of required functionalities 2 types of commands, - Functional - related to the operation of inputs and outputs - Informative - Help List o...

    $1386 (Avg Bid)
    $1386 平均报价
    5 个竞标

    I have the device with CY7C68013A Cypress USB controller and need help with firmware and driver. Please contact me if you have experienced in it.

    $16840 (Avg Bid)
    $16840 平均报价
    16 个竞标

    More details will be shared via chat

    $125 (Avg Bid)
    $125 平均报价
    3 个竞标

    More details will be shared via chat

    $157 (Avg Bid)
    $157 平均报价
    2 个竞标

    Need to extend a working firmware, using mbed-os and nrf_sdk to add - Device Firmware Update (DFU) over serial uart (working with linux) - Extends bluetooth features allowing multiple device connections A variable-length packet data exchange model is already defined with which the device communicates with the application in linux

    $10354 (Avg Bid)
    $10354 平均报价
    23 个竞标
    embedded system, atmel 已经结束 left

    Atmel ATmega8 & Atmega128au, firmware development needed. Have machine with wireless transponders with poorly developed firmware. Manufacture is no help. Possible to pull firmware from devices & repair bad input? Or develop new firmware.

    $4040 (Avg Bid)
    $4040 平均报价
    26 个竞标

    I need to develop scrolling dot matrix for 5x7 dot matrix module 6 connected in series. I have basic hardware designed. I need firmware development for the same.

    $2748 (Avg Bid)
    $2748 平均报价
    23 个竞标

    精选firmware社区文章