Soldering工作

筛选

我最近的搜索
筛选项:
预算
类型
技能
语言
    工作状态
    441 soldering 搜到的工作,价格货币为 HKD
    i need a arduino coder 已经结束 left

    i have a existing code for diy soldering station that need for some modification for my current arduino project , the current project is just have code to control PID heater control, but want to add a ac air pump control in the existing menu function

    $101 (Avg Bid)
    $101 平均报价
    9 个竞标
    cable soldering 已经结束 left

    Need someone with experience soldering cables/wires to connectors. This will need to be performed at a clients location in northern Minnesota (indoors/heated). Hotel and meals provided/paid.

    $117 - $195 / hr
    $117 - $195 / hr
    0 个竞标

    I built and LED matrix with WS2811 Through Hole leds. My solder job was apparently not the best and there is an error (or multiple) within the matrix. There are 4 leds from each LED. They are shown in the picture attached. From left to right, Data in, ground, 5v, data out. The matrix is aligned so that the ground leads run to the top and 5v at the bottom. Data lines must be connected so there a...

    $1161 (Avg Bid)
    $1161 平均报价
    14 个竞标

    I built and LED matrix with WS2811 Through Hole leds. My solder job was apparently not the best and there is an error (or multiple) within the matrix. There are 4 leds from each LED. From left to right, Data in, ground, 5v, data out. The matrix is aligned so that the ground leads run to the top and 5v at the bottom. Data lines must be connected so there are wires running from the data out of o...

    $1426 (Avg Bid)
    $1426 平均报价
    9 个竞标
    SMT soldering work 已经结束 left

    sold components on my pcb board max 1 hr work . qty of boards - 5

    $132 (Avg Bid)
    $132 平均报价
    5 个竞标
    SMD Soldering work 已经结束 left

    smd Soldering on my boards its max to max 1 hr work. location- only delhi and noida

    $66 - $164
    $66 - $164
    0 个竞标

    I need somebody with tools and skills to perform some basic USB and Ethernet connection soldering directly on the board. This project is for LONDON ONLY. I will need to meet you in person to give you the boards that needs to be done.

    $1138 (Avg Bid)
    $1138 平均报价
    3 个竞标

    Hey, I need a proper copy of a PCB which is 2,6cm*1,1cm, on the PCB there are 2 soldering pads and 3 other parts.

    $206 (Avg Bid)
    $206 平均报价
    6 个竞标

    Hi, I need an electronics person to tell me a simple and cost-effective way to slow down a noisy air-con 3 speed motor (refer picture attached). It's 230v and has 5 wires from it (presumable no capacitor). If possible to buy any part(s) online from Amazon or similar site. I can use a soldering iron!

    $218 (Avg Bid)
    $218 平均报价
    3 个竞标

    I currently take apart drones to use the parts for my repairs, and post some off directly to customers. I would like someone who is competent in electronics repairs or something, so that they can easily take apart drones (its mainly just unscrewing things with a bit of desoldering). I am looking for someone to do regular part time work for me in receiving drones, disassembling them and labelling u...

    $117 / hr (Avg Bid)
    $117 / hr 平均报价
    1 个竞标

    Using this tutorial as a base for the project - [登录来查看链接] - update to use a MCP23017 GPIO expander (I2C device) - and add digital read/write to code. Using the adafruit MCP23017 ("Adafruit_MCP23017.h") library (and wire.h or similar library if needed to map I2C pins). Using this board - [登录来查看链接] . Need to map I2C (SDA and SCL pins - suggested using pins 12/SDA and 14/SCL - or other...

    $1317 (Avg Bid)
    $1317 平均报价
    23 个竞标

    Design, provide parts list and project files, etc necessary for a PCB printing service to print and SMT Assemble. This will be used in a VR Hobby project which uses a Qualcomm Snapdragon 821 SoC. Only a small quantity will be required. Components should be selected that are widely available and cost effective. Making sure they are available for SMT Assembly by JLCPCB or similar firm. &bul...

    $148 (Avg Bid)
    $148 平均报价
    4 个竞标

    Small manufacturer of micro connectors needs part time, job based hand soldering for cable assemblies

    $8767 (Avg Bid)
    $8767 平均报价
    1 个竞标
    Goldsmith soldering 已经结束 left

    I need someone who works with gold , experienced to prepare rings : 100$ per ring

    $234 - $1948
    $234 - $1948
    0 个竞标
    Assembly Technician 已经结束 left

    Looking for freelance Module assembly and testing task provider, that include soldering, Job location in Johor Bahru or Singapore

    $3608 (Avg Bid)
    $3608 平均报价
    3 个竞标

    Deliverable: Design a PCB for a simple circuit using surface mount components. Simulate the circuit to ensure the PCB design is functional and provide a final bill of materials (BOM) for parts needed. I am a PhD student and the project lead. We have designed a simple circuit which uses an Arduino Pro Mini (3.3v 8Mhz) and a couple through-hole components (1 RTC board, 2 transistors, 2 resistors). ...

    $1286 (Avg Bid)
    $1286 平均报价
    33 个竞标

    I require the Complete PCB design and Firmware for the following: RF Transmitter: 434,000 MHz PCB to fit pre-designed enclosure Battery Operated 3V CR2032 Preferred Transmitter power >10dBm Minimum Standby Current draw <10nA PCB solder bridge to select Channel 1 or 2 Channel Selection done via a soldering bridge. Eg. Channel 1 J1, Channel 2 J2 Each Transmitter should be unique as to not int...

    $5557 (Avg Bid)
    $5557 平均报价
    15 个竞标
    STATIC VOLTAGE STABILIZER 已经结束 left

    To design and build prototype of full solid-state static voltage stabilizer using IGBT/ MOSFET in PWM AC Chopper/Inverter topology with Buck Boost Transformer with any suitable DSP IC # Deliverables WORKER MUST PROVIDE : 1. Complete and detailed Schematic Diagram of the product. 2. Complete artwork of the PCB including laser print out of the tracks and pads, laser print out of component layou...

    $14456 (Avg Bid)
    $14456 平均报价
    3 个竞标
    electronics pcb assembly 已经结束 left

    soldering [登录来查看链接] bga assembly programming soldering inspection

    $31 / hr (Avg Bid)
    $31 / hr 平均报价
    2 个竞标
    Sony TV repair 已经结束 left

    I have a broken LCD TV panel on my Sony KDL 50W805B. Can't find anywhere where to buy the panel for this model. I'm sufficiently skilled in soldering and repairing to follow instructions to install in it a LED panel (and other driving board?), instead of the original LCD panel, if you have the know-how.

    $1343 (Avg Bid)
    $1343 平均报价
    3 个竞标

    soldering up small microcontroller boards for a field trial. Needs to be located withing 40km of nong wua so or udon thani in thailand

    $17535 (Avg Bid)
    $17535 平均报价
    3 个竞标
    Logodesign Spacenerds 已经结束 left

    I' m planing an YouTube Channel Spacenerds. One Part is Makerspace all things about the Maker Szene. The Other one ist a about Space, Stars, planets. I want a Logo with a Space Theme, a group (5 people) with Spacesuits and armed with soldering Iron. Drilling Machines, Hot glue gun, Open wrench. The Text Spacenerds in the bottom maybe on a Planet, where they all.

    $457 (Avg Bid)
    $457 平均报价
    28 个竞标
    Trophy icon Design Logo - 29/09/2019 15:30 EDT 已经结束 left

    Hey Everyone , i have small repair shop and web site for mall-in-repair I'm specialist in Mobile motherboard repair (micro soldering) I'm looking for a logo Brand Name : Hamad Fix check this picture maybe help you

    $538 (Avg Bid)
    加保
    $538
    365 项参赛作品
    Soldering work 已经结束 left

    We need an experienced soldering person for a week's long time. Working location is in Madil, near Marol Naka metro station.

    $1185 (Avg Bid)
    $1185 平均报价
    5 个竞标
    Circuit Design Engineer 已经结束 left

    We are looking for a talented and driven hands on Electrical Engineer who will be part of creating an incredible cutting edge technology system. And will focus on the design, construction, and troubleshooting of compact and reliable embedded electrical systems . This includes electrical sub-system design, integration, PCB layout, and frequent hands-on work in lab building and debugging electrical ...

    $273 / hr (Avg Bid)
    $273 / hr 平均报价
    31 个竞标

    I currently take apart drones to use the parts for my repairs, and post some off directly to customers. I would like someone who is competent in doing repairs of drones. I am looking for someone to do regular part time work for me in receiving drones, disassembling them and labelling up the parts and storing them. You will then be required to post the parts off to different customers as and when y...

    $117 / hr (Avg Bid)
    $117 / hr 平均报价
    4 个竞标

    Requirement: I would like assistance from someone who has the skills to create a coin scanning solution which can detect all Australian coins and feed the data back to an android application via blue-tooth signalling (application will be developed to suit the output from the coin scanner) Design, build instruction and physical prototype will be required as the output of this task (I will consider...

    $24019 (Avg Bid)
    $24019 平均报价
    4 个竞标

    I currently take apart drones to use the parts for my repairs, and post some off directly to customers. I would like someone who is vaguely competent in electronics repairs or something, so that they can easily take apart drones (its mainly just unscrewing things with a bit of desoldering). I am looking for someone to do regular part time work for me in receiving drones, disassembling them and la...

    $164 / hr (Avg Bid)
    $164 / hr 平均报价
    2 个竞标

    We are seeking an experienced (2 years or more) electronics engineer to perform a component and circuit board test on a single smart metering circuit board and associated components. The engineer is to receive board and components from vendor in China, perform testing, and send board and components to USA after testing is completed. The engineer should have all the necessary computer serial interf...

    $1403 (Avg Bid)
    $1403 平均报价
    10 个竞标

    We are leading aerospace company specializing in the design and manufacture of autonomous Unmanned Aerial Systems (UAS) for security organizations, defence & first responders. We do not develop just products, but up-scale solution to enhance human capabilities by allowing us to be more faster, more precise and more responsive to challenges and how to solve it. We are looking for Electronic E...

    $10030 (Avg Bid)
    $10030 平均报价
    27 个竞标

    I need a very simple circuit board designing in a form that is complete for low volume manufacture. The board really is not much more than a busbar - inputs are 24V and 0V supply via screw down pcb mount terminal block. There will be three rows of 8 screw terminal blocks - lets call them A, B and C. All connections in row A will be +24V, all the B 0V and all the C + 5V. Thus I get 8 possible p...

    $756 (Avg Bid)
    $756 平均报价
    35 个竞标
    Technician 已经结束 left

    looking for an expert, who have good experience in soldering PCB devices

    $132 (Avg Bid)
    $132 平均报价
    4 个竞标

    We need a USB power cable replaced on a few device of ours. Detailed instructions will be provided. The job will require a soldering station, glue gun , screw drivers & zip ties. New power cables will be provided by us, any consumables can be directly charged to us. It would approximately require 10 minutes of end to end process time for each individual unit. We can provide a desk for workin...

    $3117 (Avg Bid)
    $3117 平均报价
    5 个竞标
    3D engineer 已经结束 left

    I want to make a small octahedral device, that will contain small buttons on each of the faces and, cap for a battery and on the inside a housing to insert a breakoutboard (11.15mm x 16.5mm). It has to be 3d printed and the parts should be assembled so as to make it possible to house the components in a way soldering is The buttons foot print is 5x6.5 mm

    $1044 (Avg Bid)
    $1044 平均报价
    27 个竞标

    Goal: A working acoustic altimeter for paragliding (Called Variometer) My situation: I already have printed PCBs, Eagle files and all the necessary parts for it. I need someone who can solder the parts on the PCB and upload the code. So i can try it in the air. I tried soldering a prototype but it was too small for me. Not used to tiny SMD parts. The circuit is based on a Atmega328. It has aro...

    $1317 (Avg Bid)
    $1317 平均报价
    19 个竞标
    Project for Juan Jose B. 已经结束 left

    Hi, i hope you can help me out. My situation: I tried soldering a prototype but it was too small for me. Not used to tiny SMD parts. I have printed PCBs, Eagle files and all the necessary parts for it. I need someone who can solder the parts on it and upload the code. So i can do a testrun. The product is a accoustic variometer for paragliding which is based on a Atmega328. It has around 20 par...

    $390 (Avg Bid)
    $390 平均报价
    1 个竞标
    Project for Indir O. 已经结束 left

    Hi Indir O., I noticed your profile and would like to offer you my project. My situation: I tried soldering a prototype but it was too small for me. Not used to tiny SMD parts. I have a printed PCB, Eagle files and all the necessary parts for it. I need someone who can solder the parts on it and do some testing if it works. The product is a accoustic variometer for paragliding which is based on ...

    $390 (Avg Bid)
    $390 平均报价
    1 个竞标

    Hi, I'm basically looking to simplify an existing PCB design powered by 2 x AAs. It's currently a motion sensor that flashes a LED for a few seconds, then runs the motor one way then the other. What I would like is the exact same thing but without the time delay. So requirements would be: - PIR picks up movement - Motor turns one way for approx 1 second then runs the other way for 1/4 ...

    $324 (Avg Bid)
    $324 平均报价
    16 个竞标
    Micro soldering -- 2 已经结束 left

    I Need an Expert in soldering for Smartphone

    $195 (Avg Bid)
    $195 平均报价
    1 个竞标

    built 10 or more small plastic enclosure box with off the shelf circuits wifi, battery charge controller, push on switches and battery. some soldering requiere. we will provide all the materials sent from aliexpress. We are open to suggestions for final parts. we will pay shipping to our location for the finished boxes

    $195 (Avg Bid)
    $195 平均报价
    8 个竞标

    [Update] Pls check repository, lib has been written, only gui part is left for implementation [登录来查看链接] Based on our soldering robot project (modified 3d printer), we would like to transform the existing python code (kivy, python, opencv, pcb-tools) into a platform to scan assembled pcb. In this project, we program the scanner platform: 1) teach in PCB from pic & place file (CAD created file...

    $4076 (Avg Bid)
    $4076 平均报价
    18 个竞标

    We are looking to create a PCI-e expansion board based on a PEX8796 chip. The desired function is to connect 5 PCI-e x16 gen 3.0 devices on the board, the lanes are routed to the chip and allows for communication with 1 PCI-e slot to a main motherboard. (similar to the board in attachment). An NDA is to be signed to provide the needed confidential information about the Broadcom chips. Experience ...

    $20240 (Avg Bid)
    $20240 平均报价
    16 个竞标
    Open THT Soldering Robot 已经结束 left

    For our projects we looking building an simple application to control modified 3d printer as soldering robot. Inspired from the following modification. [登录来查看链接] The application will be written in python 3 and published as open source under the following link: [登录来查看链接] It contains the following features: - It has a simple gui (e.g. Tkinter) to read gerber or nc-drill file with pcb-tools or alte...

    $2050 (Avg Bid)
    $2050 平均报价
    3 个竞标

    For our projects we would like to have a simple automated assembling inspection of a pcb with python script. In a first step we will use images, later we will improve the concept to use hdmi frame grabber card. Several pictures of the pcb are given to the script and it must inspect the pcb. If a criteria is violated, the component and/or soldering pad in question must be marked on the image. Inspe...

    $1855 (Avg Bid)
    $1855 平均报价
    11 个竞标
    Bluetooth Soldering Iron 已经结束 left

    The project requires 3 different parts: 1. The PCB in order to control the "Weller RT" tips. This controlling board should be small and under the format of a pen. (See links) The main features of this board should be: - Bluetooth connectivity, such as the main way to control the board and adjust the temperature is over a smartphone within an app. - USB Type C connector, so that any la...

    $8004 (Avg Bid)
    $8004 平均报价
    18 个竞标

    We are a manufacturer to produce cable processing machines such as wire terminal crimping machines, USB soldering machines, thermocouple welding machines, cable cutting and stripping machines and on. Our prices are competitive and quality is good. We want to find sales representative all over, in every destination where it is posible, to carry on the job of local sales agents. Before establishin...

    $19483 (Avg Bid)
    $19483 平均报价
    2 个竞标

    I'm searching for an electrician, in the area of Europe (or from the land of cheap shipping) to make me possibly large (10-200pcs) quantities of project parts that require soldering. The Image attached contains all the visual information about the orientation of the parts. All the components are listed and linked in the bottom of the project description, to be acquired by the maker. The bat...

    $10209 (Avg Bid)
    $10209 平均报价
    3 个竞标

    I am looking for someone to lay out a simple (dummy) PCB for soldering practice for students. Ideally if will have 0603, 0805, 1206, SOT-23, SOP-8, SOP-24 and a few through hole parts.

    $832 (Avg Bid)
    $832 平均报价
    52 个竞标

    As a fintech IOT company which is incubated in NASSCOM, we have access to one of the best hardware labs in town. We are hiring a team of dedicated and smart individuals for our venture - a company is what the people working in it make it. As is the case with most startups, those who join in early get rewarded earlier. We are a funded venture, started by industry veterans, and we are committed to m...

    $9593 (Avg Bid)
    $9593 平均报价
    11 个竞标

    As a fintech IOT company which is incubated in NASSCOM, we have access to one of the best hardware labs in town. We are hiring a team of dedicated and smart individuals for our venture - a company is what the people working in it make it. As is the case with most startups, those who join in early get rewarded earlier. We are a funded venture, started by industry veterans, and we are committed to m...

    $109 / hr (Avg Bid)
    $109 / hr 平均报价
    15 个竞标