Find Jobs
Hire Freelancers

Artwork developed for cutting with CNC plasma

$10-30 USD

已完成
已发布超过 10 年前

$10-30 USD

货到付款
NB. Our Company does CNC designs of all types, Islamic, Hindu but most of our designs are unrelated to religion. e.g. animals, inserts, Wrought Iron, etc. It so happens that we are preparing for the Diwali period in our multi-cultural country so we have a number of these Hindu related pieces to work on. It would be unfortunate if that deters any good prospects. My Company does as many as 5-10 projects like these a month. Successful candidate/s would likely be offered many more similar projects. Once this project is done successfully I have at least 5 more to be worked on. WHAT WE REQUIRE- I require the artwork Kr1 modified to be cut by a CNC plasma system. A more challenging example of the development of a piece of artwork is attached- "Phases in CNC art development". This is to be cut out of one layer of steel so that all of the black areas must be connected sufficiently to ensure that no pieces necessary for the design are left loose resulting in them falling off. Any point that is thinner than 3/16 of an inch would burn off but this would not be a problem if the area is narrowing to a point. Logically a large piece of material must be given adequate connection to the main piece around the design. This can be achieved with many moderately sized connections a a couple wider ones. There is flexibility in modifying the design as what is important is that the artwork is modified to meet requirements tastefully and not allowing too much compromise of the beauty of the artwork. If The modification of the black and white artwork to be prepared for the creation of the cutting path is what is required in this project.
项目 ID: 4995337

关于此项目

8提案
远程项目
活跃10 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
颁发给:
用户头像
Hello! I work in Photoshop, Illustrator and InDesign. So I can do not only Illustrator work. I prepare and do/redraw graphics for engraving. As I understood your project little bit looks like this. You can see my works for engravint: 1) [login to view URL] 2) [login to view URL] 3) [login to view URL] Also if you are interested you can visit my profile: http://www.freelancer.co.uk/u/gldhN.html I have won two contest on this site and one CH (contest holder) had bought my work. If I have time I can do one graphic in one day. Sometimes more. Some moments of your project are not clear to me. So if I interest you, I'd like to get to know some information that I couldn't understand. Hope, you understand all my abilities and will contact me. Best regards, Natali. P.S. I choose price for one graphic like in attached file.
$21 USD 在1天之内
5.0 (1条评论)
0.7
0.7
8威客以平均价$91 USD来参与此工作竞价
用户头像
Hi, I am interested in working on your project. You can check out my previous work in my portfolio to see the quality of my work. I also have to mention that I've done similar work in the past (only for cutting in wood, but I believe principle is the same). I am thinking of completely redrawing this artwork in vector format. Regards, Vlad
$30 USD 在2天之内
5.0 (141条评论)
6.1
6.1
用户头像
I will never disappoint you with my work, kindly see PMB, thanks. I have 7 years experience in designing and developing, I am expert in Photoshop and Illustrator, Auto cad 2D/3D, 3ds Max, vector and cartoon design, I am expert in Template, brochure, logo, business card, banner, flyer, T-Shirt design, I assure you I will give you best quality of work, I will not disappoint you with my work, I will work until your 100% satisfaction, I hope you will consider me, Kindly check my Portfolio, http://www.freelancer.com/u/itdv.html?page=portfolio
$83 USD 在5天之内
4.6 (94条评论)
5.2
5.2
用户头像
Hello! I am interested to work on your project. Ready to start working immediately. Posses extensive experience in similar projects. Working in AutoCAD. Hope to hear from you. Best regards! I drafted the first image just do not know how to send it to you. Price for that would be 25 dollars. From that amount, 5 dollars goes to freelancer.com and 20 dollars goes to me. The same price would be for the second image. So, for both images, price would be 45 dollars (5 dollars to freelancer.com and 40 dollars for me). But first you need to see what I have done. When you see what I have and you confirm that it is OK, than I will edit my bid on 45 dollars. Hope to hear from you. Regards!
$100 USD 在4天之内
4.9 (17条评论)
4.3
4.3
用户头像
I work on vector drawing for 20 years. I also worked on CNC machines.I can Ideliver drawing in Corel Draw, Illustrator or AutoCAD.
$55 USD 在2天之内
4.6 (6条评论)
3.4
3.4
用户头像
Hi, I have read the project description and, I m the perfect match for this project. I am mechanical engineer having 8 years experiences in design field in various fields. Product design, Jig, Gauges, Trimming Die, stamping Die, Casting mould, Rubber mould, plant layout, Machine design, Interior design etc. Kindly assign the task to me. Will complete this project perfectly in on time. Please check my portfolio for the sample designs that had before. I, therefore, fervently pray and hope that you would be kind enough to consider my bid perfect for this project and provide me the details and allow me to add another project in my experience list. I am eagerly waiting for your positive response & more details Thank you Sincerely yours, BestTowards
$333 USD 在30天之内
5.0 (1条评论)
1.1
1.1
用户头像
dear sir. I have carefully considered your proposal. as you say, I think that I can complete it within 1~2 hours. But someone who can carry out your proposal would have skill on Photoshop and the knowledge of CNC plasma cutting. As an CAD/CAM expert, I am also working the job like your proposal as well as CNCmilling and turning. perhaps, you first make the completed image for CNC plasma, and then convert the image into dxf or dwg.(because some CNC device directly can cut from dxf or dwg without G-code) or and then generate G-code. I want to have a chat with you. I am interested in that you have a lot of projects. best regards xingde
$25 USD 在1天之内
5.0 (1条评论)
1.0
1.0
用户头像
Hello! I have been already work on plasma cutting machine SATRONIK LS 2500. I have programmed it and working on machine so I know how it need to bi done. I'm ready to start right now. Give me a chance to improve myself and contact me. Best regards!
$77 USD 在3天之内
0.0 (0条评论)
0.0
0.0

关于客户

TRINIDAD AND TOBAGO的国旗
Freeport, Trinidad and Tobago
5.0
83
付款方式已验证
会员自9月 2, 2013起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。