Plastic mold design工作

筛选

我最近的搜索
筛选:
预算
键入
项技能
语言
    工作状态
    8,339 plastic mold design 找到的工作,价格在 HKD

    This project is to develop the prototype 3d model of a transformer-like plastic robot toy product. We have done the concept design and need experienced designer to help on completing the final assembling 3d model for prototype production (using 3d printing). The final 3d model needs to be ready for real production use. 诚邀有玩具工程设计相关经验的设计师参与完成一部变形

    $3702 (Avg Bid)
    $3702 平均报价
    11 竞标

    We are looking to develop Ultrasonic tube sealing system with the following requirements: 1) Seal Lami Plastic tubes of 55mm diameter 2) Auto adjust the sealing power to match any tube thickness 3) Would be ideal if its above 20Khz PLEASE NOTE: We need the Power Generator, Transducer/Booster, Horn & Sealing head. We will need a working prototype

    $11255 (Avg Bid)
    $11255 平均报价
    2 竞标

    Looking for a mechanical engineer to render production-ready files for a 3d hinged plastic case to specific specs and design, by upgrading an existing product (shown) to one that is superior in design and functionality. Full concept ready. Medium-advanced engineering problem-solving required for dual-use hinge connection points. Mild artistic 3d modeling

    $1133 (Avg Bid)
    $1133 平均报价
    42 竞标

    A need to find a designer, who can assist me to make a second level design of the attached tie-off point. The subject of the work is to design the cover box, and dimension the anchor spring. A cover box could be a composite mold product, and the spring is made out of stainless steel; code: 1.4404.

    $2577 (Avg Bid)
    $2577 平均报价
    38 竞标

    I need to design a package of 500gms and 1kg plastic cover for spices packing

    $600 (Avg Bid)
    $600 平均报价
    19 竞标

    I need a logo designed. Name Started from K latter of plastic Industries.

    $117 (Avg Bid)
    $117 平均报价
    36 竞标

    We are looking to develop Ultrasonic tube sealing system with the following requirements: 1) Seal Lami Plastic tubes of 55mm diameter 2) Auto adjust the sealing power to match any tube thickness 3) Would be ideal if its above 20Khz PLEASE NOTE: We need the Power Generator, Transducer/Booster, Horn & Sealing head. We will need a working prototype

    $16239 (Avg Bid)
    $16239 平均报价
    7 竞标

    I'm looking for industrializzation/ manifacturer who estimates the production costs of an object made of a plastic case, a cap, an electronic part. It mean a series production costs, mold costs,

    $187 (Avg Bid)
    $187 平均报价
    7 竞标

    Need a copywriter to plan 5x a week concepts and copywriting for my clients social media platforms. Industry: Beauty | Plastic surgery **Need the entire month of October planned out (I will provide 5 categories) **I will provide all photography and stock photos and collaborative calendar platform.

    $2226 (Avg Bid)
    $2226 平均报价
    24 竞标

    Hi, I'm looking for a designer that works and understand plastic molds. We already have a design, but the factory can't use it to create a mold because it has triangles. What we need is a good designer, that will change the design to arc lines instead of triangle shapes. The format of the design should be in STP or IGS format. We have source file format...

    $258 (Avg Bid)
    $258 平均报价
    22 竞标

    we need a small box enclosure 6cm x 6cm x 1cm to house a small trasmitter module, we have an existing box enclosure which design can be based on

    $2921 (Avg Bid)
    $2921 平均报价
    50 竞标

    Inviting creatives and visionaries from all around the world to join in and fight plastic pollution through raw creativity, imagination and talent. How would you reduce plastic pollution in your community and beyond? Ultimately looking for design forward strategy and solutions. Is it a structure, a series of structures, a product, a vehicle, an idea

    $391 (Avg Bid)
    $391
    2 作品

    I have a background image design i just need my logo which is also designed put over the top if it as this is simple task i will not be paying more than £10 and need it done tonight

    $174 (Avg Bid)
    $174 平均报价
    5 竞标

    to create the design for injection mold according our part 3d model

    $3467 (Avg Bid)
    $3467 平均报价
    53 竞标

    to create the design for injection mold according our part 3d model

    $3377 (Avg Bid)
    $3377 平均报价
    25 竞标

    ...images. The main change I want to make is to have a wide range of different colours and materials on the outside of the plastic capsule that holds the winding mechanism and put my company logo on it. I also want to change the design of the actual removable watch holder which holds the actual watch. There are 4 different styles, each in 5 different colours

    $1789 (Avg Bid)
    $1789 平均报价
    49 竞标

    Need to get autocad design of plastic articles

    $136 (Avg Bid)
    $136 平均报价
    57 竞标

    ...CEO of my own fashion brand and currently am in the process of launching a new product. My manufacturer just told me that the logo I sent over wasn't good enough to make the mold for the logo in order to get the logo on the product. I have a PDF version of my logo exactly how I want it but I am looking for someone who is able to convert the logo into

    $500 (Avg Bid)
    $500 平均报价
    43 竞标

    We have multiple lasers that cut out acrylic sheet. Everything is drawn on AI and imported into the laserworks. Our AI drawer gets backed up sometimes and I need help with additional drawings. I can email a hand done drawing with specs, and then I need it drawn in AI in 2 dimensions to easily be converted for laser cutting. (Sometimes engraving also). If anyone is comfortable or experienced with w...

    $836 (Avg Bid)
    $836 平均报价
    32 竞标

    ...in which is captive strapped to a gurney, pushed by another escaped captive (female), flee from a killer with a demolition saw, through an abandoned old cinema, filled with plastic hallways and a forest of live bodies on hooks. (Reference photos attached) THE CHURCH - Horror An electrician receives a call to visit a seemingly abandoned rural church

    $1039 (Avg Bid)
    加精 担保 保密协议
    $1039
    19 作品
    Trophy icon Design a product case and box 已经结束 left

    ...box design for my product. The product is a collapsible drinking straw. Layout for the box is attached. I do not want any of the images that are shown on the current layout. The box will be brown kraft paper. Text for the box: Collapsible Stainless Steel Straw This box contains: 1 stainless steel straw 1 case made from recycled plastic 1 cleaning

    $86 (Avg Bid)
    $86
    2 作品

    Required Packaging Artwork Design description as follows; 1) Plastic pouch 210mm X 210mm 2) Food product (Sago Balls) 3) Front and back 4) 4-6 colours max 5) Pentone colours preferred 6) Product will be displayed in Chillers 7) Product target group is Asian, Ice Blends maker, Takeaway Beverage stalls & Dessert makers. 8) Small Transparent window in

    $570 (Avg Bid)
    $570 平均报价
    59 竞标
    Trophy icon Develop a Logo 已经结束 left

    ...will advocate to reduce, if not end the use of plastic. The business is already registered and domain has been purchased. We just need to develop the logo I have in mind, which I drew on a piece of paper. I have zero talent in drawing so please bear with it. The name of the business is Need to End Plastic Movement or NEP Movement. Our goal is to create

    $117 (Avg Bid)
    担保
    $117
    17 作品

    ...Celley Produt name: Silicone Spatula Set Includes barcode Includes text "Made in China" Includes suffocation warning: "Warning: To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy." Minimum font size for the warning text is 10 point.

    $156 (Avg Bid)
    $156 平均报价
    1 竞标

    ...with no foreign accent. Part of the interview process will involve a phone call where we can verify this. You will be provided with a rough outline of a script that you can mold as you talk to agents. Apply and tell me why you would be a good fit for this specific position. DON'T SEND ME A GENERIC COVER LETTER. Please, no ridiculous hourly bids. This

    $86 / hr (Avg Bid)
    $86 / hr 平均报价
    9 竞标

    I want to show a full cage of empty plastic bottled water bottles + then a water filter system device = an almost empty cage of empty plastic bottled water containers $ saved by not buying plastic bottled water bottles and less plastic waste. I sell a home water filter system that fits under the kitchen sink or above it and it will pay for itself

    $1632 (Avg Bid)
    $1632 平均报价
    27 竞标

    Hello I need a logo for our company. We are into business of manufacturing plastic mats. So I would like you to make a logo related to colours, patterns, etc. And the name of our company is "Colorise Mats".

    $172 (Avg Bid)
    $172 平均报价
    47 竞标

    Need to conduct a FEA and run simulation as per requirements of AS1546. Sample report attached.

    $2617 (Avg Bid)
    $2617 平均报价
    40 竞标
    Plane pillow 已经结束 left

    Hi i need a cad 3D drawing for a new product I would like to produce and the factory needs a 3d drawing to make new mold for my product. The product I would like to make is a specific type of plane pillow similar to the picture attached but with a few differences. I can send you more exact free style drawings once I receive a quote that I agree on.

    $469 (Avg Bid)
    $469 平均报价
    33 竞标
    3D Printing - CAD Design 已经结束 left

    Looking for a local professional (Metro Detroit) with 3D printing experience to create a mold for a unique type of plastic bag.

    $3546 (Avg Bid)
    $3546 平均报价
    32 竞标
    Business Card 已经结束 left

    To create a creative way of having a mobile app business card using google play and apple store icon to showcase that our company is a mobile booking pla...way of having a mobile app business card using google play and apple store icon to showcase that our company is a mobile booking platform for the aesthetic , cosmetic and plastic surgery industry

    $367 (Avg Bid)
    $367 平均报价
    66 竞标

    I need an existing website rebuilt. I need you to design and build a landing page. I will give details of website and the Similar website refer on that basis combination without copying data Need right Content for Promotion of the website

    $547 (Avg Bid)
    $547 平均报价
    4 竞标

    Hi, I have a 3D model which I like to create silicone mold. 3D model is complex so I cannot do 2 part molding technique. So, need someone to reverse the model and split it into multiple parts for making permanent silicon mold. ** Obviously all 3D parts must be easy enough to remove from the cast. Let me know if you understand what I am saying. Thank

    $1359 (Avg Bid)
    $1359 平均报价
    81 竞标
    WEBSITE PHOTOS 已经结束 left

    I NEED A LOCAL PHOTGRAPHER TO VISIT MY WAREHOUSE AND TAKE PHOTOS OF SMALL COLOURFUL PLASTIC TO BE EDITIED FOR ME TO PUT ON MY WEBSITE, INITIALLY AROUND 100 PHOTOS, COULD LEAD ONTO MORE

    $1022 - $2554
    本地
    $1022 - $2554
    0 竞标

    ...patents and your upcoming design must not infringe on someone elses patent Then come up with design to suit typical size of pipes used in the australian and must also be able to contact companies and suppliers that provide intumescent material to suit the design. It is not a hard project to deal with but you must have designed plastic products and know the

    $2523 (Avg Bid)
    $2523 平均报价
    29 竞标

    Thinking similar sort of style to the "Chipotle - Back to the Start" animation (please give this a watch first). Won't have to be very detailed figures, but ...have to be very detailed figures, but identifiable as what they are supposed to be. This will include a few 3D animations of people, aquatic life such as sea turtles etc, plastic bottles etc.

    $13083 (Avg Bid)
    $13083 平均报价
    51 竞标
    Design me a brochure 已经结束 left

    I want to get a brochure designed for an exhibition I am participating. We export eco friendly products. Our products are an alternative to plastic pollution. The brochure should be on the same line. We need about 8-9 products in the brochure with a brief texts. Please note that I am not looking for a bifold or a trifold traditional thing. Our products

    $187 (Avg Bid)
    $187 平均报价
    25 竞标

    ... we are building 'stemless wine-glasses', only of the non-breakable/hard plastic variety. At the moment, most stemless wine glasses look the same as each other, they're clear glass/plastic, curvy, cup-shaped, there's no difference between them. So, who can think of a design that mum will want to show off to her guests when she has them over for dinner

    $2203 (Avg Bid)
    $2203 平均报价
    12 竞标

    I need a mold designed for the part attached. The mold needs to be designed for easy machining of the mold and part form. All designs must be done in Solidworks. Part is plastic. All I have is the step file no prints. Please bid your best price & lead-time.

    $180 (Avg Bid)
    $180 平均报价
    14 竞标

    Project is a micro plastic injection machine that works off a Nextion display that allows the user to interact with the project. 2x stepper motors needs to be controlled and to be set when at max distance. Heater bands needs to be able to be set in settings to desired temp. project needs to be automated after all settings have been filled in. Push

    $4600 (Avg Bid)
    $4600 平均报价
    26 竞标

    I'm looking for a packaging/storage solution/design/idea. This packaging/storage solution must be child-proof, which means it is difficult for a 5-year old child to open. The package could be made of metal, glass, silicone or plastic. It could be a box in the shape of rectangle or square, and could be a jar with lid, or in any shape you think it

    $961 (Avg Bid)
    $961 平均报价
    27 竞标

    ..."Pivot to Pivot" to "Aligner Installation". Door to Door aligners - Are used in 4 panel or larger openings between the two panels with the rollers at top. Attach pairs of plastic door aligners approximately 2” and 36” from bottom of door, similar to picture, using supplied #8 screws(two per aligner). Pivot aligners - Are only used on 6 or 8 panel units

    $250 (Avg Bid)
    $250 平均报价
    14 竞标
    glass mold designer 已经结束 left

    I am looking for someone to do some drawings for me for a tequila bottle similar to the attached but larger 375ml

    $398 / hr (Avg Bid)
    $398 / hr 平均报价
    28 竞标

    I am thinking of starting a cosmetic line. I am looking for a logo. company name is 4i cosmetics. short and sweet. something to catch attention. I need a logo design

    $523 (Avg Bid)
    $523 平均报价
    102 竞标
    Connector sign 已经结束 left

    I need a 3d design (stl file) of a small plastic component which is a dual cylinder at an angle.

    $109 (Avg Bid)
    $109 平均报价
    7 竞标

    We have designed our company cloth cover designs we need to manufacturer it in Bangalore. additional details will be given over chat

    $148 (Avg Bid)
    $148 平均报价
    4 竞标
    exhibition 已经结束 left

    we are alquds for plastic an Egyptian company, we are going to participate in an exhibition in Ecuador and we need an usher.

    $1578 (Avg Bid)
    $1578 平均报价
    2 竞标

    We are a plastic manufactory located in China. Our factory can produce literally everything in plastic. From balance bike components to sports equipment(small to medium size). We make steel mold material and injection ourselves. Our current "famous" clients are Decathlon and Onix which are in sport industry. **We are looking for start-up or small companies

    $4077 (Avg Bid)
    $4077 平均报价
    11 竞标

    We're a new start business making Granola in beatiful Whistler, B.C. Canada. Our product will be packaged in a 310 mg plastic pouch. The pouch is unique as it is 100% biodegradable plastic. Being environmentally friendly is important for our brand and how we want to connect with customers. Our company name is "Whistler Granola". Whistler is a famous

    $633 (Avg Bid)
    $633 平均报价
    60 竞标