Find Jobs
Hire Freelancers

An electronic device and PCB layout designed

$30-250 CAD

已关闭
已发布超过 8 年前

$30-250 CAD

货到付款
I have an idea for a small, simple device. The device will light an LED and start a programmable timer when it's orientation is tilted, and when the timer expires it will shut off the first LED, and light a second one. Resetting the circuit will be performed either by tilting the device back into its neutral position, or by way of the activation of a momentary contact switch. In the case of the use of the switch, resetting will zero and restart the timer. The device should draw virtually no power in neutral position, and minimal power in its active state. I'd like to use a long lasting, relatively inexpensive, small form factor battery. The maximum size of the board will be 8cm x 5cm. I'd like the schematic and PCB layout designed, and provided in a standard format for manufacturing.
项目 ID: 8353057

关于此项目

24提案
远程项目
活跃8 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
24威客以平均价$156 CAD来参与此工作竞价
用户头像
hi sir i am an expert electrical engineer i can do it for you i have almost 7 years of experience in this field i assure you quality work and on time delivery please reply to discuss it further regards
$126 CAD 在3天之内
4.8 (169条评论)
7.5
7.5
用户头像
A proposal has not yet been provided
$147 CAD 在7天之内
4.9 (28条评论)
7.0
7.0
用户头像
Hello! How are you? Nice to meet you! I want to help you and I think I have the perfect skills! Send me a message to talk more about your circuit! Have a nice day1
$150 CAD 在5天之内
5.0 (63条评论)
6.6
6.6
用户头像
I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department FAST National University Pakistan. I am also continuing my MS degree in Electrical Engineering with specialization in Control. I have taught the followings courses, and also supervised Projects related to these subjects. 1. Control System Design & Modelling (Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL) 3. Digital System Design (Verilog, VHDL) 4. Computer organization & Assembly Language (8086 processor, 8051 controller, Arduino, PIC) 5. Electric Machines Design and Analysis 6. Circuit Analysis and Design 7. PCB Design (Proteous AREAS + Multisim Ultiboard) I assure you, if you assign your project to me, you surely gonna work with me in future.
$200 CAD 在3天之内
4.8 (152条评论)
6.7
6.7
用户头像
A proposal has not yet been provided
$155 CAD 在3天之内
4.9 (74条评论)
6.3
6.3
用户头像
Hello, Have a great day. My name is Shahbaz and iam running a setup for prototyping Electronic devices. We will ship you a fully working prototype. All of the design files will be handed over as well. Please note: due to policy matter, Courier company will not allow the batteries to be shipped. We will provide you link for battery purchase (from EBAY). Please feel free to contact. Best Regards, Shahbaz.
$250 CAD 在25天之内
4.7 (36条评论)
6.4
6.4
用户头像
Hello Sir, I went through your project proposal and it's very interesting and I would like to work on this project. Why you should hire me ? * I have four year experience as a freelancer and I am very efficient. * I have many good feed backs. Please visit this link and see for yourself some of my feedbacks on freelancer.com https://www.freelancer.com/u/Anthony989.html * I can support you if you are willing to mass produce this as a product. I have many contacts in China. *I work full time as a freelancer and I will work as planned,on time. Please contact me if you are interested. I am keenly waiting.
$150 CAD 在3天之内
4.7 (33条评论)
6.1
6.1
用户头像
Hi, Microcontroller based Embedded product designer and developer. We can provide the solution, with a small sized, low cost microcontroller interfaced with a accelerometer module. Hoping to hear more from you. Warm Regards, Geo
$130 CAD 在7天之内
4.8 (7条评论)
5.9
5.9
用户头像
Hi I am interested to this project. I am familiar with electronics, PIC microcontroller as well as PCB design by eagle. Thanks.
$98 CAD 在5天之内
4.8 (68条评论)
5.6
5.6
用户头像
A proposal has not yet been provided
$150 CAD 在2天之内
4.6 (13条评论)
4.7
4.7
用户头像
Hi For the bid amount entered, you will get a complete schematic, pcb layout and CAM files for manufacturing anywhere as well as firmware. For a little more, I would readily make you a complete professional prototype and mail it to your physical address so that you can test it yourself and if all is well send over the CAM files for manufacturing. This is usually a better way as improvements usually come about once a working prototype is at hand. Regards Soumitra
$166 CAD 在10天之内
4.8 (1条评论)
4.4
4.4
用户头像
using PIC micro controller we can develop an device that able to do your algorithm its not that difficult project i can start next Saturday
$246 CAD 在3天之内
5.0 (6条评论)
4.1
4.1
用户头像
I will design the system and deliver Schematic. Bill of materials and source Layout Gerber Firmware All documentation
$155 CAD 在3天之内
5.0 (9条评论)
3.9
3.9
用户头像
A proposal has not yet been provided
$100 CAD 在3天之内
4.6 (14条评论)
3.9
3.9
用户头像
Hello, i'm Daniele Cortellazzi electronic engineer. I'm working as hardware developer, for you project i have some idea to arrive fast to a product. I use the freedom board developed by freescale, for your project we can use the FRDM KL05 where there is an accelerometer for detect the tilt and an RGB led. In short time i can develop the firmware and test it on the FRDM board, after that i can design the pcb. The consumption is very low with this micro, we can use a botton battery for power supply all the system.
$277 CAD 在7天之内
5.0 (1条评论)
2.7
2.7
用户头像
I am an electrical engineer specialized in electronics and communication and also working as instructor in University.I have very good expertise in circuit designing , digital design, communication system etc. I am also Lab instructor in University and have conducted Labs of Circuit design, Digital design. I have also supervised many projects related to Electric and Electronics circuits, Digital design and microcontroller Based Circuits.
$100 CAD 在3天之内
5.0 (6条评论)
2.3
2.3
用户头像
Hello, I am professional prototype engineer with 6 years experience in big automotive company. I work on Eagle CAD. Looking forward to working with you!
$155 CAD 在10天之内
5.0 (2条评论)
1.3
1.3
用户头像
Hello Sir, Don't worry, I am a Electronic Engineer. Do you want Chip ATMEL (arduino) or PIC (microchip). if you think to make this product massively, I recommend microchip or Atmel without Arduino. I am available to start in this moment.
$155 CAD 在3天之内
5.0 (1条评论)
1.1
1.1
用户头像
A proposal has not yet been provided
$55 CAD 在5天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello i want to take my first project on this site, so my price is low. But i am a very experienced electronic designer. I will create the project with all necessary files for producing it everywhere. I have been developing boards for medical and industrial applications. Also i have many projects with smart technologies.
$100 CAD 在5天之内
0.0 (0条评论)
0.0
0.0

关于客户

CANADA的国旗
Canada
0.0
0
会员自8月 28, 2015起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。