Configure Server 2008 & Cisco RV042 Router for Site 2 Site VPN

Our configuration is as follows

Server A <-> INTERNET <-> RV042 <-> Server B, Client Computer A

Server A has:

PUBLIC IP Interface

8 Virtual Machines Running

DHCP for the 192.168.2.0 subnet (all VM's are assigned a 192.168.2.0 IP)

RV042 has:

PUBLIC IP Interface

192.168.10.1 gateway address

NAT (one to many)

Server B has:

HDCP for the 192.168.10.0 subnet (all Client computers are assigned a 192.168.10.0 IP)

The desired configuration is to establish a bi-directional site to site VPN and necessary static routes between RV042 & Server A so that traffic could flow freely between the 2 networks.

Signoff criteria is:

i. Allow Server A to ping Server B, Computer A

ii. Allow Computer A to ping Server A + 8 VMs

iii. Allow Server B to ping Server A + 8 VMs

You will be given full access to the entire network and the router via Teamviewer

A person familiar with routing, cisco devices and VPn setup should be able to do this in a matter of a couple of hours. We are lookign for someone who can start immediately

项目ID： #2771363

关于项目