a project for dobreiiita

This input is sent from a text file to the program.

1) 4850 # rated number of watts

2) 10 # panels are installed pointing 10 degrees west of north *

3) 5 # panels' output is reduced by 5% due to orientation

4) 40 # panels are installed at 40 degrees from horizontal *

5) 10 # panels' output is reduced by 10% due to install angle

6) 30 # wiring from panels to inverter is 30 metres in length *

7) 2 # this length of wiring causes a power loss of 2%

8) 97 # the inverter is on average 97% efficient

9) 1.5 # the panels' output will reduce by 1.5% per year

10) 5.5 # the average number of hours of effective sunshine is 5.5

• * These values are not important to the program, but the lecturer wants to insert these values to the program with the text file, what matters are the values which are not marked with a star. Those values are initialized by their respective constructor and they are used to do some calculations

Files associated with no 1) are ratedpower.h and rated [url removed, login to view] this is the rated power of the panel

Files associated with the 3) are orientation.h and [url removed, login to view]

Files associated with the 5) is tilt angle.h and [url removed, login to view]

Files associated with the 7) is cable.h and [url removed, login to view]

Files assocated with the 8) is inverter.h and [url removed, login to view]

Files associated with the 9) is teh panel.h and [url removed, login to view]

Files associated with the 10) is the sunhours.h and [url removed, login to view]

There is a file called solarpanel.h and solar [url removed, login to view], they should contain functions to calculate the

1) Average out put power = average power = rated power - (_cableloss * rated power) - (inverlerloss * ratedpower) - (orinetationloss * ratedpower) - (inverterloss *rated power)

Other instructions would be in the files uploaded .

C++编程

项目ID： #4459260

关于项目