土木工程 Jobs

I need a structural design for a Pre-Engineered Building (PEB). The layout is already prepared, and I'm looking for an expert in steel construction. Key requirements: - Structural design expertise for steel PEBs for non-industrial commercial building - Familiarity with local building codes is a plus Ideal Skills and Experience: - Proven experience with PEB structural design - Strong knowledge of steel construction techniques - Ability to work with pre-existing layouts Please provide relevant samples of your work.

I'm seeking a licensed Utah PE to stamp my existing deck replacement plans for a residential project. Requirements: - Must be a licensed Professional Engineer in Utah - Experience with residential construction projects, specifically deck work - Ability to review and approve existing plans Ideal Skills: - Structural engineering expertise - Knowledge of Utah building codes and regulations - Attention to detail and accuracy Please provide your credentials and relevant experience.

I already have a complete set of site plans for a small, new residential street in Virginia. What I now need is a Virginia-licensed civil engineer who can review the drawings, make any minor code-compliance edits that you feel are necessary, and then apply your professional seal and signature so the package is truly permit-ready. The core drawings cover layout, grading, drainage, roadway profile and basic utility runs. They were produced in AutoCAD Civil 3D, and I can supply both the DWG files and a combined PDF set. Your role is to confirm that everything meets current state, county and (where applicable) VDOT requirements, address any red-flag items, and return a signed-and-sealed plan set that the building department will accept without further revision. Deliverables I’m expecti...

Need a PE to review and stamp my drawings for the installation of 2 triangle windows in the gable end wall of a full log home built about 1980 in Charlotte near Lake Norman. I am a NC Licensed Residential Contractor and will be responsible for the window installation. Also need PE to review/design/stamp drawings for 2 basement egress windows to be installed in same house on opposite sides of 24' wide basement. To have approx. 3'w x 6' h egress window x 6' d to existing ground level. A different NC Licensed Contractor will be responsible for the egress window installation but we will be working together on both parts of the project for the homeowner. It is imperative that the PE selected will NOT adhere to the whimsical and radical "requirements" of the Charlo...

My renovation timeline depends on rock-solid numbers for every impervious surface on my property—the driveway, all patios and walkways, and the full roof footprint. These measurements are required by local authorities, so accuracy is non-negotiable. Deliverables • A table of square-footage values for the driveway, patios/walkways, rooftop, and the combined total. • A scaled diagram (PDF/DWG/PNG) with each surface clearly outlined and labeled. • A short methodology note so local authorities can see exactly how the figures were derived. Only freelancers living near Louisville, KY should bid because I need the awarded freelancer to come to my property.

I need a licensed structural engineer to prepare and wet-stamp complete construction drawings for a 30' × 50' × 12' cow shed built from galvanized steel tube framing. The generic supplier plans I have on hand are already rated for 140 mph wind loads, but the county will only accept site-specific, engineer-sealed documents. Scope • Turn the existing generic layout into permit-ready structural drawings that satisfy current IBC and local codes. • Show all member sizes, connection details, foundation/slab design, bracing, and fastening schedules suitable for galvanized steel. • Confirm the 140 mph design wind speed (or advise if a different value is required for code compliance) and document all load calculations. • Provide signed, wet-st...

I'm seeking a qualified professional to review and document the work done on my new garage foundation. The old garage has been demolished, and the foundation wall has been built, but I have questions and need an independent review and documentation of work completed Requirements: - Review and document the work to date - New foundation wall is complete - Material quality and consistency - Structural integrity - Dimensions and alignment Documentation Needed: - Detailed written report - Photographic evidence with annotations Ideal Skills and Experience: - Structural engineering expertise - Experience with foundation work - Strong attention to detail - Ability to provide clear, professional documentation Looking forward to your bids!

I’m preparing detailed quality control document for upcoming roadway projects and need a civil engineer who has spent at least three years working specifically on road projects. Your core task will be to interpret MoRTH specifications, IRC publications and the pertinent IS codes while organising the resulting calculations, checks and notes inside Excel worksheets. A solid grasp of flexible and rigid pavement procedures, material specifications and quality-control parameters will help you move quickly through the work. On the software side, I only expect basic Excel proficiency—formulas, tidy data entry and clear formatting are enough—so long as you can keep the calculation sheets transparent and traceable. If you are confident navigating MoRTH clauses, cross-refere...

I need a professional measurement of the total square footage of impervious surfaces on my residential property for renovation planning. The surfaces to be measured include: - Driveway - Patios/Walkways - Rooftop Ideal skills and experience: - Experience measuring residential properties - Proficiency in calculating square footage of various surfaces Please provide accurate and detailed measurements.

I'm reaching out to see if you would be interested in assisting with a retrospective engineering assessment for a residential project at Paddington, QLD. Ideal Steel was engaged by Finlayson Timber & Hardware to prepare shop drawings and fabricate a bespoke curved staircase and custom balustrades. Our scope was limited to the fabrication and supply of the steelwork—we did not install the balustrades or provide engineering certification. The builder has now requested a Form 15 for the bespoke steel balustrade system. We are seeking an engineer to assess the installed balustrades, including the fixing/connection design, and, if compliant, issue a Form 15 – Compliance Certificate for Building Design or Specification. We previously approached another engineer who advise...

I'm seeking a detailed soils report to aid in planning a residential construction project. The report should focus on: - Soil composition analysis Ideal skills and experience: - Expertise in geotechnical engineering - Experience with residential construction projects - Ability to provide clear, detailed reports Please provide relevant experience in your bids.

I have a building concept ready and now need the civil engineering plans that cover the structural layout only. Your task is to translate the architectural footprint into clear, permit-ready structural drawings. Key expectations • Show column grid, foundation dimensions, beam and slab details, reinforcement schedules, and all pertinent notes for code compliance. • Provide both editable CAD files (DWG) and clean PDFs suitable for submission. Please follow the governing local code for load calculations and detailing. If you typically work with tools such as AutoCAD, Revit, or Civil 3D, let me know—file compatibility matters. Accuracy, clarity, and on-time delivery will be the basis for acceptance.

I’m launching a new-build commercial project in Australia and need a licensed structural engineer to carry it from concept to hand-over. The role covers three core tasks: producing certified design drawings, running full structural analysis, and providing ongoing construction supervision to ensure the work on site matches what we have on paper. Because this is a ground-up build, everything must comply with the National Construction Code and relevant Australian Standards for steel and concrete. I usually coordinate in Revit and AutoCAD, so fluency with those—or compatible BIM and analysis tools such as ETABS or SPACE GASS—is important for a smooth exchange with the architect and services consultants. Deliverables • Certified calculation package ready for council lod...

I have a building concept ready and now need the civil engineering plans that cover the structural layout only. Your task is to translate the architectural footprint into clear, permit-ready structural drawings. Key expectations • Show column grid, foundation dimensions, beam and slab details, reinforcement schedules, and all pertinent notes for code compliance. • Provide both editable CAD files (DWG) and clean PDFs suitable for submission. Please follow the governing local code for load calculations and detailing. If you typically work with tools such as AutoCAD, Revit, or Civil 3D, let me know—file compatibility matters. Accuracy, clarity, and on-time delivery will be the basis for acceptance.

I need a structural engineer to verify the safety of removing a non-load-bearing wall in my residential property on the ground floor.

I’m looking for a detail-oriented quantity surveyor to take my commercial project’s AutoCAD plans and elevations and extract precise façade quantities. Your focus will be on Steel and Aluminium panels only; no structural or interior take-offs are required. Here’s what I need from you: • A clear digital take-off showing how every façade panel and steel member was measured, with references back to each drawing. • An itemised Bill of Quantities in Excel (or similar) that I can forward straight to suppliers, ready for pricing. • All calculations and assumptions documented so the figures can be audited later without reopening the drawings. Accuracy is critical, so please be comfortable working directly in AutoCAD and cross-checking elevatio...

I need rafters built for a garage roof, which will be covered with metal roofing. There will be two dormers on the front and matching dormers on the back. 8' width on the dormers. I need to know the size of the rafters using menards I-Joists, and the size of the ridge board. Do I need a ridge board or beam. The walls are concrete ICF. Requirements: - Roof size: 42x38 feet - Medium pitch (5/12 - 9/12) Ideal Skills and Experience: - Carpentry expertise - Experience with metal roofing structures - Knowledge of load-bearing calculations and rafter spacing Please provide samples of previous work.

I need a basic structural sketch focusing on framing for a Rockland Mass building inspector. Requirements: - Structural drawing expertise - Basic sketch detail - Framing elements only Ideal Skills: - Proficiency in structural design - Experience with basic structural sketches Inspector said he just needs basic report 8 1/2 x 11 not size C or D

I need a structural engineer to evaluate my home built on an active lateral field. Key Issues: - Foundation cracks - Uneven floors The primary goal is to plan for repairs. The ideal candidate should have experience with homes on unstable ground and be able to provide a detailed repair plan and cost estimate.

I have a four-storey, 4,000 sq ft historic townhouse that was recently scanned with a Leica BLK unit. The point-cloud files are already packaged as *.blk, so you’ll need Cyclone (to register and slice the cloud) and AutoCAD to create the drawings—without both, you simply won’t be able to work with the data. Scope • Draft one accurate, dimensioned layout per floor (ground through fourth) based on the cloud. • Show existing framing and wall locations, door and room openings, and give particular attention to every window position and size. • No structural details beyond framing lines and no MEP—this is strictly a basic layout with dimensions. Deliverables • Four DWG files, one for each level, layered and clean. • A single, collated PD...

I'm looking for a skilled professional to design a pier and beam foundation for a house without internal load-bearing walls. Key requirements: - The site has sandy soil. - I have basic sketches of the house. - I will excavate and use forms to place the footer, then backfill. - The perimeter of the crawl space will be 2 rows of 6 inch ICF blocks. Ideal skills and experience: - Expertise in foundation design, especially for pier and beam systems. - Knowledge of sandy soil dynamics. - Ability to work from basic sketches. - Prior experience in residential foundation projects.

I am self-employed contractor installing pumps for various applications, and a university researcher in water engineering who is currently expending my knowledge in the field. To bridge the gap between my practical hands-on experience and my academic research/studies, I am seeking an experienced water or mechanical engineer specializing in pumping and hydraulic systems for professional construction, guidance, and technical support.

I want to take a standalone metal carport from a rough idea all the way to a fully commissioned structure on my site in Bangalore. I’m looking for someone who can handle each stage seamlessly—concept drawings, structural calculations, BOM, fabrication, installation and final hand-over—so I only have to deal with one point of contact. Key requirements • Structure: free-standing, steel or aluminium members with a clean contemporary profile that complements a modern home. • Roof & cladding: durable sheet or panel solution that can accept integrated PV modules without additional reinforcement. • Power: integrate roof-mounted solar panels, wiring, inverter and a small battery pack so the system can run motion-sensor LED lighting and feed excess power ...

I need a complete reinforced-concrete swimming pool design for a site in Queensland that will operate as a commercial facility. The concept has not been locked into a specific shape yet, so I am open to your professional advice on the most efficient geometry; what matters is that the structure meets Australian Standards (AS 3600, AS /NZS 1170 series, and local council requirements) and is robust enough to handle continuous public use. Australia Because the pool will include a diving board, I expect special attention to deeper-end load cases, impact and shear reinforcement, and the detailing of the platform anchorage. Please allow for the additional wall thickness, stepped floor profile, and any anti-slip finishes that the code requires around diving areas. I will supply the site surve...

I have a series of octagonal and high-mast poles scheduled for fabrication and need a seasoned structural engineer to take them from concept to customer-approved documents. Your role begins with the wind load analysis and carries through to full pole design, detailed structural calculations, and production-ready AutoCAD drawings. All work must comply with IS 875, IS 800, IS 802, IS 2062 and IS 4759, so familiarity with these Indian Standards is essential. I will provide preliminary dimensions and loading criteria; you will translate that information into: • Verified wind load calculations • A clear, well-structured calculation report (PDF + editable) • Complete manufacturing drawings in AutoCAD (DWG + PDF) • A concise design dossier formatted for client approval...

I have a building concept ready and now need the civil engineering plans that cover the structural layout only. Your task is to translate the architectural footprint into clear, permit-ready structural drawings. Key expectations • Show column grid, foundation dimensions, beam and slab details, reinforcement schedules, and all pertinent notes for code compliance. • Provide both editable CAD files (DWG) and clean PDFs suitable for submission. Please follow the governing local code for load calculations and detailing. If you typically work with tools such as AutoCAD, Revit, or Civil 3D, let me know—file compatibility matters. Accuracy, clarity, and on-time delivery will be the basis for acceptance.

I need an expert to estimate the maximum number of lots possible under R40/R60 residential zoning for subdivision. Requirements: - Optimize for maximum lots in a given land area - Use of zoning regulations: minimum lot size, setback requirements, and maximum building height Ideal Skills: - Experience with residential zoning regulations - Strong analytical and optimization skills - Ability to provide clear, detailed estimates

I have a civil engineering project that now requires a professionally drafted structural drawing set. The architectural layout and key dimensions are already settled; what’s missing is a clean, permit-ready package that clearly communicates every load-bearing element. Scope The work is strictly structural. No mechanical or electrical layers are needed—just the plans that show how the building stands up. Your task is to translate the provided sketches and notes into clear, consistent CAD drawings that comply with typical industry standards. Deliverables • Foundation plan • Floor framing plan • Roof framing plan Each sheet should be fully dimensioned, include member sizes and call-outs, and be formatted for both PDF review and a native CAD file (DWG or...

I’m coordinating an Environmental Impact Assessment and need an experienced civil/environmental engineer who can translate field data and my preliminary sketches into precise AutoCAD drawings that slot straight into the report. Here’s what I’m looking for: • Clean, layered DWG files of site layout, grading and any mitigation structures referenced in the assessment. • PDFs ready for immediate inclusion in the EIA document. • Quick turn-around on minor revisions so the report schedule stays on track. You’ll receive my survey notes, GIS shapefiles, and the draft EIA narrative. Please keep symbology consistent with standard environmental-engineering conventions and include a brief drawing register so everything is easy to track. Final deliv...

I'm looking for a skilled structural designer to create plans for a new single-family home. The key priority for this project is cost-effectiveness. Ideal skills and experience include: - Expertise in designing cost-effective residential structures - Experience with new building designs, particularly for single-family homes - Strong understanding of local building codes and regulations - Ability to create efficient, sustainable designs without inflating costs Submit your proposals with relevant experience and a portfolio of past work.

I need an internal brick wall and external wall replaced with RSJs in my residential home. You will also need to create architectural and structural drawings for the project. Requirements: - Experience with structural modifications in residential properties - Ability to create detailed architectural and structural drawings - Knowledge of building regulations and safety standards - Proficient in working with brick walls and RSJs Ideal Skills: - Structural engineering background - Previous experience with similar residential projects - Strong attention to detail and accuracy Please provide a portfolio with relevant experience.

I have already modelled and drafted the tie-in system for three tower cranes and produced the accompanying shop drawings. What I now require is a seasoned structural engineer to give the study a thorough check, close any technical gaps, and issue the final documents I can submit to the client and the site team. Scope of the review The core of the assignment is to validate every structural aspect of the ties—confirming the load paths, verifying the adequacy of each tie-in point on the building, and checking that the material selections and grades match both code and manufacturer limits. My existing shop drawings, connection details, and preliminary notes will be at your disposal from day one. Deliverables • Signed and referenced load calculations (crane and building actions...

I need detailed floor plans for a single-family home. The design should emulate a barndo aesthetic but be constructed as a traditional stick-built home on what we are thinking will be a 4' frost wall. Key Requirements: - Floor plans for a single-family residential building - Architectural design mimicking a barndo look - Stick-built construction on a foundation porches on 3 sides -large garage - considering turning the truss system at garage to have a bonus room over garage but concerned about potential moisture issues. Looking to have a mother-n law suite and were told that it would be less expensive to build over garage than over the bedrooms of the living quarters great room concept with vaulted ceiling - want beams - have a a picture of a basic floor plan we like but have some a...

I need a Filipino architect or civil engineer to put together a full but straightforward design package for a small apartment project. The concept is already defined as “simple,” so the emphasis is on clear documentation rather than elaborate styling. Here’s what I expect to receive: • 2-D floor plans that spell out room dimensions, suggested furniture layout, and logical traffic flow. • Exterior elevations and at least two perspective renders to help me visualise massing and façade treatment. • Coordinated structural, electrical, plumbing, and mechanical drawings that line up perfectly with the architectural sheets. • A complete bill of quantities covering materials, labour, and a concise cost estimate. AutoCAD (or Revit, if you prefer...

I’m building an underground wet-well pump station with an internal footprint of 4 m × 6 m and a clear internal height of 4 m. I need a full set of construction documents that will let a contractor break ground immediately. Structure The station will be cast-in-place concrete, so size the base slab, walls and cover slab, specify reinforcement, concrete grades, joints and water-stops, and integrate a practical corrosion-protection strategy suited to wastewater service (increased cover, coatings, additives or similar). Drawings & documents Please deliver a coordinated package that includes: • Architectural plans and sections showing access openings, equipment room layout and finished levels. • Structural drawings with reinforcement schedules, bar marks, con...

I have a full set of detailed structural plans for a new building and need a civil engineer to extract accurate material quantities from them. Your focus will be on concrete and steel only—no other materials are required at this stage. What I expect from you: • A clear, itemised Bill of Quantities showing volumes of concrete (by grade where applicable) and weights of reinforcing steel, broken down by structural element. • A brief calculation sheet or annotated take-off showing how you arrived at each figure so I can trace the numbers back to the drawings. • Delivery in Excel or an equivalent editable format. All drawings are ready to share as soon as we start, and I can answer any clarifying questions about sections, elevations, or load paths. Accuracy is mor...

BIDDERS - IMPORTANT NOTES BIDS MUST INCLUDE ALLOWANCE FOR THE PROVISION OF CERTIFICATION OF THE BIDDER’S DESIGN BY A REGISTERED PROFESSIONAL ENGINEER OF QUEENSLAND (RPEQ) AS A MANDATORY PART OF THIS PROJECT. RPEQ REGISTRATION DETAILS (Name and 5-digit registration number) ARE TO BE PROVIDED INITIALLY BY THE BIDDER AS A MADATORY PART OF THEIR BID. ONLY “VERIFIED IDENTITY FREELANCERS” SHOULD BID. BIDS MADE THAT DO NOT FACTOR IN THE ABOVE NOTED INFORMATION WILL NOT BE CONSIDERED AND WILL AUTOMATICALLY BE DISQUALIFIED FOR CONSIDERATION. This project has been posted multiple times after being withdrawn on the same number of occasions because in each case, bidders have either not been qualified or, have provided misleading information about their ability to properly unde...

Looking for someone to help with an AGTEK project. Must be proficient in both earthworks 4d, and materials 4d.

Looking for a licensed surveyor and civil engineer to conduct boundary surveying and topographical survey on-site at 531 K St, Sanger, CA. Additionally, require a stamped civil drainage plan. These tasks can be split between professionals if needed.

I need to design small road 152 m connected to a roundabout. Route of cl is available. Width available. [previous design available. I need the geometry , profile and Cut/Fill quantities

I'm seeking an experienced engineer to design seismic restraints for non-structural MEP components in our upcoming project. Key Requirements: - Restraint design for HVAC systems (including air handling units, ductwork, chillers, and all equipment/distribution systems) - Restraint design for plumbing systems (including piping systems, pumps, tanks, all equipment/distribution systems, and medical gas) - Compliance with relevant seismic codes and standards -PE stamp OH, IN, KY Ideal Skills and Experience: - Expertise in seismic design and restraint systems - Proficiency in engineering design software - Knowledge of MEP systems and their operational requirements - Strong attention to detail and accuracy - Previous experience with similar projects Please provide examples of related wo...

I have two non-commercial pergolas already installed and mounted on a newly built one-story steel rooftop deck. Each unit sits installed on four factory aluminum inserts that are through-bolted to the deck; the pergola posts are anchored to those inserts with single 10" bolts at the base. The city will only sign off once a licensed engineer confirms the assemblies can resist local wind pressures and possible up-drafts at roof level. I can supply a full package of blueprints, photos, and existing engineering specifications for both the deck and the current pergola installation. What I need from you: AN ACTIVE STATE OF IL LICENSE • Complete wind-load analysis in accordance with the applicable building code (IBC / ASCE 7) and current building codes. • Recommendations fo...

Site Planning for a two acre Texas parcel with a small home. I plan to add a couple of flex space warehouse units and eight small living units around the existing home that is on this parcel. Nearby, Tesla, Intel and Space X will be building their new Terafab chip building factory. This site will support this buildout through providing accomodation and office/warehouse facilities. I'll provide a survey and some rough drawings and guidelines. You will provide scaled plans for my engineer and the county. There will be a lot of back and forth to get this correct. If you have knowledge of Texas unrestricted planning, please describe. The more, the better. Through the process of iteration, seeking information and receiving input from professionals and the county (Grimes county), I'...

I'm seeking detailed structural plans for a living room renovation in Armada, Michigan. The project involves wall removal and addition. Ideal skills and experience include: - Expertise in structural engineering - Experience with residential renovations - Knowledge of Michigan building codes - Ability to create detailed, compliant structural drawings Please provide examples of similar work.

I need a structural calculation for a concrete retaining wall, which will support a new extension with a height of 1 meter. Key requirements: - Calculate load-bearing capacity - Ensure compliance with height specifications - Provide detailed design calculations Ideal skills and experience: - Civil or structural engineering background - Experience with concrete retaining walls - Knowledge of local building regulations and codes - Strong analytical and problem-solving skills Looking for accurate and professional work to ensure safety and stability of the new structure.

Titre : Réorganisation d'un plan de parking sur AutoCAD (.DWG) Description : Je cherche un dessinateur AutoCAD (idéalement avec expérience en aménagement de parkings / VRD) pour réorganiser un plan de parking au format .DWG. Contexte du fichier : Parking de stockage de voitures, actuellement en stationnement dense (voitures collées, sans allées de circulation). Emprise principale ~284 × 84 m, ~1 987 voitures (blocs « voiture » type berline 4,95 × 1,90 m). Plan légèrement incliné (~16°), géoréférencé. Travail demandé : Créer des allées de circulation de 6 m entre les files, permettant d'entrer dans une place en un seul coup de vola...

I have an ETABS and SAFE model of an industrial building and need to model it in STAAD Pro. I will provide you with architectural drawings, material specifications, and any initial data I have. Your job is to build the STAAD model, assign dead, live, wind, and other related loads realistically, perform a thorough structural analysis, and provide clear and traceable results. My expectations are: • A clean, layered .std model that reflects the geometry exactly as submitted. • Comprehensive load calculations and combinations set up in STAAD Pro • A concise PDF or Excel report that provides a summary of the reactions, member forces, deflections, and any important notes or warnings revealed by the solver. • All assumptions are stated so that I can check them against the...

I need a skilled contractor to lift my house structurally and add a basement. This renovation aims to create additional living space. Key Tasks: - Structural house lift - Construct new basement area - Install pony wall The ideal candidate should have: - Proven experience in structural renovations - Knowledge of local building codes and regulations - Strong understanding of foundation work and structural integrity Please include relevant experience and a timeline in your bids.

I need a detailed drawing for a short run of traditional-style concrete stairs that will start at first-floor level, turn 90° in front of the lift gate, descend roughly eight standard risers alongside a newly proposed lift shaft, and then tie seamlessly into the existing staircase (which will be partially demolished to suit the new geometry). The goal is to give my civil contractor a set of plans that keep material and labour costs low without compromising safety or code compliance. Please base the design on in-situ reinforced concrete with a smooth finish and incorporate economical detailing—standard tread-to-riser proportions, simplified reinforcement layouts, and practical shuttering notes. I expect: • Plan, section and elevation views showing exact dimensions, landing ...

I’m seeking a licensed builder in Sydney who can step in on a part-time basis to manage a brand-new commercial childcare centre from the first footing through to final handover. The site is secured, plans are approved, and trades are lined up—I now need an experienced professional to take the lead on-site, keep the programme moving, and sign off each milestone under your NSW Builder’s Licence. The role centres on ground-up construction: coordinating subcontractors, monitoring quality, maintaining safety compliance, and preparing the documentation council and certifiers expect for a childcare facility. We’ll agree on the number of days per week you’re on site (likely two to three), with flexibility around busy stages such as slab pour, framing, and final fit-o...