建筑工程 Jobs

I’m developing a 120 ft × 70 ft goat shed with a contemporary look and need a complete CAD package to move the project into fabrication. The structure will have a gable roof, steel columns and trusses, a full slatted flooring support system sitting 5 ft above grade, and GI sheet roofing. Internally, please allow for an integrated animal feeding area, and engineer the frame to perform reliably in high-wind conditions typical of the site. The scope includes modelling and drafting every primary element: • 3D model of the full shed • AutoCAD-compatible DWG file • PDF drawing set containing plan, elevations, sections, and the column layout Accuracy around member sizing, connection points, and floor-slat supports is essential; I’ll be coordinating directly...

Seeking comprehensive structural calculations for a residential reinforced concrete house. Deliverables must include load analysis, reinforced concrete design for foundations, beams, columns, slabs, and staircases, bending and shear checks, reinforcement schedules, material specifications, and compliance with applicable codes. Provide clear assumptions, calculation sheets, structural drawings summary, and design rationale. Experience with residential RC design and attention to constructability and safety are essential. Timely, professional, and verifiable work required.

Necesito que calcules el armado de negativos y forjados realizados con estructura prefabricada de placas alveolares y verifiques con Cypecad la estructura completa de un edificio residencial bajo, de hasta tres niveles, yo te suministrare un archivo de autocad con planos del edificio. El encargo es urgente: requiero resultados lo antes posible. Al finalizar deberás entregarme: • Archivo original de Cypecad perfectamente organizado por plantas • Planos estructurales listos para impresión en formato DWG y PDF • Memoria de cálculo con hipótesis, combinaciones de cargas y comprobaciones de normas • Listado de cuantías y detalles constructivos Trabajo en sistema métrico y aplicaré las normas locales de hormigón ...

Looking for an Architectural Identity Designer We are looking for a designer or design studio to develop the architectural identity of a logistics project. The scope includes: Architectural design concept and visual identity. Facade design language and materials. Signage and wayfinding concepts. Design guidelines that can be applied across future logistics developments. Preferred candidates should have experience in logistics, industrial, commercial, or real estate projects and be able to share relevant work samples. Please send your portfolio and contact details for review.

I need a typical engineering drawing for a steel window shroud to be fitted on a residential steel-framed house. The design must consider wind load. Requirements: - Detailed construction drawings - Fixing details included - Wind load considerations - Steel material for the shroud - Verification and adjustment of approximate dimensions Ideal Skills and Experience: - Structural engineering background - Experience with steel framed constructions - Proficiency in detailed construction drawings - Understanding of wind load calculations

I need updated architectural drawings to brick in 5 windows at the rear of 5 commercial retail shops in Dromana for fire safety compliance. The shops were originally built in 1985, and I have the original plans. Requirements: - Modernized style, not a close match to original 1985 plans - Sufficient detail for building surveyor to issue a building permit Ideal Skills & Experience: - Proficiency in architectural design and modernization - Experience with building permit requirements - Ability to work from and adapt old architectural plans Please ensure your bids reflect experience in similar projects and a clear understanding of compliance requirements.

I need detailed calculations for a steel mezzanine floor intended for storage. The load capacity should be between 200-500 kg per square meter. Requirements: - Structural integrity assessments - Load distribution analysis - Material specifications using steel Ideal Skills: - Civil or structural engineering background - Experience with steel mezzanine design - Proficiency in load calculation and structural analysis The floor is installed and has been for a few years the landlord wants a report to say it’s fit for use It’s approved 8x6m steel columns stair case 38mm new floor and glav joists

I need 1-2 sliding windows relocated. The windows are in good condition and do not need any repairs. Need a structural analysis

Hello, I am looking for an Architectural Engineer to look at a project I have to remove a fireplace. The home owner wants to remove a few walls and the fireplace in the middle of the house. Thank you,

Looking for an Architectural Identity Designer We are looking for a designer or design studio to develop the architectural identity of a logistics project. The scope includes: Architectural design concept and visual identity. Facade design language and materials. Signage and wayfinding concepts. Design guidelines that can be applied across future logistics developments. Preferred candidates should have experience in logistics, industrial, commercial, or real estate projects and be able to share relevant work samples. Please send your portfolio and contact details for review.

I need an experienced structural engineer to calculate the specifications for a steel support beam. This beam will be used to support a wall removal under a second floor in a residential building. Key requirements include: - Calculating load capacity and beam dimensions - Ensuring compliance with local building codes - Providing detailed engineering drawings Ideal Skills and Experience: - Degree in structural engineering - Experience with residential projects - Proficiency in structural calculation software - Strong understanding of steel construction Please provide relevant work samples and qualifications.

Für unser mittelständisches Bauunternehmen brauche ich jemanden, der für größere Trockenbau-Aufträge professionelle Angebote erstellt. Was dabei für mich zählt: • Du arbeitest in einer spezialisierten Bau-Software, damit Positionen, Mengen und LV-Texte sauber strukturiert sind. • Jedes Angebot enthält eine nachvollziehbare Kalkulation der Material- und Arbeitskosten; Stunden- oder Pauschalansätze führst du transparent auf. • Nach Fertigstellung formatiert und prüfst du das Dokument, damit es versandfertig beim Kunden ankommt – inklusive kurzer Begleitmail, falls gewünscht. Ich liefere dir alle Pläne, Massen und erforderlichen Zusatzinfos. Du ergänzt die professionelle Formulierung, kalk...

I need precise 2-D structural drafting in AutoCAD for an ongoing project. The immediate focus is on beams, columns, foundations, and all related reinforcement details, delivered as clean DWG files plus PDFs ready for review. I will supply the architectural reference plans and my hand-marked sketches; you translate them into professional structural drawings that follow standard layering, linetypes, and clear dimensioning. Accuracy is critical because these files will feed directly into my quantity-surveying workflow in Excel and, ultimately, the site supervision reports I prepare in Microsoft Office. Deliverables • Separate DWG sheets for beams & columns, foundations, and reinforcement layouts • Matching PDF plots at A1 scale • A brief drawing register noting file n...

I need an experienced architect or designer to help me replan an existing bungalow and add 4 additional bathrooms. Key Requirements: - Increase overall living space - Design and integrate 4 new bathrooms, 2 on each floor - Work within existing structure and design - Add a 4' x 18' covered verandah on first floor - Add two bay-windows, H52" x W72" Ideal Skills: - Architectural design - Structural Engineering - Experience with residential extensions - Strong spatial planning Looking for innovative solutions to maximize space and functionality.

MUST be a licensed Australian structural engineer I’m preparing construction documentation for five attached townhouses and now need the structural timber layout and roof system professionally engineered. The floor system will be built around Hyjoist members, so every beam, joist and connection detail must be sized, spaced and specified with that product range in mind, following the relevant Australian Standards from start to finish (AS 1684, AS 1720, AS 1562.1 and companion codes). Roofing is to be finished in Colorbond metal sheeting, so I also need battens, tie-downs, bracing and overhangs detailed for wind design to AS 4055 and AS 1170.2. Please reflect any manufacturer requirements for the selected Colorbond profile. Key deliverables • Signed structural calculations (P...

I’m finalising the plans for a residential building and now need a structural engineer who can take charge of the concrete beams and columns. The overall architecture is settled; what’s missing are detailed structural calculations and drawings that guarantee every beam and column is sized, reinforced, and connected correctly for a concrete-framed home. You’ll be working with a standard set of architectural PDFs (floor plans, elevations, sections) and the soil report. Using these, I expect you to: • Produce clear beam and column schedules with all dimensions, reinforcement, and concrete strengths specified. • Provide calculation sheets (hand or software-generated) that reference the applicable residential building code for load combinations, deflection limits...

I’m looking for an experienced construction project manager who is already based in St Kitts and Nevis. My immediate need is for someone who can help me identify and secure viable residential and commercial build opportunities on the islands, then transition straight into managing those jobs from ground-break through hand-over. Here’s what success looks like to me: within the first month you will have presented a shortlist of qualified projects, complete with initial feasibility notes and stakeholder contacts. Once we green-light a site, you’ll move into full project oversight—coordinating contractors, liaising with local authorities, and keeping me updated on progress and risks. If you’re also comfortable taking the lead on budgeting, scheduling, or on-site ...

I'm seeking an experienced renovation specialist to update my apartment in Maddi, Egypt. The project includes minor internal redesign and supervision of the work. Key Requirements: - Renovate living room, kitchen, bathroom, and main sitting area - Change doors throughout the apartment - Minor structural changes allowed - Modern design style (white or off-white tones preferred) - Designer must be based in Cairo and able to visit the apartment for an on-site assessment after agreeing on the cost Ideal Skills & Experience: - Proven experience in residential renovation - Strong understanding of modern design principles - Ability to manage and supervise renovation teams - Excellent communication skills Please provide detailed bids with timelines and portfolios. Looking forward to yo...

Seeking an Alabama-licensed structural engineer. 20' × 32' concrete house with cast-in-place reinforced concrete roof slab spanning approximately 20 feet between exterior walls and fully grouted reinforced CMU walls with continuous reinforcement. Intended as a tied concrete/masonry shell with continuous load paths and greater wind resistance than typical local residential construction. Formal wind rating is not required. Looking for engineering review and refinement of an existing concept rather than a complete redesign. Please include relevant experience, estimated fee, and turnaround time.

I need a skilled contractor to build an insulated patio over the roof, designed primarily as an entertainment area. The patio should feature an outdoor kitchen equipped with an insulated weather wall and horizontal shutters above the wall. Key Requirements: - Insulated roof panels for roofing material - Outdoor kitchen with insulated weather wall and horizontal shutters Ideal Skills and Experience: - Experience in constructing insulated patios and outdoor kitchens - Proficiency in working with insulated roof panels - Strong design skills to create an attractive and functional entertainment area Please provide examples of similar work done and a detailed quote.

I need a detailed photometrics plan for the exterior of a warehouse, focusing on perimeter fencing. Requirements: - photometrics for light at property lines for county approval Ideal skills and experience: - Expertise in photometrics - Experience with commercial properties, especially warehouses - Knowledge of lighting standards and safety regulations Please provide a portfolio with similar projects.

I will forward you the SketchUp model of a small indoor-garden room together with my instructor’s assignment PDF and comments. Using that information, I need you to develop a clean, professional HVAC drawing set that mirrors the quality of the sample plan and section I’ve supplied. Scope of work • Produce a scaled HVAC plan that clearly shows Supply-Air and Return-Air routes, complete with airflow arrows, duct sizes, and dimensions. • Draft a matching HVAC section illustrating all ductwork, the FCU, diffusers, grilles, balancing dampers, and any other relevant components in their correct locations. • Apply the correct symbols, labels, and notes exactly as required by the assignment brief. • Organise the system logically so the arrangement makes engi...

I need an expert to size an air conditioner for my single-family home located in Seminole County, Florida with 5 or more rooms and a square footage of 2000-3000 sq ft. Ideal skills and experience: - HVAC knowledge - Experience with residential AC sizing - Ability to calculate BTU requirements based on home layout and insulation

I need an MEP engineering stamp for a new single-family home construction. Key Requirements: - Professional engineering stamp required - MEP systems design and approval - Compliance with local building codes and regulations Ideal Skills and Experience: - Licensed MEP engineer - Experience with residential projects - Knowledge of local regulations

I need a licensed engineer in Oregon to examine and approve my structural plans for a residential building. These plans need to be submitted to Clackamas County. Key requirements: - Examine and approve structural plans - Must be licensed in Oregon - Experience with residential building plans - Knowledge in foundation, framing, and roofing Ideal Skills and Experience: - Licensed Structural Engineer in Oregon - Expertise in residential construction - Familiarity with Clackamas County regulations

I need a licensed structural engineer to visit my home in Oakton, VA and document the flatness of an existing concrete floor (under 1,000 sq ft). Your onsite survey should capture slope, high points, and low points, then compare the readings to both NWFA guidelines and the specific manufacturer’s tolerances for this product. The final deliverable I’m expecting is a concise, signed report I can share with the installer and warranty team, clearly stating: • precise elevation variances across the room, • identification of any areas that exceed allowable tolerances, and • recommendations, if needed, to bring the substrate into compliance. Because access and scheduling matter, only professionals who can travel to Oakton quickly should apply. Please outline...

I’m preparing to develop a brand-new residential townhouse from the ground up and need a construction specialist who can take the project from the initial planning stage right through to hand-over. Because this is a completely new build, I’ll rely on you for accurate scheduling, material take-offs, quality control, and on-site coordination with any required subcontractors (plumbing, electrical, HVAC, etc.). My ideal partner is comfortable interpreting architectural drawings, securing the necessary local permits, and keeping costs transparent as the build progresses. If you already work with reliable trades—or can recommend trusted options—that is a plus. Experience with modern, energy-efficient building methods will also be highly valued. Deliverables I expect...

I need an engineer to design a gravity block retaining wall for erosion control. The wall should be sturdy and effective, using block materials. Requirements: - Design a gravity retaining wall - Use block materials - Purpose: erosion control - Need Nebraska license and stamp of approval Ideal skills and experience: - Civil or structural engineering background - Experience with retaining wall design - Knowledge of erosion control techniques

I need an experienced technician to maintenance kitchen fire suppression systems.

I have an existing set of MEP AND structural drawings that now need a fresh review and PE stamp from an engineer currently licensed in the State of Texas. Your task is to revise the structural sheets themselves—checking member sizes, notes, details and any calculations you consider necessary—so the final package is ready for building-department submission without further edits from my side. I will supply: • The current PDF and CAD files of the structural set • Any reference documents you request (survey, geotech report, architectural background, etc.) I need back: • Updated drawings in both CAD and PDF formats, bearing your Texas PE seal and signature • A concise calculation package (PDF) that supports the revisions you made, if calculations were req...

We are looking for a structural engineer to provide calculations and a report for a bespoke aluminium pyramid rooflight that we have designed. The purpose of the assessment is to determine the maximum safe working load that can be suspended from a central M12 eye nut located at the apex of the rooflight for a chandelier installation. Project information: • Drawing attached We would like you to review the design and provide: • Structural calculations • Maximum permissible suspended load at the eye nut • Safe Working Load recommendation • Deflection assessment • Written structural report suitable for client records Please can you let us know if you can do this above and your fee and estimated lead time for carrying out this assessment. I have attached ...

I need a load capacity analysis for a ground floor weight-bearing wall. I can obtain the architectural plan. Ideal Skills and Experience: - Structural engineering expertise - Experience with load capacity analysis - Ability to interpret architectural plans Please include relevant experience in your application.

I need a 12 x 16 rustic sunroom addition designed and permitted in Pendleton, Oregon. The sunroom will be used seasonally and should incorporate wood and glass materials. Key requirements: - Design should reflect a rustic style. - Construction documents needed for permit submission to the State Building Department. - Knowledge of Oregon building codes and regulations is essential. Ideal skills and experience: - Background in residential design, especially rustic designs. - Experience with permitting processes in Oregon. - Proficiency in drafting detailed construction documents. I included two chat renderings that the customer likes. Also all the drawings are provided by the customer. Looking at picture 755, you can see they already removed the solar panels so that we can do the additi...

I sale my design in 300 - 1000 ruppes

The project is a 2,400-square-foot convenience store with fuel service. I already have the core concept and building parameters; what I need from you is a single, highly detailed floor plan that captures both the structural requirements and the full interior layout. Building parameters to incorporate • Single-slope storefront with open rafters (9 ft to the bottom of rafters on the back wall), spray-foam insulation, and all exposed steel/rafters painted black. • Free-span interior—no load-bearing walls. • Concrete slab and footings; 2 × 6 framing. • Metal roof and siding, plus a 42-inch brick wainscot along the front façade and brick corner columns up to the eaves. • Double front glass doors with picture windows running the full width a...

I need a Florida licensed structural engineer to provide a signed and sealed flat roof nail pattern for a residential building project. Ideal skills and experience: - Florida engineering license - Experience with residential structural design - Knowledge of flat roof systems and nail patterns - Attention to detail and compliance with state regulations Please provide your credentials and relevant experience.

I’m ready to move forward with a complete fire-sprinkler design package for a multi-storey office building here in Atlanta. This is a commercial project and, at this stage, I only need the design itself—no installation or ongoing maintenance support yet. The drawings must comply with all applicable NFPA standards, City of Atlanta codes, and local AHJ requirements. You’ll take the architectural and reflected ceiling plans I provide and develop: • Full sprinkler layout drawings in AutoCAD or Revit (DWG + PDF) • Hydraulic calculations (NFPA-compliant printout and spreadsheet) • Material and equipment schedule with model numbers • Design narrative outlining code references, density/coverage assumptions, and water supply data I’ll consider the work ...

I’m finalising the structural package for a multi-storey hotel and need a complete set of reinforced-concrete drawings prepared from my architectural layouts. Please translate the plans into clear, construction-ready RCC documentation that satisfies local code requirements for commercial hospitality projects. Deliverables • Floor plans with all elevations marked and dimensioned • Detailed structural sections showing beam, slab, and column reinforcement • Foundation layout and footing details, including schedules I’ll supply the architectural CAD files, design parameters, and soil report as soon as we kick off. Please return layered DWG and printable PDF sheets, fully coordinated and ready for engineer sign-off. Accuracy, clarity, and adherence to standard...