筛选

我最近的搜索
筛选项:
预算
类型
技能
语言
    工作状态
    95 imx6 份搜到的工作,货币单位为 HKD

    GUI development I am looking for a skilled software developer to work in a small team to develop a GUI for energy storage monitoring. Skills and Experience: - GUI development - touchscreen Freescale iMX6 processor - CAN Bus communications - AI implementation Project Scope: - This project is part of a larger project, so it is important for the freelancer to understand the overall scope and objectives. - The timeframe for this project module is medium, ranging in excess of 4 weeks. Application Requirements: - Successful freelancers should include their relevant experience in GUI development, CAN Bus, microcontrollers. - Past work examples related to energy storage or similar projects would be highly beneficial. - It is also important for freelancers to provide detailed project ...

    $129 / hr (Avg Bid)
    $129 / hr 平均报价
    18 个竞标

    We are sea...the PPS. Lattice ECP5 on a custom board There are 2 external interfaces to an IMx6 SPIM: Spi Slave, the Master is a Imx6 processor, which is used to write and read internal registers and ADC’s registers. Details on the protocol in the FDD SPIS: Si Master, the data acquired from the ADCs are packed and sent to the external IMx6 Modifications ADD MEMS Accelerometer, ADXL355 channel modify the data stream, adding 8th channel. A review of protocol might be needed ADD Registers to control DAC and discretes ADD DAC. We can share a DDS to generate arbitrary waveforms, sine and pulses Connect some LED to internal registers controlled by SW Other activities Test and debug on a custom board with a iMX6 connected. the iMX6 will not be part of th...

    $3537 (Avg Bid)
    $3537 平均报价
    19 个竞标

    Linux embedded SW developer, iMX6/Zynq we are looking for a skilled Linux embedded software developer to work on a project involving the iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dts and rootfs, and we already started testing of he Master SPI (we will share code). SPI Slave has to be developed from scratch OS built with Yocto

    $4512 (Avg Bid)
    $4512 平均报价
    21 个竞标

    I am looking for someone with experience developing Embedded Linux Kernel & Rootfs compiling for an IMX6 SBC. The SBC manufacturer has already provided the kernel sources as well as rootfs sources along with instructions. The uboot sources are not provided. I need someone who can do some minor customisations with the kernel and file system to improve boot time, to add facility to automatically update the firmware using ethernet, to change the debug serial port to some other port. To configure other pins for GPI/Os etc. Candidate with suitable experience only apply. Need to get this done in 1 to 2 weeks time. The Details of the Single Board Computer are as follows: CPU: Architecture: Cortex-A7 Frequency: 528MHz RAM: 256MB DDR3 ROM: 256MB NandFlash System: Linux4.1.15+QT...

    $2824 (Avg Bid)
    $2824 平均报价
    5 个竞标

    I am looking for someone with experience developing Embedded Linux Kernel & Rootfs compiling for an IMX6 SBC. Specifically, I need a custom build of the Linux Kernel and Rootfs for the target platform that will use an Ubuntu-based operating system. I have a specific version of the kernel and rootfs in mind, which I will provide. In addition, I need someone to create custom drivers or modules for the Kernel, as well as optimize its performance or size. The successful candidate should be highly experienced in Linux Kernel and rootfs compiling and development and have previous experience working with the target platform. The Details of the Single Board Computer are as follows: CPU: Architecture: Cortex-A7 Frequency: 528MHz RAM: 256MB DDR3 ROM: 256MB NandFlash System:

    $3236 (Avg Bid)
    $3236 平均报价
    4 个竞标

    ...providing documentation throughout the development process. To be considered for this project, please submit a proposal detailing your experience with FPGA development, embedded Linux systems, and Linux driver development. Please also include links to any relevant completed projects that you have worked on in the past. A custom FPGA boards interfaces with 7 ADC and an iMx6 external SODIMM module. there is a Master and Slave SPI on the iMx6. Master is used to program internal registers of the FPGA (we tested it with a simple code and its working). The Slave is used to capture data sent by the FPGA (ADC data). The Linux SPI driver to control the external FPGA shall be written and tested. The FPGA has been tested in simulation, the integration on hardware and small bug fixi...

    $4798 (Avg Bid)
    $4798 平均报价
    8 个竞标

    We have started with a working Yocto Dunfell release from NXP that provides a limited OS. We have a layer from other manufacturers that permits building a Ubuntu-like release in Yocto, but are having trouble getting this layer to work with the NXP Dunfell.

    $242 / hr (Avg Bid)
    $242 / hr 平均报价
    7 个竞标

    Help with Eclipse project configure/build/compile of OpenGL ES Environment: - Toradex Colibri iMX6 (ARM Cortex) SoM board setup with LCD display - TDX Wayland with XWayland 5.7.0+build.20 (dunfell) Linux distribution - Eclipse IDE (available on Win10 PC and on Ubuntu 16.04) - GCC Linaro cross compilation toolchain (available on Win10 PC and on Ubuntu 16.04) - Root_fs for target SoM Development environment installed and configured. Basic ‘hello world’ written in C successfully compiles under Eclipse on Win10 and on Ubuntu 16.04. Compiled code successfully runs on target SoM iMX6 board. Task description: It is required to compile under Eclipse environment the sample C code that can runs basic (hello world type) OpenGL ES1.1 and ES2.0 examples on target SoM. Th...

    $1377 (Avg Bid)
    $1377 平均报价
    10 个竞标

    Hello! I seek for help in setup of Development Environment (Linux based) for SOMs made by Toradex (iMX6, Tegra T30) for Yocto Linux Embedded and for Torizon layer (over same Yocto). It is required to setup development environment and provide basic step by step on how to run/add/embed/rebuild etc tasks. Simple "Hello World" for OpenGL, GPIO, CAN and LVDS/RGB will be required. Detailed description of the project is provided in attached document. Thank you

    $1706 (Avg Bid)
    $1706 平均报价
    5 个竞标

    Getting Fedora up and running on a imx6 based SOC, with some UI work.

    $391 / hr (Avg Bid)
    $391 / hr 平均报价
    8 个竞标

    If you have worked on iMX6 device drivers please contact me.

    $1096 (Avg Bid)
    $1096 平均报价
    1 个竞标

    Develop embedded Linux kernel and applications or containers to run on Torizon (contractor choice and resource dependent) for a mobile industrial controller/gateway application. Initial development sprint requires code to bring up and test I/O and comm break out boards. Based on contractor performance and results, project may be expanded to include additional deliverables and milestones.

    $250 / hr (Avg Bid)
    $250 / hr 平均报价
    10 个竞标

    ...We are a UK company using embedded Linux on a project in vehicles. We are experiencing an issue where the available Nand Flash reduces over a large number of shutdown/boot cycles (as the vehicle ignition is turned on/off). The net result is that the available storage space eventually becomes zero and our application fails. The CPU and Linux versions we are using is as below: - CPU – Freescale iMX6 - Linux Version – 3.14.38 - 256MB Nand Flash. We have tested using different YAFFs and power on/off commands. We are seeking an expert who understands the Linux Kernel and NAND Flash memory management/YAFFS to assist us in the direction to find a solution and also help us best manage the NAND Flash for longevity. Please apply by stating your detailed and specific exp...

    $203 / hr (Avg Bid)
    $203 / hr 平均报价
    3 个竞标

    Hi Dmitry M., I have some issues booting from an customized imx6 image. Maybe you could have a lot at it via screen sharing. You get paid even you dont manage to fix the issue

    $399 (Avg Bid)
    $399 平均报价
    1 个竞标
    Project for Dmitry M. 已经结束 left

    Hi Dmitry M., I have some issues booting from an customized imx6 image. Maybe you could have a lot at it via screen sharing. You get paid even you dont manage to fix the issue

    $399 (Avg Bid)
    $399 平均报价
    1 个竞标

    IMX6 SOM running debian - jessie fresh install with wifi card () installed. SSH to system and connect board to wifi network. Following product document with reproducible steps taken.

    $290 (Avg Bid)
    $290 平均报价
    2 个竞标
    PCB Design 已经结束 left

    PCB design incorporating changes to existing board design and reference schematics. Board is a carrier board for IMX6 SOM with ethernet, Serial, SPI communications.

    $4492 (Avg Bid)
    $4492 平均报价
    34 个竞标

    This project is a part of the of porting or BSP (u-boot, device-tree, and linux customization and compilation). For starters the the following task needs to be done: We had UART1 on non-default pads. We managed to reroute the signal through iomuxc and setting UART to DTE mode. We have the microSD pads on the default SD2 or same as the development b...the signal through iomuxc and setting UART to DTE mode. We have the microSD pads on the default SD2 or same as the development board. However, currently uSD card / interface is not detected. This is the only method of boot we have available in our custom board. - Therefore, necessary changes to u-boot source files, device-tree bindings, etc. needs to be done to detect and uSD and/or setup uSD for imx6 boot configuration or identify ...

    $986 (Avg Bid)
    $986 平均报价
    1 个竞标

    I'm looking for a custom board designer/ PCB/Embedded Engineer who can understand my requirement to design RPI zero form factor board using NXP IMX6

    $4711 (Avg Bid)
    $4711 平均报价
    10 个竞标

    help with porting existing system from NXP IMX6 Android 8 to Quectel SC66 (QCOM SDM660) Android 9.0 Few system Linux apps such as ssh and vnc server needs rework. also you'll have to fix the SEPolicy. VNC server needs a little rework because the screen capture and display functions are deprecated or changed. I will provide all details when you are ready. deadline is 1 week, at maximum. only serious engineers. compensation is negotiable with my CEO.

    $9141 (Avg Bid)
    $9141 平均报价
    5 个竞标

    Need design assistance for embedded design using iMX8 processor. Great experience with iMX6/8 processors required, established contacts and sources of iMX8 processor related information. Excellent previous designs history, hardware design and if possible Linux.

    $258 / hr (Avg Bid)
    $258 / hr 平均报价
    7 个竞标

    Design and code an automotive cluster based on Software. Write code to allow working of the device on a J1939 vehicle. Code and design should be done to fit a 10.1" Capacitive touch screen with interaction. Hardware used: Toradex iMX6 SoM with Ixora V1.1a Developers board. Interaction should display Vehicle statusses. eg. Voltage, suspension, air pressure of commercial vehicle, fuel economy. Trip Meter should be resettable. ODO meter should be stored on Flash and secured as to not be changeable by normal user. Service/Admin Screen should allow login of authorized person with ID and Password. Service menu will allow calibration of speed factor, odo meter, brightness, etc. All info displayed should strictly be J1939 Data on CAN 250kbps

    $9837 (Avg Bid)
    $9837 平均报价
    20 个竞标

    Design and code an automotive cluster based on Software. Write code to allow working of the device on a J1939 vehicle. Code and design should be done to fit a 10.1" Capacitive touch screen with interaction. Hardware used: Toradex iMX6 SoM with Ixora V1.1a Developers board. Interaction should display Vehicle statusses. eg. Voltage, suspension, air pressure of commercial vehicle, fuel economy. Trip Meter should be resettable. ODO meter should be stored on Flash and secured as to not be changeable by normal user. Service/Admin Screen should allow login of authorized person with ID and Password. Service menu will allow calibration of speed factor, odo meter, brightness, etc. All info displayed should strictly be J1939 Data on CAN 250kbps

    $10119 (Avg Bid)
    $10119 平均报价
    15 个竞标
    Required layout reviewer 已经结束 left

    I need to detail study about DDR3 , DDR3L,LPDDR3 ,so i need a layout tutior for high speed design ,Tools used : Altium and Orcad. For reference we will take iMX6 Rex open design source.

    $8 / hr (Avg Bid)
    $8 / hr 平均报价
    2 个竞标

    We require to use Debian Jessie on a Solid Run Hummingboard2 Gate, the device uses an IMX6 SOM, we can not get the image provided by solid run, debian Jessie - Mate, to allow the device to enter a suspend mode and resume from awake. Currently Sketch and buster work with this function - but the graphics module doesnt work. for example, we need to be able to rotate the screen to the right, and all other distros dont work due to graphic drivers. unless someone can compile the graphic drivers to work then all our issues would be solved. currently we have Debian Jessie working with everything we need - except for the sleep function which must work. we have to be able to wake up the device with a usb device (this works in all other distros) No messing around - I want serious people on...

    $3013 (Avg Bid)
    加急
    $3013 平均报价
    5 个竞标

    Looking for a programmer who can: Code an ARM Application processor with out the OS (Linux). It could be an RTOS or a Non-RTOS based on your choice. Processor would be for example imx6, ARM9 or similar. The job is to encode 720P raw video from the sensor and save to sd card. It will also take the image if configured so. After this the processor will go in to power saving mode. and with an external trigger it would repeat the job. Other than above, we need to copy video and images from sd card to a USB storage. Lets discuss in details and please bid only if you have good experience. Note: This is not An Arduino or raspberry project!

    $2575 (Avg Bid)
    $2575 平均报价
    10 个竞标
    Project for Nick B. 已经结束 left

    Amazon Alexa kind of version both mini and big one( from client requirements to mass manufacturing), SOHO product, IP camera , smart power plug, smart IR blaster, BLE, ZigBee , WiFi, ZWave , NFC , ble 5, Burn in board , daughter boards , motherboards , processor based projects like imx6 , am3352, am3354. controller based design like stm32, Msp430 etc., RF antenna design.

    $332 - $332 / hr
    $332 - $332 / hr
    0 个竞标
    QEMU expert needed --2 已经结束 left

    I m currently working on project to emulate an nxp imx6 device but having tough time. Looking for an absolute qemu expert who can review the work done so far and guide in success of completion. Complete project details will be disclosed after discussion

    $297 / hr (Avg Bid)
    $297 / hr 平均报价
    2 个竞标
    QEMU expert needed 已经结束 left

    I m currently working on project to emulate an nxp imx6 device but having tough time. Looking for an absolute qemu expert who can review the work done so far and guide in success of completion. Complete project details will be disclosed after discussion

    $313 / hr (Avg Bid)
    $313 / hr 平均报价
    7 个竞标

    I am looking for an occasional consultant to assist with configuring uboot and Yocto for various embedded systems that I work with. The initial task will be quite simple, I have an AWS instance that you can login to, modify the appropriate bitbake recipes in Yocto to make u-boot delay its startup from 3 seconds to 10. If work on this relatively simple task goes well then we can discuss further cooperation. Preference will be given to candidates in the Czech Republic, Slovakia and Serbia. Knowledge of C++/Qt will also be a beneficial for other projects that I may need assistance with.

    $282 / hr (Avg Bid)
    $282 / hr 平均报价
    16 个竞标

    I have a web app (NodeJS, imx6 processor, webRTC, gstreamer) that works on my personal computer but it doesn't on my embedded system. I'm searching for someone to solve this

    $4594 (Avg Bid)
    $4594 平均报价
    12 个竞标

    I need someone to build wpe-webkit using the instructions from this site: :imx6:software:os:yocto:wpe-webkit. Has to use most current sources and replace link of git clone --branch sumo and use manufacturer repository: image will be tested and has to work on solid run hummingboard. All steps have to be documented so as to be replicable by me.

    $196 (Avg Bid)
    $196 平均报价
    1 个竞标

    We will be using SOM chip from variscite.com. it is iMX6 SOLO. I want to hire someone to MODIFY the existing SOLO CUSTOM BOARD with the following changes (existing DXF links below). 1. Update the Ethernet to be POE 2. remove the HDMI connector 3. remove USB Type Micro-AB (USB OTG/HOST only) so there are ONLY two USB Type A (USB-HOST) connectors (the leave the USB Type Micro-AB for UART should not be touched) 4. remove Digital Mic connector 5. remove Stereo Jack (line in) 6. replace Stereo Jack (headphones) with an external speaker. 7. Remove the ON/OFF connection. Power should be on as soon as it is plugged in Carrier board details, schematics, DXF Files and more can be found at:

    $2324 (Avg Bid)
    $2324 平均报价
    11 个竞标

    We will be using SOM chip from variscite.com. it is iMX6 SOLO. I want to hire someone to MODIFY the existing SOLO CUSTOM BOARD with the following changes (existing DXF links below). 1. Update the Ethernet to be POE 2. remove the HDMI connector 3. remove USB Type Micro-AB (USB OTG/HOST only) so there are ONLY two USB Type A (USB-HOST) connectors (the leave the USB Type Micro-AB for UART should not be touched) 4. remove Digital Mic connector 5. remove Stereo Jack (line in) 6. replace Stereo Jack (headphones) with an external speaker. 7. Remove the ON/OFF connection. Power should be on as soon as it is plugged in Carrier board details, schematics, DXF Files and more can be found at:

    $7380 (Avg Bid)
    $7380 平均报价
    23 个竞标

    Fasetto is a company making ultra-portable microcomputers with large storage and wifi. We currently use the IMX6 quad core MCU with Linux already ported into the hardware. We would like to build an abstraction layer to isolate the app team from the hardwarre as well as implement an efficient process controller to optimize the use of the 4 cores

    $7826 (Avg Bid)
    $7826 平均报价
    1 个竞标

    Looking for a embedded Linux developer/engineer for developing a driver for an iMX6 module on a custom board for capturing 16-bit greyscale video supplied by an FPGA through the camera sensor interface on the IPU of the microprocessor. Must have previous experience with IPU drivers and camera interfacing, as well as driver development for embedded Linux systems.

    $344 / hr (Avg Bid)
    $344 / hr 平均报价
    2 个竞标
    Project for Jin S. 已经结束 left

    Hello, as I can see, you have enough tasks related to c/c++, qt/qml, linux and embedded stuff. I have enough experience with such things and industrial protocols. And, after the latest demonstration of qt running on imx6, i think it's almost not a problem. I don't really know, how to use this website, but will be glad to hear your feedback and talk about tasks where I could be helpful. luntik2012@ p.s. don't look at this "budget"

    $235 (Avg Bid)
    $235 平均报价
    1 个竞标
    UI App Using QT 已经结束 left

    ...OS: yocto Linux. Hardware : imx6 based board 3. The app will use connman over dbus to access wifi facility like scan, connect etc. It should support all the standard Wifi facility. 4. The app should support multiple screen sizes. 5. Different widgets of the screen should be accessible using arrow keys (up, down, right , left). It means the focus should change when arrow key is pressed. The complete application should be controllable using arrow and "Enter" keys 6. The app should allow the user to enter password through on screen keyboard (to be controlled by arrow and enter keys) 7. The should have facility to forget any saved wifi device 8. There should be one exit button 9. Few more buttons to be defined later stage 10. It should be runnable on imx6...

    $1213 (Avg Bid)
    $1213 平均报价
    1 个竞标

    I have this capture card: That is installed in on an iMX6 board running Armbian: I need the Linux drivers installed so that the card is recognized. I can give SSH access to the board

    $250 (Avg Bid)
    $250 平均报价
    4 个竞标

    I have an existing PCB carrier board for a iMX6 for which I have the schematics and Altium design files: The freelancer will need to make 2 simple routing changes. Make a additional change which will require designing/adding a 3rd power rail to the board or modifying an existing 5V rail. Do a general design review. Generate new Altium Files, Gerbers, and schematics.

    $1252 (Avg Bid)
    $1252 平均报价
    34 个竞标

    Sabre lite imx6 loading uboot

    $5212 (Avg Bid)
    $5212 平均报价
    3 个竞标
    iMX6 Platform 已经结束 left

    Building an iMX6 platform with multi interface and connectors to drive multimedia and peripheral devices.

    $57 - $143
    $57 - $143
    0 个竞标

    one way video streaming (mjpeg) from embedded iMX6 platform funning yocto linux two way audio from android device to and from iMX6 embedded platform synced live with video UDP protocol on p2p network between iMX6 and android device Streamed video displaying on android device and audio playback, capture audio on android device, stream and playback on iMX6 device. iMX6 device runs MSCMMX6QZDK08AB quad core processor, 1MB RAM, SGTL5000XNAA3R2 audio codec ic, video capture from MiPi connected CCD with WiFi via PCIe... Must have experience with iMX6 platforms like those from boundarydevices BD-SL-I.MX6.

    $13883 (Avg Bid)
    $13883 平均报价
    8 个竞标

    We have a .Net C# based software that runs on Windows platform. We need it to be ported in .NetCF C# for (Compact Framework for Windows CE, WEC7 to be exact). The software actually uses RS232 port to program a microcontroller from a PC. We are trying to replace the PC and use our Windows CE terminal instead. It is expected that you have Windows CE simulator to test the port. As you don't have the hardware to test, I expect that you test run the software in your simulator and resolve all the compilation errors and I can test the port and give you feedback.

    $1471 (Avg Bid)
    $1471 平均报价
    3 个竞标

    Develop, Debug, Complete the ALSA Driver for Codec CS42888 of NXP on the Toradex Colibri iMX6 The ALSA Device driver is available on NXP Evaluation Board NXP Sabre AI and a kernel from NXP on github This Development needs enough experience on Audio ALSA Device driver on linux Embedded. this codec connect to the ESAI port of IMX6. Please send me offer only of you have enough experience and proportionality on this Subject.

    $2293 (Avg Bid)
    $2293 平均报价
    8 个竞标

    ...receive on iPhone/iPad, Open Received File in PDF Viewer on Apple iOs device (The sample size of PDF are - 1 MB, 10MB, 50 MB - Optimization of Transfer time and readings. should Achieve 4 MBaud as per the HW specification). Phases for work: Would need detailed design document (to be approved) and then code and testing Please clearly list your experience with similar embedded devices based on iMX6 or similar AND experience with SDP and iAP protocol...

    $149 / hr (Avg Bid)
    $149 / hr 平均报价
    25 个竞标
    Embedded Linux for SBC 已经结束 left

    We need create customized Linux for imx.6 quad Toradex board. I use the following hardware: Base Board: Core Board: Please read text: Tanks

    $16 (Avg Bid)
    $16 平均报价
    3 个竞标

    I need someone to build a bsp layer which is mainly about connectivity. An excellent reference is At the moment we are using the OpenRex board for development purposes and would like to have the ability to add the following mini pcie cards: - Telit LE910-SVG - Sierra Wireless MC7455 - ability to add future cards ea...cards: - Telit LE910-SVG - Sierra Wireless MC7455 - ability to add future cards easily I've only had a couple hours to look into this myself and have had issues reading the PCI cards to begin with. So I know we will need: - a kernel configuration recipe - card detection recipe - modem setup - pppd management The BSP we are using right now is: http://wiki.voipac.com/xwiki/bin/view/imx6+tinyrex/yocto

    $7208 (Avg Bid)
    $7208 平均报价
    3 个竞标
    Web development 已经结束 left

    Openwrt Gateworks imx6 mono-project package

    $2277 (Avg Bid)
    $2277 平均报价
    21 个竞标