ATXMEGA sviluppo IOT -- 2
€1500-3000 EUR
货到付款
EASIOT Requirements:
What we need:
The MCU used on the board is an ATXMEGA128A3AU
We need a porting of the Arduinio IDE and a working bootloader that can be wrote via usb port.
We also need the following Arduino libraries:
1) RF interface handling via AT86rf212b + CC1190 (Atmel tranceiver module + TI power frontend) in particular, we need:
a. Porting of Atmel Bitcloud library with working fullmesh connection capability and the possibility to assign END-DEVICES, ROUTER and COORDINATOR roles to devices.
b. “Network” and “ID” values need to be assignable
2) WIFI interface management (generic chip controlled via AT commands) in particular, we need:
a. Connect /disconnect survey
b. capability to switch the module on and off
c. Open client tcp/udp connections
d. Open TCP/UDP server (listening for connections)
3) Creation of MQTT client module (there is already one working with Arduino + ethernet shield)
Documentation provided on request:
- Circuit schematics
- Wifi module specs and documentation
- datasheets of modules used on board
MILESTONE:
1) Working Bootloader e ARDUINO IDE
2) RF interface management as per point 1)
3) Wifi interface management as per point 2)
4) MQTT Client as per point 3)
项目ID: #6620952
关于项目
1 威客就此工作平均出价 €2319
Hi there- My name is imran.I am highly Expert in this field. I'll provide you satisfaction. So your time and money will be safe when you will award me project. take a look at my Freelancer Portfolio