High current switching circuit using MOSFET/IGBT

已完成 已发布的 5 年前 货到付款
已完成 货到付款

I'm working on a prototype of an Electric Bike. I am trying to use regenerative energy from the electric motor during freewheeling, to charge back the battery. I want this to be semi-automated and hence I'm looking for a MOSFET/IGBT based switching circuit to achieve the same. Below is the scenario and problem statement. Check the diagrams for reference

What I have:

1. 1000W E-bike controller with throttle

2. 48V Lead Acid battery

3. Buck/Boost regulator (currently set to 54V)

How things work:

When battery is connected to controller and throttle is engaged, the controller draws power from the battery and powers the motor

When I don't engage the throttle and the vehicle is still moving, there's "regenerative" voltage at the same terminals of the controller that are connected to the battery. This regenerative voltages varies with speed.

What I wish to achieve:

1. When I engage the throttle, power should be drawn from the battery and supplied to the controller i.e. Discharge mode ([login to view URL])

2. When I don't engage the throttle and the vehicle is still moving, the output of the controller should get connected to the input of the buck/boost regulator. Output of the booster connects to the battery so that battery can be charged i.e. Charge mode ([login to view URL])

The switch S1 will enable me to switch between charge and discharge (ofcourse that can also be automated, but that's the easy part for me). The diode on the charging leg side is added to ensure current flows only in one direction to the battery.

What I expect is:

1. Circuit diagram along with components list

2. Circuit tested using simulators and results shared. This to ensure that the designed circuit indeed works as expected

This is more like a hobby project as of now and also the design will be simplistic, hence the budget is very low.

电路设计 电气工程 电子 微控制器

项目ID: #17761253

关于项目

5个方案 远程项目 活跃的5 年前

授予:

Swargamteja

I had experience in switching topologies. I can do your project.

$35 USD 在3天内
(1条评论)
0.0

有5名威客正在参与此工作的竞标,均价$175/小时

engrzishansabir

We are in an era of “Technological Revolution” in each and every aspect of life due to the momentum of change. This growth has modernized the world in the way we think, live, work and interact. To stay ahead in the fas 更多

$590USD 在1天里
(9条评论)
3.5
samiahmetjunaid

hello we are professional engineers have good command on all subjects like Circuit Analysis and design, Digital logic design, electronics, Control Systems micro-processor systems, C programming. Assembly prog 更多

$30USD 在1天里
(3条评论)
2.8
deepak23nanda

Hi there I am an Electrical Engineer with expertise in matlab & simulink. As in your description you have a problem in switching for the regenerative braking and battery charging. I have expertise in ELECTRICAL DRIVES 更多

$100 USD 在5天内
(2条评论)
0.7
omkarkelkar09

i was alrady design a supercapacitor charger for e- bike, i was design a system for bldc motor of specification of 40v/20a current, inrush current 150 a and control the , voltage , current

$122 USD 在5天内
(0条评论)
0.0