Gyroscope mock

$250-750 USD

已关闭

已发布

超过 1 年前

$250-750 USD

货到付款

This project aims to control a Gyroscope, having motors in 3 axes. As the delivery of this work, I would like to obtain: - Complete technical drawing. - Arduino program, containing comments for understanding the flow. - List of recommended components, cables, boards, motors, other elements deemed necessary for future purchase. The idea is to have two Servo Motors and a DC motor. The DC motor in the center, axis C, image attached, being powered by a current that will pass through a Slip Ring Connector B. Such Slip Ring Connector turns from axis B, which represents the second servo motor, also powered by current that will pass through Slip Ring Connector A, coming from A. The DC motor will be activated as soon as the Arduino is connected to the power source. Servo motors will be driven clockwise and anti-clockwise according to 4 Push Buttons connected to Arduino Board. In the sequence of connections, we will basically have: - 4 Push Buttons - Arduino board - Slip Ring Connector A - Servo Motor A - Slip Ring Connector B - Servo Motor B - DC Motor When Push Button A1 is activated, Servo Motor A rotates clockwise, when Push Button A2 is activated, Servo Motor A will rotate anti-clockwise. When Push Button B1 is activated, Servo Motor B will rotate clockwise, when Push Button B2 is activated, Servo Motor B will rotate anti-clockwise. Motor rotation speeds should be set to constants, and clearly documented for easy updating. Base engines size: - A and B: 5V Servo Motor - C: 5V Micro DC Motor

Electronics

Microcontroller

Electrical Engineering

项目 ID: 35408738

关于此项目

20提案

远程项目

活跃1 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

20威客以平均价$520 USD来参与此工作竞价

@liveexperts123

Hi there,I'm biddin on your project "Gyroscope mock"Electrical Engineering, Electronics and Microcontroller This project aims to control a Gyroscope, having motors in 3 axes I have read your project description and i'm a Professional Engineer therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

$750 USD 在3天之内

4.8

(99条评论)

7.8

@umg536

Hi there, I'm bidding on your project "Gyroscope mock" Being a professional electrical engineer, I can do this project for you. please leave a message on my chat so we can discuss the budget and deadline of the project. Also, have a look at my profile for my reviews and portfolios. Thanks Note: This is not an automated bid and i'm ready to discuss your project right now. .. .

$750 USD 在3天之内

4.7

(10条评论)

5.9

@engrhassanwali

Hi! I have understood your requirements about your project with every detail of it. I am an Electrical Engineer with more than 7 years of experience in electronics, circuit design, PCB layout, Verilog, FPGA, Embedded systems, microcontrollers, Proteus, Arduino, ESP32, Raspberry pi, NB-IoT, MATLAB, PLC Design, Algorithm, and Product design. I can assure satisfactory work. I'll be glad to work with you. Thanks

$750 USD 在12天之内

4.8

(22条评论)

5.7

@ElektroNeo

Hi. Firstly I am free and I can start to work on this project now. I can show my works if you want. I am an experienced Embedded System Developer. I have more than 5 years of experience in Embedded C programming. Furthermore, I am writing code with explaining comments. So, next developer, or you can understand what I did on this project. It is not a limit, but I am mostly working with these microcontrollers and development boards; 1. STM32F1/F2/F3/F4 (STM32Cube IDE) 2. PIC12, PIC16, PIC18 (MPLAB X IDE, MicroC PRO for PIC) 3. ATmega, ATtiny (Microchip Studio) 4. ESP32 (ESP-IDF or Arduino) 5. Arduino I hope you will find me suitable for this project. Best regards.

$430 USD 在4天之内

5.0

(3条评论)

4.8

@HarimohanG

Good day, I have more than 30 years experience in servo motors and DC motor designing and would be the best fit for your project. Please share me more information about this project so that I can design it for you. I would like to have a thorough discussion on this project as there are certain suggestions from my side After dedicating more than 30 years to the electronics design and development, I am passionate in designing the best products Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, Servo Motors, DC Motor etc. And have worked on more than 20 design tools for designing and simulation purpose Some of the generic queries from my side are: 1. What is the application of this product? 2. What will be the ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? If you are someone who wants to benefit from my experience just message me Hi and I shall be there for you Regards Hari Mohan Engineering for one is magic for others

$500 USD 在2天之内

5.0

(3条评论)

4.8

@AmazingEngr76386

Technical drawing should include: - Connections between Arduino Board and Push Buttons - Connections between Arduino Board and Slip Ring Connector A and B - Connections between Slip Ring Connector A and B and Motors Arduino program should include: - Easy to understand comments - Code for controlling the motors based on the push buttons List of recommended components: - 4 Push Buttons - Arduino board - Slip Ring Connector A and B - 2 x 5V Servo Motors - 1 x 5V Micro DC Motor - Cables and other necessary components These are the elements to be delivered for this project. Thank you for your consideration.

$500 USD 在7天之内

4.9

(4条评论)

4.4

@farizaneeq12

Hello I am a mechanical engineer having over 4 years of experience in control systems, circuit analysis, micro-controllers, arduino programming, dnamic control, Electronic Design and prototyping, Embedded( PCB circuit design and Analysis), Network Automation, and vibrations. I will do your project efficiently and will deliver quality work within the deadline. I will be looking for a positive response from you Regards Fariz Aneeq

$500 USD 在7天之内

5.0

(8条评论)

4.3

@ozdemirmcihad

HELLO; I am working as a research and development manager in a private company. I have more than 5 years of experience in embedded system software and hardware. As for software, I am proficient in microcontrollers such as (*****STM32*****), MICROCHIP, NUVOTON,ARDUINO,ESP32,MSP430,RASPBERRY Pİ. I have experience in communication protocols such as CanBus, ModBus, RS232, RS485,SPI,I2C, TCP IP, Socket Communication. I am an expert in Altium and KiCad programs in hardware. I have read and understood your project. Please write to me for details.

$565 USD 在28天之内

4.6

(7条评论)

4.4

@alamineee

Hi, Dear Employer, Many thanks for choosing the freelancer platform and for perusing my proposition. I am an EEE Engineer with a Ph.D. background. I have read your project description, this is easy to understand for me, and I can do it correctly. I have done many similar projects before. I need to discuss your deadline and budget, and I would like to discuss them in my chatbox. So please give me a quick message for more discussion in my chatbox. Gratefulness, Al. A

$650 USD 在3天之内

5.0

(3条评论)

3.8

@hnutweblera

Hello there. Interesting your project and thank you for your posting job. As u can see my profile, I am senior embedded expert, so can help your project. Hope more discuss with you. Regards.

$700 USD 在7天之内

4.8

(3条评论)

3.4

@emannoua

As an Embedded systems Engineer with 5years experience in the field with very good knowledge on microcontrollers like esp32, arduino, stm32...etc, I also have experience in PCB design using Altium, kicad and Diptrace. I bid on your project because I have the expertise and experience in proteus and micro c to provide high quality work. I can achieve the results that you are asking for and test before delivering, I have all parts in stock for this. respond to the offer so that we can discuss details of your project. Thank you in advance. Best Regards.

$300 USD 在7天之内

5.0

(4条评论)

1.7

@inigoherrerag

⭐⭐⭐⭐⭐I am senior Firmware & PCB Design,Java, C#,and C++ Developer ⭐⭐⭐⭐⭐ Hello I am Inigo H. I've seriously read your post and I have understood what you need. I am sure that I can be the best developer who can perfectly complete your project. I am a senior Firmware developer with 15+years of experience. I have rich experience in firmware development with ESP32 ,STM,ARDUINO,RSPBERRY and PIC,PLC,FPGA,etc. I also have rich experience GPRS, GPS, SMS, IoT I also have rich experience PCB Design. I have also rich experience C#,C++,QT,Java programming I have completed 100+ Projects over Freelancer with all 5 Star rating...without letting down a single Client....As Many Clients are still in touch based on my Working strategies and their satisfaction on their all previous Projects. I think it is necessary to discuss further over chat. Best Regards !

$500 USD 在7天之内

5.0

(1条评论)

1.4

@rachidSoussi

Hey there , My name is Rachid, I am an electronic developer with experience in developing complete electronic products, including electrical schematic design, PCB design, firmware development, testing, etc., I can start working immediately and can help you with development of a perfect project just message me to discuss details and let's get started.

$300 USD 在7天之内

5.0

(2条评论)

1.0

@ghayasa727

I have seen the details and I am electrical engineer and have experience in microcontroller, Arduino, ESP32, ESP8266, Raspberry pi, PCB Layout, circuit designs. Inbox me for further details as I need to ask some questions

$500 USD 在8天之内