Layout pcb electronic project jobs

筛选

我最近的搜索
筛选:
预算
键入
项技能
语言
    工作状态
    13,459 layout pcb electronic project 找到的工作,价格在 HKD

    CAM 350 相关版本工程专业 ***************************** panelized 专业小时 界面GPIO或 FPC链接布线 双面混六层 没有太多责任高求 快速完成~付款‘套餐’ 写个脚本 价钱另议

    $16 - $63 / hr
    加封
    $16 - $63 / hr
    4 竞标

    PCB,PCB assembly的公司设计logo

    $211 (Avg Bid)
    $211 平均报价
    12 竞标

    有4款PCB需要重新设计(修改),尺寸和厚度及工艺不变,现有线路图中有2个圆圈的意思是2个圈之间放反光杯,灯珠排列不能超出内圈范围

    $234 (Avg Bid)
    $234 平均报价
    6 竞标

    稳压电源的设计,体积小,需要发放在类似IPHONE5大小的区域里

    $3609 (Avg Bid)
    $3609 平均报价
    3 竞标

    Our original PDF created by WKHTMLTOPDF and we need to convert PDF/A-3u (xml attached) for local electronic invoice. Example: [login to view URL] [login to view URL]

    $156 / hr (Avg Bid)
    $156 / hr 平均报价
    8 竞标
    PCB design 6 days left
    已验证

    Need efficiently designed PCB, 6cm x 4cm for mini Wireless Ultrasonic Sensor Device with Visual & Audio Alerts. Confidentiality required. I can provide images of similar PCBs with some of the desired functions. Major components Two Ultrasonic Sensor / Transducer, Nordic Family chipset or equivalent, WiFi / Bluetooth, Light & LED Indicators

    $1844 (Avg Bid)
    $1844 平均报价
    14 竞标

    ...controllers and make a fully working PCB prototype). NOTE: Once you will successfully complete the project then you will courier the controller to me (I will pay for the shipment) and also share all the source codes and electrical designs, etc with me. Please answer all following questions: 1- Have you made a project for Synchronisation of DC motors

    $1586 (Avg Bid)
    $1586 平均报价
    3 竞标

    1. Firmware (450) 2. Improve schematics (moderate changes) (150) 3. Improve PCB (200) As agreed over email. I've also posted on the site for all freelancers.

    $6250 (Avg Bid)
    $6250 平均报价
    1 竞标

    ...Electronics Design PCB Design Layout Engineer Job requirements: • Graduated from Electronic Industry. • Understand the process from design to product board. • Experience the design of serial high speed circuit board. • Understand layout board processes such as stackup, power/ground planes, impedance control. • Understand the PCB and A...

    $297 / hr (Avg Bid)
    $297 / hr 平均报价
    5 竞标

    Design 3 products as I will provide the enclosure and the freelancer must provide the PCB complete design to fit within it and also firmware with a little webserver. The product is an I/O wireless based on LoraWan module, with external antenna communicating in Modbus. 1) It will have two relay outputs and two optoinputs, as well as a watchdog timer

    $10172 (Avg Bid)
    $10172 平均报价
    10 竞标

    DRV8313 circuit board. Need Gerber files and revised Schematic and board for manufacture.

    $1094 (Avg Bid)
    $1094 平均报价
    1 竞标

    ...Electronics Design PCB Design Layout Engineer Job requirements: • Graduated from Electronic Industry. • Understand the process from design to product board. • Experience the design of serial high speed circuit board. • Understand layout board processes such as stackup, power/ground planes, impedance control. • Understand the PCB and A...

    $94 / hr (Avg Bid)
    $94 / hr 平均报价
    34 竞标

    I'm building a servo motor and have everythin...have everything done but the circuitry. The circuitry includes 3 3-phase Brushless DC drivers. I've downloaded Eagle from Autodesk and have finished the schematic and board layout. Also generated Gerber files. I just need someone to review my work so I can send the files to a company to be manufactured.

    $875 (Avg Bid)
    $875 平均报价
    6 竞标
    Mechanical design project 5 days left
    已验证

    I am working on a smart home product and I need mechanical design work done for it. I have a PCB with bunch of components with mounting holes on them. I also have the unibody design completed. You will work with the existing files and do the mechanical design work for it.

    $900 (Avg Bid)
    $900 平均报价
    54 竞标

    I am looking to have image files of 1 PCBs converted to PCB layout files (and then Gerber files) to permit manufacture. PCBs are big in size - A4 size. Two layers with some through hole. Complete set of Gerber files required including PCB folder, Fab folder, Assy folder and all its contain the workable file. A set of artwork, drilling drawing and

    $1042 (Avg Bid)
    $1042 平均报价
    16 竞标

    Hello. I have written a arduino code but it needs tweaking. Not a lot of work to be done but it would help getting someone experienced. I also have designed a minamilistic PCB that needs tweaking, I made a one sided board in fritzing as I do not know how to use eagle or other design softwares. I can give you a basic idea of what needs to be done.

    $667 (Avg Bid)
    $667 平均报价
    27 竞标

    Need a pcba design; 2x canbus (tja10xx??) GPS module (offer price/performance product) GSM module (offer price/performance product) MCU (s32k or stm32 series) input power supply is 12V (6-36V is good) Offer good prices and show your references

    $7266 (Avg Bid)
    $7266 平均报价
    26 竞标

    [login to view URL] I need hundreds of sound relay delay circui...needs to be changed then you will revise file to reflect that for no extra fee. If we require another change after that we will pay $25 per revision. If you can get this project done for less than $200 that would be great as well.

    $1266 (Avg Bid)
    $1266 平均报价
    24 竞标

    Hello, we need to design a small pcb with a lipo bat charged using wireless power transfer. We need also to place a couple of buttons and a low consumption MCU. We need a couple of prototypes working. Simulations with SPICE will be a plus. If you think you can design this PCB really fast start your bidding with the word WPTICAN. All biddings which do

    $18031 (Avg Bid)
    $18031 平均报价
    32 竞标

    ...product design for one of our patented products. This project is in concept phase and the freelancer should be able to do following: - Concept sketching - Graphic design - Product design in accordance with industry standards - 3D modelling - 3D rendering - Electronic packaging - Working closely with PCB manufacturer - Prototype support - Preparing tooling

    $243956 (Avg Bid)
    $243956 平均报价
    35 竞标

    I need talented fresh graduate in field of electronic in Kuala Lumpur. Required Skills : PCB Designing Cuircut Designing MCU Programming ARM

    $3914 (Avg Bid)
    $3914 平均报价
    25 竞标
    $948 平均报价
    12 竞标
    Fix PCB Design 3 days left

    We're using a PCB connected to an adafruit bluetooth feather board to power LEDs and to charge an iPad. We have a few designs that aren't working well, and are in need of someone to produce an improved design that fits our requirements. The board just needs to power LED lights, charge an iPad, and connect to a bluetooth component with firmware.

    $3797 (Avg Bid)
    $3797 平均报价
    25 竞标

    Need help with a project of an electronic circuit

    $680 (Avg Bid)
    $680 平均报价
    27 竞标
    Voting Electronic 3 days left
    已验证

    I need a web, html5 oriented electronic voting system to support Government API integration to verify identity, encription for votting, online counting with some real time graphs and usual voting related mechanisms such as opening the polls, time lapse defined, accepted universe of voters, etc.

    $1297 (Avg Bid)
    $1297 平均报价
    8 竞标

    Hi, We are looking for skilled Industrial designer who can create modern and clasdic product design for our prototypes.

    $3242 (Avg Bid)
    $3242 平均报价
    57 竞标

    Gerber Design: Dimension of PCB : 140 mm X 100 mm Major components : Microchip control PIC18F family Display : 3.5" TFT display MICROCHIP LAN : ENC23j60 SPI FLASH Memory USB FTDI series Maxim series of ADC

    $28 / hr (Avg Bid)
    $28 / hr 平均报价
    28 竞标

    I need a power strip that is similar to many other products in terms of function (just google wifi power strip etc). I will even send ...google wifi power strip etc). I will even send you one to deconstruct to get a better idea. I need the design of the strip as well as the wiring and pcb to control it. I will create a separate project for the coding.

    $18344 (Avg Bid)
    $18344 平均报价
    39 竞标

    Please do chat me and I explain everything

    $78 / hr (Avg Bid)
    $78 / hr 平均报价
    34 竞标

    We have a power electronics circuit ready. The task will be to design the PCB layout which we will send for fabrication and the electronic component soldering will be done by us. The prototype should run after fabrication for the project to be considered successfully completed.

    $844 (Avg Bid)
    保密协议
    $844 平均报价
    24 竞标

    Project Blue Board • Controller board for a hand held fan and light source. • All required information should be provided below, otherwise propose or ask • Critical component locations are indicated Basic control board with following main components: • Battery 3,7V HHS 106070 -5000mAh • Voltage step up from 3,7V to 12V and 24 V Respectively

    $9375 (Avg Bid)
    $9375 平均报价
    11 竞标

    Learn PCB design using eagle can u teach me

    $1102 (Avg Bid)
    $1102 平均报价
    21 竞标

    I have several schematics of guitar pedals in pdf that I would like to pass to eagle or other pcb design software

    $1063 (Avg Bid)
    $1063 平均报价
    9 竞标

    Hey there, I'm developing a small voltage detecting device similar to ...advise on suitable batteries * Create a working prototype Please begin your proposal with the word Robot so I know you're not a robot : ) The number one objective of this project is to create the worlds smallest voltage detecting device. More details to follow... Thanks, Ben

    $195 / hr (Avg Bid)
    $195 / hr 平均报价
    9 竞标
    Electronic design 2 days left
    已验证

    We require the services of an electronics engineer to design circuit board,electronics and system to use on our new range of furniture

    $3688 (Avg Bid)
    $3688 平均报价
    44 竞标

    The main idea is to make a similar product like the vaadu captor and adding a lot of enhancement : [login to view URL] what we need to improve regarding the vaadu captor are : - wifi(dual channel) / bluetooth.

    $6834 (Avg Bid)
    $6834 平均报价
    17 竞标

    Hi Junaid A., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Kicad PCB amendments required. resizing of it to make Raspberry PI accommodated on PCB. Let me know a best time to chat on it in detail.

    $391 (Avg Bid)
    $391 平均报价
    1 竞标

    ...and when we got married we buy a house in Taiwan, now I have a legal process, and i need to prove that we have a house in taiwan, i have been searchin and i see that a : electronic cadastre cartificate or a land ownership certificate will work for my legal process in Ecuador . so i need urgently this certificate, or other certificate maybe you know

    $898 (Avg Bid)
    $898 平均报价
    2 竞标

    Looking for a hardware developer for a small device. The development will include: Schematics and Bom PCB design and Gerber files 5 complete working samples to be sent to chile. manufacture number, link on Digi-key or mouser and description for all components. The Maximum hardware size is 2cmx2cmx1cm and include a speaker, battery (70-100mah), Bluetooth

    $5594 (Avg Bid)
    $5594 平均报价
    3 竞标

    I want the schematic and also the corresponding pcb of this circuit design with all the needed (Gerber) files.( You must only use the free version of KiCad software, use of another software design package is not acceptable ! ). I will provide you with a design from scratch ( by hand - pdf file ). I believe it will be an easy job for someone who knows

    $555 (Avg Bid)
    $555 平均报价
    4 竞标

    I need a professional who could design a LED PCB (as per given specifications), print it and mount the LED as well. Specifications as below: 1. PCB size is 5 x 5 inch 2. Pieces - 5 (Initial) 3. Single side aluminium PCB - SMD LEDs placed in 3 rows (9 x3 = 27) More details will be provided after the initial offer. A Non-disclosure agreement will

    $1015 (Avg Bid)
    $1015 平均报价
    24 竞标

    I have a requirement of designing and developing Home Automation products. Devices Needed: 1. A ZigBee device...be selected such that pricing is reasonable without compromising the quality. 2. Do not use readily available boards like Arduiono or Rasberry Pi. A new PCB should be designed as per the project need. Detailed requirements are attached.

    $8064 (Avg Bid)
    $8064 平均报价
    22 竞标
    Programming ATmega1280 TQFP on Pcb 22 hours left
    已验证

    I need to program a Pcb that’s uses a Atmega1280v TQFP that needs a Bootloader and program the source code , and test.

    $2609 (Avg Bid)
    $2609 平均报价
    16 竞标

    Hi Karthikeyan can you design a pcb for a LED strobe and it should me switch on/off using pwm signals

    $234 (Avg Bid)
    $234 平均报价
    1 竞标

    I need a gps tracker + live web tracking platform login for various user The web tracking map have to show GPS satellites and CELL triangulation and WIFI pcb design + code ( pcb is design is done and 90% of code is done ) The tracker send GPS-CELL-WIFI data via HTTP/Gprs connection to a server/web page And from web interface must have 2 button to

    $1367 (Avg Bid)
    $1367
    1 作品
    $4641 平均报价
    12 竞标

    Hello everyone, I would love your help to develop a simple rounded PCB board that could fit a Nodemcu board with 6 buttons and a tp4056. Please check the Fritzing file attached before messaging me

    $1336 (Avg Bid)
    $1336 平均报价
    18 竞标
    VENDING TELEMETRY 3 hours left
    已验证

    ...the device 2. The numerical keyboard 3. The coin mechanism 4. Card Reader [login to view URL] receiver/collector 6. Termoprinter /option/ The project requires: - To design the hardware /scheme and PCB/ of the controller with the assistance and guidance from the assignor - To write a firmware, which will execute the assigned tasks- this will

    $46729 (Avg Bid)
    $46729 平均报价
    22 竞标

    Hello, I’m looking for someone with experience working with ESP32 and also designing PCB for production. I have a development board with a schematic that needs updates to fit our current requirements. Some of the work are as follow: 1. Remove some of the parts from the development board that are unnecessary, and not applicable to our current function

    $320 / hr (Avg Bid)
    $320 / hr 平均报价
    59 竞标

    My whole main project is to create a phone app which is able to open/close a real window with a real window actuator connected to it and the phone app will be able to also read the readings from my DHT11 sensor (saying: humdity:95%, temperature:@27oC) and PIR sensor (saying: there is an obstruction). The hardware part will be using of DHT11 sensor (a

    $484 (Avg Bid)
    $484 平均报价
    8 竞标