CLOSED LOOP WATER RECYCLING PLANT DESIGN (HEAVY VEHICLE WASH
$250-750 AUD
已完成
已发布超过 12 年前
$250-750 AUD
货到付款
To design a schematic, design brief and approximate plant cost of a closed loop water recycling plant with the following parameters:
• High levels of suspended solids and oils within the influent stream
• The system is to have a reclaim target of 75%, have provisions for mains water backup with minimal consumable costs
• The system is not permitted to discharge to any drains
• Low energy output
• Total approximate plant cost
• To adhere to mining environments
• Total water throughput per hour: 3000 litres per hour
• Total footprint size of 5m x 5m
Water quality effluent parameters:
• <10mg/L total oil and grease
• <10mg/L suspended solids
• <10 NTU turbidity
Water quality influent parameters
• 1000mg/L total oil and grease (average)
• 2000mg/L suspended solids (average)
The successful bidder will be asked to provide examples of previous projects or porfolio. Ongoing future work available for the right person.
We specialse in desalination/waste water treatment/industrial effleunts of various types,both mechanical and [login to view URL] can design and supply total recycling system for your car [login to view URL] is cheaper than paying for sewercharges/EPA.
$700 AUD 在15天之内
5.0 (1条评论)
3.7
3.7
5 freelancers are bidding on average $550 AUD for this job
We can provide the solution and present the project with an excellent format. I have design and installed cryogenic supply facilities and other supply circuits for various type of fluids.