Find Jobs
Hire Freelancers

Firmware debug

₹12500-37500 INR

已完成
已发布大约 6 年前

₹12500-37500 INR

货到付款
Version-1 of PCB+Firmware for assessing bioimpedance has been created, using AFE4300, ATMEL mc and C like coding. Impedance values are not consistently seen, they vary by many ohms. This needs to be understood and debugged. To do – 1. Validate existing calculations of segmental impedances in code. 2. Current implementation is using FWR mode for impedance measurement. Will change over to IQ mode make any difference? 3. For a constant resistor value, it would be a good idea to scope the SPI interface (DOUT) and check if the readings are reasonably stable 4. Since the body impedance measurements should not change much, it would help to get them to run the ADC at the lowest possible sample rates and check ? 5. Isolation - Check if the cables/connectors are thoroughly isolated from any nearby noise sources. 6. Establish differences in impedances when tested with electrodes made of different material - SS/Ag-coated SS. 7. Analog waveforms probably need to be studied to see signal integrity and to weed out noise. 8. Confirm frequencies to be used and help in derivation of various output vital stats. Of particular interest would be if Bone Mineral Content can be derived. 9. Study impact of electrode design, cable used, pressure applied on the impedance measurement to come up with a prescribed protocol. 10. Design a suitable simulator jig that can be used for calibration and testing.
项目 ID: 16277660

关于此项目

2提案
远程项目
活跃6 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
颁发给:
用户头像
Will fix all bugs in 10 days. https://udhbhava.in. Have worked in such projects before. Experts in embedded h/w and s/w
₹13,333 INR 在10天之内
4.6 (1条评论)
2.5
2.5
2威客以平均价₹20,555 INR来参与此工作竞价
用户头像
Senior ENGINEER has more of 40 years’ experience in this profession, developing Hardware and Software Expertise in video processing and associated simulation and evaluation tools and methods, communication I2C, I2S, SATA, RS232, RS422, RS485, USB, TCP, Bluetooth, RF433, Wi-fi, GSM, GPS, GPRS and any other serial communication. Producing Analog/Digital board designs, layouts and modifications or any other multi-layer PCB design, Verifying designs and layouts. Preparing documentation for manufacturing. Gerber, contact with partner in China for make PCB in 32 layers Develop Digital/Analogue electronic board architecture and design by developing product concept;
₹27,777 INR 在2天之内
4.9 (47条评论)
6.4
6.4

关于客户

INDIA的国旗
Bangalore, India
5.0
1
会员自1月 8, 2018起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。