Orcad file format工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    423 orcad file format 搜到的工作,价格货币为 HKD

    ...Schematic and PCB of an audio board. Need to Update/add connectors such as MIDI connectors, audio connectors, USB, memory, board size, etc The PCB is in CADstar format, The Schematic is in Orcad format. I have schematics and PCB files, I you have CADstar is a Plus. Our Organization shall keep the rights to the work. NDA and Contract is required.

    $4641 (Avg Bid)
    $4641 平均报价
    27 个竞标

    We have a circuit design and layout for an audio mixer controlled via Bluetooth. We need an electronics cir...Bluetooth. We need an electronics circuit design engineer to take over the project and finish integrating some peripherals and fix some cross-talk issues. Design and Layout is in ORCAD. Location is Glasgow. Some firmware skills preferred too.

    $242 / hr (Avg Bid)
    本地
    $242 / hr 平均报价
    3 个竞标
    Design schematic on Orcad 已经结束 left

    Orcad expert needed we need to design schematic on orcad. also do coding . we need expert engineer

    $188 (Avg Bid)
    $188 平均报价
    6 个竞标

    ...output voltage. - The AVR system should also be able to perform the following tasks: surge suppression, short circuit protection and harmonic filtering. - Design circuit in (ORCAD/PSPICE SCHEMATICS) and (MATLAB/SIMULINK) - Designs of the AVR system should be analyzed and justified in terms of performance, complexity and cost. - I wan also detailed

    $2430 (Avg Bid)
    $2430 平均报价
    14 个竞标

    ...output voltage. - The AVR system should also be able to perform the following tasks: surge suppression, short circuit protection and harmonic filtering. - Circuit in both (ORCAD/PSPICE SCHEMATICS) and (MATLAB/SIMULINK) - Designs should be analyzed and justified in terms of performance, complexity and cost. - Understandable full explanation details

    $1820 (Avg Bid)
    $1820 平均报价
    3 个竞标

    i have schematic file designed on Orcad. i need to re design some part on kicad. this is ongoing project if you finish this job succesfully.

    $2024 (Avg Bid)
    $2024 平均报价
    8 个竞标
    Kicad Design expert 已经结束 left

    i will share via interview . i have schematic file designed on orcad.

    $219 (Avg Bid)
    $219 平均报价
    10 个竞标
    PCB developer required 已经结束 left

    Need to develop simple small 2 layers PCB (size 85...PDF The task is to develop PCB for this small project and create all required GERBER files which will allow ordering PCB. I prefer to see the project which will be done in Orcad. Output must be schema/project/Gerber files. In case of good completion of the task, I can offer other bigger projects.

    $258 (Avg Bid)
    $258 平均报价
    41 个竞标
    Project for Thanh Tung N. 已经结束 left

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $122 / hr (Avg Bid)
    $122 / hr 平均报价
    1 个竞标

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $117 / hr (Avg Bid)
    $117 / hr 平均报价
    1 个竞标
    Project for Viktor S. 已经结束 left

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $117 / hr (Avg Bid)
    $117 / hr 平均报价
    1 个竞标
    Project for Hashem A. 已经结束 left

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $109 / hr (Avg Bid)
    $109 / hr 平均报价
    1 个竞标

    I have 2 binary files that can be opened with Orcad Allegro, one is a .PCB and the other is a .DSN file. I want to be able to export them with a cheap/free EDA tool. Orcad Allegro is needed to import them.

    $55 / hr (Avg Bid)
    $55 / hr 平均报价
    2 个竞标

    I have 2 binary files that can be opened with Orcad Allegro, one is a .PCB and the other is a .DSN file. I want to be able to export them with a cheap/free EDA tool. Orcad Allegro is needed to import them.

    $164 / hr (Avg Bid)
    $164 / hr 平均报价
    7 个竞标
    PCB board bug 已经结束 left

    We PCBA for board has some bug: Your job will be : - Review my schematic and make sure it will meet final necessary functionality of our product - Review our design orCad file, Gerber and BOM and make sure they are meet the schematic needs - Debug the board and work with the PCBA manufacturer to fix the issue. - Do the software test of produced

    $4110 (Avg Bid)
    $4110 平均报价
    46 个竞标

    I require to convert Altium Schematic and PcbLib to Orcad Capture. And it should be neat and error free after conversion. On acceptance I will enclose the design files in Altium.

    $163 (Avg Bid)
    $163 平均报价
    6 个竞标

    We are located in Sunnyvale, CA. Looking for a PCB designer to layout a mini-backplane using Allegro. This is a respin of an existing design. The schematic is captured by OrCad, and Allegro netlist is generated. It is 18 layers and total around 450 nets to route, the majority are differential signals there are 9 power planes and 9 signal layers.

    $258 / hr (Avg Bid)
    $258 / hr 平均报价
    19 个竞标
    PCB CAD LAYout 已经结束 left

    I need to get the layout done for my PCB. Schematics has already been drawn for the same in OrCAD.

    $672 (Avg Bid)
    $672 平均报价
    37 个竞标
    PCB Gerber File 已经结束 left

    -Design an Orcad PCB for a 4 layer PR4 board with appro dimension as 2.5"x7", including generation of gerber and manufacturing documentation. -Convert allegro formatted netlist schematic to an Orcad PCB format netlist schematic -Provide 4 hours of online training and knowledge transfer to our inhouse engineers -Provide a short video for training

    $4375 (Avg Bid)
    $4375 平均报价
    26 个竞标
    Project for Okamoto T. 已经结束 left

    Hi Okamoto T, I saw your profile and reviews, and I would like to discuss a project with you. I have a PCB made with Orcad 16.4. It includes an ESP32, Memory, USB input, some outputs and a Wifi Antenna. I need to make the next changes: Change the shape and size of the PCB Replace all Digital pins for 4 connectors, each connector has 2 power

    $1563 (Avg Bid)
    $1563 平均报价
    1 个竞标

    Hi. i need help with my university project. i don't want someone to do it for me but to guide and help. i need to build a stereo microphone ...it for me but to guide and help. i need to build a stereo microphone transmitter and a receiver circuit that work on very high frequencies without delay. also need to show Orcad simulations and do a PCB design.

    $94 / hr (Avg Bid)
    $94 / hr 平均报价
    7 个竞标
    Project for Teodor L. 已经结束 left

    Hi Teodor L., I noticed your profile and would like to offer you my project. We need to convert two projects (board 200mmx200mm) from Orcad to Kicad. can you make me an estimation of time/cost?

    $4688 (Avg Bid)
    $4688 平均报价
    1 个竞标
    Project for Anna G. 已经结束 left

    Hi griganna,I noticed your profile and would like to offer you my project. We need to convert to projects from Orcad to Kicad. can you make me an estimation of time/cost?

    $1953 (Avg Bid)
    $1953 平均报价
    1 个竞标

    ...have an old OrCAD project PCB design and need to generate files for manufacturing. I already have gerber files but need a 'pick and place' (centroid) file too for PCB assembly. Finally, if possible, I would also need to convert this project into Altium Designer format for future updates. What I have? - Original CAD design files (old OrCAD). - Updated

    $156 / hr (Avg Bid)
    $156 / hr 平均报价
    8 个竞标

    I need a high speed schematic and layout. It could be done in altium or orcad, I will provide some reference PDF documents. It needs impedance control and SI simulation.

    $94 / hr (Avg Bid)
    $94 / hr 平均报价
    37 个竞标

    I need a high speed schematic and layout. It could be done in altium or orcad, but I will provide some reference PDF documents. The board involves DDR and a processor. It needs impedance control and SI simulation.

    $4188 (Avg Bid)
    $4188 平均报价
    36 个竞标

    ...- gute Kenntnisse in der Digital- / Analotechnik - Kenntnisse von Simulations- und Prüfumgebungen - Kenntnisse mit technischer Dokumentation/Nachweisführung. Technisch: - OrCAD, PSpice, FPGA/VHDL, C++ - DO-254, MIL-STD-1553...

    $45229 (Avg Bid)
    $45229 平均报价
    3 个竞标

    do some reverse engineering , trace a single sided board , draw schematic in capture , then redesign the board to double sided in orcad layout

    $1883 (Avg Bid)
    $1883 平均报价
    2 个竞标
    PCB DESIGN 已经结束 left

    Draw us a schematic in orcad capture of an existing PCB by tracing it and then Design us a double sided PCB in orcad layout

    $1164 (Avg Bid)
    $1164 平均报价
    28 个竞标

    Sa se proiecteze si sa se simuleze microprocesorul AM2901 cu aplicatia Cadence OrCAD. Proiectul va trebui sa contina si o documentatie pe langa fisierul de OrCAD. Ceea ce se doreste a fi implementat se gaseste in fisierul atasat.

    $117 - $195 / hr
    $117 - $195 / hr
    0 个竞标
    Project for Oleksandr P. 已经结束 left

    Здравствуйте, Oleksandr P.! Я обратил внимание на ваш профиль и хотел бы предложить вам свой проект (в OrCAD). Мы можем обсудить детали в чате.

    $625 (Avg Bid)
    $625 平均报价
    1 个竞标
    Project for Alexandr K. 已经结束 left

    Здравствуйте, Alexandr K.! Я обратил внимание на ваш профиль и хотел бы предложить вам свой проект (на OrCAD). Мы можем обсудить детали в чате.

    $469 (Avg Bid)
    $469 平均报价
    1 个竞标

    can you convert pcb Allegro 9 to 17.2 as well Orcad files i need quick response. budget is small but on going project

    $531 (Avg Bid)
    $531 平均报价
    9 个竞标

    ...USB1_TX0P B20 To Tester Channel Loop back USB1_TX0P via 0.1uf - series L with TC USB1_TX0M A20 To Tester Channel Loop back USB1_TX0M via 0.1uf - series L with TC Design: OrCAD & Allegro. Please review the inputs and provide Quote. Thanks Dinesh KS +919844615310 Design Mangaer Synergy circuits pvt ltd India...

    $127 / hr (Avg Bid)
    $127 / hr 平均报价
    2 个竞标

    ...schematic of a PCB reviewed and re-engineered for manufacturability. The inputs will be CAD Cadence Orcad files and layouts. The board is designed to hold a power supply and WiFi antenna. The result should follow these requirements: 1. Be in Allegro format. 2. Maintain the original functionality of the inputs. 3. Be manufacturable by a quick turn prototype

    $4063 (Avg Bid)
    $4063 平均报价
    16 个竞标

    I have a PCB designed in OrCad Layout and need to convert it to Allegro and reviewed to make sure there are no conversion errors.

    $1524 (Avg Bid)
    $1524 平均报价
    9 个竞标
    orcad expert needed asap 已经结束 left

    expert in orcad needed to modify a pcb

    $172 (Avg Bid)
    $172 平均报价
    11 个竞标

    I have my previous orcad design files. I want to update new version. Please read attached document. Add some component and connectors. Thanks

    $313 (Avg Bid)
    $313 平均报价
    8 个竞标
    Schematic entry 已经结束 left

    I have a paper copy of schematic and placement, I need manually entered — preferably into orcad but not required (since that what they were originally done with). The circuit has 2 PICs and 2 PLDs, some basic ic’s and memory.

    $531 (Avg Bid)
    $531 平均报价
    30 个竞标

    convert Orcad schematic and PADS layout to Kicad. we want libraries and related Kicad setup so the translated project can be easily revised and used to make a new PCB layout.

    $1320 (Avg Bid)
    $1320 平均报价
    13 个竞标
    convert pcb Allegro 9 to 17.2 --2 已经结束 left
    已验证

    can you convert pcb Allegro 9 to 17.2 as well Orcad files i need quick response. budget is small but on going project

    $1156 (Avg Bid)
    $1156 平均报价
    11 个竞标

    Hi, I need to make a PCB of my schematics in Orcad with the layout and size shown in the attachment. Please provide a quote.

    $4774 (Avg Bid)
    $4774 平均报价
    30 个竞标

    can you convert pcb Allegro 9 to 17.2 as well Orcad files i need quick response. budget is small but on going project

    $219 (Avg Bid)
    $219 平均报价
    5 个竞标

    can you convert pcb Allegro 9 to 17.2 as well Orcad files i need quick response. budget is small but on going project

    $195 (Avg Bid)
    $195 平均报价
    3 个竞标
    PCB Designer 已经结束 left

    Experience and understanding in ATE Test Boards and Substrate designs. Good knowledge in Schematic entry (OrCAD and Concept HDL) Good Knowledge in CAD Tool (Cadence Allegro experience and any other tools). Solid understanding of Schematic interpretation and Schematic Vs Layout cross checks. share your profile [Removed by Freelancer.com Admin]

    $13927 (Avg Bid)
    $13927 平均报价
    5 个竞标
    Pcb Designing 已经结束 left

    Need to design 2 layer Pcb for SMD & through hole component using Orcad only. small size to big — Starting project cost ₹1500 to ₹4000.

    $199 (Avg Bid)
    $199 平均报价
    21 个竞标

    I'm looking for a Orcad, Allegro experienced PCB design guru in New Delhi/NCR. Must have experience on Multilayer Design, High Speed Design, Impedance matching, controlling impedance, transmission lines, differential pair, Analog and mixed mode design , EMI/EMC, SI/PI . Expert in settings constraints.

    $1019 (Avg Bid)
    $1019 平均报价
    2 个竞标

    注册或者登录后来查看详情。

    加精 加封 保密协议

    We have a schematic in Capture and its PCB design in LayoutPlus (using Orcad 10.3 & 15.7). The schematic has been updated and the PCB design has to be changed to reflect the change in the schematic. Footprints and pad sizes have to be updated on the PCB. PCB design itself needs to be optimized. The schematic consists of a 20 pin IC and two 8 pin

    $1133 (Avg Bid)
    $1133 平均报价
    7 个竞标

    i want to learn orCAD pcb designing completely... need a guru from Chennai

    $2328 (Avg Bid)
    $2328 平均报价
    4 个竞标