Usb hardware design pic工作

筛选

我最近的搜索
筛选:
预算
键入
项技能
语言
    工作状态
    8,041 usb hardware design pic 找到的工作,价格在 HKD

    我需要重修一个现有的网站。我已经有设计方案,我需要你为我的项目建立一个网站。

    $1360 (Avg Bid)
    $1360 平均报价
    13 竞标

    我公司有一个项目, cy7c68013A_128 单片机的软件开发, 细节是用GPIO模仿Jtag烧录两片Xilinx的PROM. (XCF04S, XCF01S). Xilin有比较详细的方案。 见副件。 如果你们承接这类工程, 请你给我一个报价。 我们有硬件平台, 你们需要提供, 1 windows usb 的驱动, 指定等待下载的文件。 Cy7c68013A 的程序,把指定的文件烧录到目标PROM. 启动系统, 读取FPGA内部寄存器,确定烧录成功。

    $4352 (Avg Bid)
    $4352 平均报价
    1 竞标

    Hello, I need someone who have experiences in USB Hid device. Chinese candidates are preferred. 有一个usb hid设备,不是普通的键盘鼠标之类,没有确定的usage id,需要通过stm32f105读取并发送数据给该设备。 目标是搞清楚如何与该设备通信,并提供单片机源码和原理说明。

    $3827 (Avg Bid)
    $3827 平均报价
    2 竞标

    在SD账号1年以上,荣誉值1000以上。电子产品安卓系统的USB防水内窥镜线长1M。防水摄像头配备6个LED灯,拍摄的图片清晰明亮, 超迷你摄像头外直径7mm. 在各平台上为热销产品,销量几千。

    $1216 (Avg Bid)
    $1216 平均报价
    1 竞标

    电子产品安卓系统的USB防水内窥镜线长1M,链接手机电脑拍摄小视屏。6个LED灯的摄像头可以保证拍摄清晰的照片,摄像头外直径7MM. 希望寻找美国市场的电子产品销售网站账号合作等。

    $392 (Avg Bid)
    $392 平均报价
    1 竞标

    使用USB CDC类实现USB转串口windows驱动 ,实现的windows 驱动可以和我们硬件设备正常连接工作稳定。 使用USB CDC类实现USB转串口windows驱动 ,实现的windows 驱动可以和我们硬件设备正常连接工作稳定。

    $5882 - $11763
    $5882 - $11763
    0 竞标

    使用USB CDC类实现USB转串口windows驱动 ,实现的windows 驱动可以和我们硬件设备正常连接工作稳定。 使用USB CDC类实现USB转串口windows驱动 ,实现的windows 驱动可以和我们硬件设备正常连接工作稳定。

    $5882 - $11763
    $5882 - $11763
    0 竞标

    *** NEED THIS DONE WITHIN 3 HOURS *** Hello please design 3 properly dimensioned facebook pieces. Very simple Follow word doc instructions and check out the website listed there.

    $314 (Avg Bid)
    $314
    8 作品

    We are building a solution for a customer and that customer would like to build some code to integrate with Hardware Security Modules, in particular Thales nShield, and Gemalto Luna. We are looking for developers with experience in this very niche are to help us program some code. Be prepared to share very detailed and specific experiences and development

    $416 / hr (Avg Bid)
    $416 / hr 平均报价
    12 竞标

    Build a phasor measurement unit which should show voltage current and power factor leading or lagging with fault [login to view URL] voltage as refer...should show voltage current and power factor leading or lagging with fault [login to view URL] voltage as [login to view URL] give full write up/explanation then matlab simulation then hardware .You may use IOT also

    $4486 (Avg Bid)
    $4486 平均报价
    6 竞标

    Hi, using EXEOUTPUT and PHP, fetch and show the hardware serial numbers (motherboard, bios, harddisk). shell_exec(wmic ......) works in PHP using web browser, but doesnot work inside EXEOUPUT. MAKE SURE IT IS DONE USING EXEOUPUT ENVIRONMENT only. Bid only if you can start immediately and work within the mentioned budget only. 5* ratings are assured

    $112 (Avg Bid)
    $112 平均报价
    1 竞标

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    $5497 (Avg Bid)
    $5497 平均报价
    12 竞标

    We have built a POS system and we have one element outstanding which is to print a receipt on our EPSON terminal printer locally on USB. We need source code which will first detect the default printer and print a certain document . A tip would be using QZ which can be found on [login to view URL]

    $1647 (Avg Bid)
    $1647 平均报价
    5 竞标

    ...ability to: Design and implement an IPv4 VLSM addressing scheme that fulfills the requirements Design and implement an IPv6 VLSM addressing scheme that fulfills the requirements Design, configure, verify, and secure EIGRP for the necessary networks Design, configure and verify PaGP, RapidPVST+, and First Hop Redundancy Create detailed design documentation

    $549 (Avg Bid)
    $549 平均报价
    12 竞标

    I will supply an APK that was wrote to work on a native android device with NFC reader and i need to be adapt to an Android device that have a USB NFC reader. i will provide the reader drivers from the USB NFC reader.

    $3572 (Avg Bid)
    $3572 平均报价
    9 竞标

    I need a logo designed for Instagram. I already have one I’d like copied but changed please. Thank you

    $206 (Avg Bid)
    $206 平均报价
    54 竞标

    Hi, We looking for a freelance who can program PIC controller to interface with android app. Develop Android app. PIC controller to logic solver for digital inputs and output relays. Analogue inputs.

    $21089 (Avg Bid)
    $21089 平均报价
    27 竞标

    I'm creating a youtube channel devoted to beer enthusiasm and gaming. We can discuss designs once I've seen some of your work. The last time I posted this project I received too many bids far too fast which led me to believe that this may not be getting read. Add your favorite beer at the bottom of your bid. Thanks,

    $204 (Avg Bid)
    $204 平均报价
    33 竞标

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    $2635 (Avg Bid)
    $2635 平均报价
    6 竞标

    I'm on the look out for some hardware development assistance for a project that one of my customers would like to embark upon. Fundamentally they would like to design a box build solution that concentrates on time lapse photography and the delivery of the images. The project will potentially use either a Beaglebone Black or Raspberry Pie processor

    $14288 (Avg Bid)
    $14288 平均报价
    9 竞标

    We need a Virtual assistant that can help us to improve out Facebook Groups...Also we need someone who can search in other groups for users and invite them to our group. (we make here one text that we can write basically every user) Facebook Group: "PC Hardware Games - Mods, Help and more" Also talking with sponsors could be really interesting for us.

    $157 / hr (Avg Bid)
    $157 / hr 平均报价
    15 竞标

    A freelancer has to build a program based on PIC, that automatically manages the data flow direction of the RS-485 serial port from RS-232, taking into account the baud rate and the number of bits, without any special configuration or software command, i.e, totally transparent to the MCU. It must be 100% compatible with Modbus! Freelancer has to deliver:

    $204 (Avg Bid)
    $204 平均报价
    3 竞标

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    $133 (Avg Bid)
    $133 平均报价
    7 竞标

    It is a module that have to comand a relay to switch on/off 220Vac (80A) by GSM.-

    $15488 (Avg Bid)
    $15488 平均报价
    39 竞标

    We are interested in development of hardware based on ESP 32 with Peripherals such as GPS, BLE, WiFi for interfacing with OBD port of vehicle. The freelancer should be well experienced on ESP and would undertake entire project right from the stage of schematic design to complete pcb layout and the firmware writing.

    $21958 (Avg Bid)
    $21958 平均报价
    27 竞标

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    $212 (Avg Bid)
    $212 平均报价
    2 竞标
    USB re-director tool. 已经结束 left

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    $235 (Avg Bid)
    $235 平均报价
    2 竞标
    Remote usb server 已经结束 left

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    $235 (Avg Bid)
    $235 平均报价
    3 竞标

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    $408 (Avg Bid)
    $408 平均报价
    3 竞标

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    $345 (Avg Bid)
    $345 平均报价
    6 竞标

    The Chemical/Material specialist: Will sign an NDA related to product information. Will establish testing procedures for a specific application of dilatant(shear-thickening) fluids and will be expected to provide evidence for a go/no go decision based on the physical properties of possible materials. Will identify suitable membrane materials to contain the fluid and further meet the requirement...

    $9536 (Avg Bid)
    保密协议
    $9536 平均报价
    5 竞标

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    $627 (Avg Bid)
    $627 平均报价
    8 竞标

    注册或者登录后来查看详情。

    加封 保密协议

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    $78 - $235
    $78 - $235
    0 竞标

    We are looking for someone to provide a tested hardware solution to modulate and demodulate a digital communication FSK in frequency: 185Khz for Mark (1) and 131Khz for Space (0). This solution will be used to encode/decode a serial communication with 9600bps. The solution must include hardware filters to reject noise. We accept the bid only if you

    $4337 (Avg Bid)
    加精
    $4337 平均报价
    8 竞标

    Need a pic designed up using the attached pic as the feature with the two cricket club logos also featuring evenly in some way. Colour scheme should be taken from the green & gold in Dromana CC logo. I’ll be awarding a winner today - so let’s see what you can do creatively ... but quickly! Text for pic: CONGRATS JACKY-BOY We’d like to congratulate

    $220 (Avg Bid)
    $220
    4 作品

    All Details are contained within the attachment to this project. Please be sure to read through it carefully. Good luck.

    $1341 (Avg Bid)
    $1341 平均报价
    5 竞标
    awesome pic 已经结束 left

    I need someone to alter some images.

    $39 / hr (Avg Bid)
    $39 / hr 平均报价
    2 竞标

    ...the Cypress EZ-USB chip and will be driven by a C/C++ program running on the PC. The C/C++ program will be written in modular format, with functions for each individual elementary/basic control of the devices that we want to control or monitor. Since this project will be part of a course for student training, all software and hardware will be clearly

    $1365 (Avg Bid)
    $1365 平均报价
    3 竞标

    There is a PIC 16F1936 (28 pin SSOP) currently working on a PCB. We want to keep the PCB design (RC6 and RC7 excepted, as seen later) to a PIC with more pins: PIC 16F1939. Furthermore, we want to use three more pins for AD conversion as the current one. The aim is doing the following implementations in MPLab: Migrate from the PIC 16F1936 (28 pin SSOP)

    $1725 (Avg Bid)
    $1725 平均报价
    28 竞标

    I need an arduino program that controls a machine. The system consists of three relays, two proxy switches, a rotary encoder, cycle start button and increment button

    $1310 (Avg Bid)
    $1310 平均报价
    16 竞标

    We need to make a site (like Swiggy works for restaurant) for our hardware shops, which shows which product is available on which shop. Is it possible to make, if yes then what would be the requirements and what will be your charges, please suggest.

    $1906 (Avg Bid)
    $1906 平均报价
    19 竞标
    Trophy icon Make custom character based on this pic 已经结束 left

    I need a logo for my gaming channel along with a matching banner and panels. The logo would be a cartoon design/character design based on the pic attached. I only need the HEAD for this. The panel designs would need to have the words mentioned in file - panel names The banner size would need to be 1920 x 480 The panel designs would need to be 320

    $220 (Avg Bid)
    担保
    $220
    42 作品

    ...take photos. Type of freelancer you're looking for - Never stop challenging - Can be manage the project and do the scratch development - iOS developer who has knowledge of UVC(USB video class) and OpenCV ref- [login to view URL] Anything unique about the project or team - The Github and the Jira will be use

    $10022 (Avg Bid)
    $10022 平均报价
    39 竞标

    ...PC->HDMI->FPGA->HDMI->Monitor 2) PC->USB-> FPGA 3) The PC will send information to the FPGA and create an overlay on the monitor. This software on the PC could be coded in C++ or C. Example, DrawText(x, y, "Truck #19 ready for shipment.") There are many samples online but my knowledge is too limited to combine USB communication and Drawtext or shapes

    $2831 (Avg Bid)
    $2831 平均报价
    7 竞标

    The PCED (Phy...certain specifications and parameters (listed in the attachment) - Installing/uploading this software into small pieces of hardware. - Having two pieces of hardware wirelessly connect - Minimizing the net size of the hardware pieces except for manual functions such as its dials and buttons - Use of vibrational mechanisms - Arduino*

    $1129 (Avg Bid)
    $1129 平均报价
    4 竞标

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    $1882 (Avg Bid)
    $1882 平均报价
    12 竞标

    Can anyone build a proof-of-concept or MVP like [login to view URL] Or any other option with Unity3D with Virtual reality box. Any creative ideas are welcome?

    $148272 (Avg Bid)
    $148272 平均报价
    3 竞标

    We have a PIC32 based controller that has a PHY 10/100 Port. We would like to implement a BACNet Cient on this hardware. TCP/IP stack is working on the board. We have an existing software with which this code has to be integrated. Need someone with good experience in PIC32, TCP/IP Stack and BACNet Client implementation to get the code written, tested

    $6407 (Avg Bid)
    $6407 平均报价
    2 竞标