Find Jobs
Hire Freelancers

New product (hardware+firmware) based on an existing product

$5-30 USD / hour

已完成
已发布大约 4 年前

$5-30 USD / hour

Deliverable: functional prototype with design files (Kicad schematics, Kicad PCB file, Gerber files, BOM, source code, binary) Scope: inclusion of current sensor to a load control device Description: We have an old product that uses a relay to connect/disconnect an external load. It receives commands from a bus using a proprietary protocol. We need to add a current sensor to this product. Architecture: the existing product is based on a PIC12F1840 programmed with Assembly language. We would like to update the microcontroller to STM32F070F6 and the programming language to ANSI C. So the job consists of replacing the MCU and adapting the code to the new platform while adding the ACS712 current sensor and the code needed for it to deliver an accurate measurement. We already have an enclosure for the product, so board dimensions should not change: 40x50x25 mm. The code for the proprietary protocol will be supplied in ANSI C.
项目 ID: 23493693

关于此项目

15提案
远程项目
活跃4 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
颁发给:
用户头像
I can do this nicely for you. Have been working dedicatedly on STM32Fxxx series since last 4 years beside having programming skills in C for over 25 years. Very good understanding of both Analog and Digital designs. Let's have a discussion so that I can share more details about my skills and plan. I have been working on industrial designs from concept to final product realization. Thanks for your time and I look forward to hearing from you. Best Regards ... Roy
$25 USD 在40天之内
5.0 (70条评论)
6.4
6.4
15威客以平均价$21 USD/小时来参与此工作竞价
用户头像
Hello sir, I have experience in designing electronics circuits and can program all kinds of microcontrollers. You can discuss your project with me in chat and we can move on right away. Thank you.
$20 USD 在40天之内
4.8 (53条评论)
6.8
6.8
用户头像
We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • Multisim • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards. Also we have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.
$18 USD 在40天之内
4.6 (34条评论)
5.6
5.6
用户头像
Hello, how are you? I hope you have a bright day/evening from your side. I have read the details provided, but please contact me so that we can discuss more on the project. I believe I have the required skills in this case
$18 USD 在20天之内
3.3 (18条评论)
5.4
5.4
用户头像
Hi Lets get directly into details I have worries about board size if the current you sense is too high you will need large pads or connectors which will consume large area or your already small PCB. Everything else is ok for me for now. About me I’m an embedded hardware engineer with over 18 years in Micro-controllers firmware development and PCB design. Proficient at all stages of design from prototyping till DFM / DFA / DFT production cycle. I can easily reverse the pic12F1840 code and rewrite it for STM32f070 along with analog ADC interface for ACS712 I invite you to chat to discuss further details.
$20 USD 在20天之内
5.0 (4条评论)
3.6
3.6
用户头像
Sir, I have read your requirements and would like to inform you that I and my team can easily handle your task also we have some sample projects to showcase our previous projects. We do not charge anything until giving you some successful results, no token money will be asked from our side. We guarantee you the best quality of work and timely service.
$18 USD 在40天之内
4.7 (16条评论)
2.7
2.7
用户头像
Hi there I’ve done a similar job, if you can come to chat i can show you some of my previous work as reference. I am an expert in this area and want to discuss the project further with you. I have experience in this job, and i can complete this job, waiting for a reply from your side thanks.
$12 USD 在40天之内
3.4 (8条评论)
4.0
4.0
用户头像
Hi, Worked on similar project and can do it. Please provide more details like operating current, voltage, load type etc. My experience, nut not limited to - Involved in designing, coding, testing and implementation of embedded systems project(s) Programming in C, Assembly Technologies: Languages -- C, Assembly Cross Compilers -- Keil ARM, Keil C51, GNU gcc ARM, STVD Cosmic, IAR 8051, MPLAB Hi-Tech C, Eclipse based IDE(s) Micro-controllers -- AT91RM9200, LPC2148, LPC1114, LPC1788, LPC4088, STM32F03, STM32F103, STM32F429, STM32F746, STM32W108, CC2538, CC2530, STM8S003, PIC12F1840, PIC16F84, PIC16F877A, PIC18F450, P89V51RD2, AT89C51, AT89S51 Architectures -- Cortex M0, M3, M4, M7, ARM 7, ARM 9, PIC 12, 16, 18, STM8, 8051 Debugger -- Lauterbach Trace32, JTAG J-link, ST-Link, PIC-KIT 3, GNU gdb Code Management -- PVCS, CVS, git, SVN Protocols -- UART, I2C, SPI, RS485 PCB -- Kicad, Eagle OS -Linux, Linux Internals, Linux device drivers Thanks, Milind
$22 USD 在30天之内
5.0 (1条评论)
2.6
2.6
用户头像
Hello I have a big experience in development and migration different embedded system. I am ready to discuss our collaboration.
$25 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
Dear sir. I am a senior Microcontroller developer and electronic engineer. I have read your description carefully and I am interested in your project. I have developed the PIC , AVR, STM, ARM, DSP, FPGA firmware and Arduino, Raspberry pi and I have designed the PCB using Kicad, Altium Designer, Eagle. For this project, I can develop the firmware and PCB and if necessary, I can manufacture the PCB. Please contact me, I can start working immediately and I will finish the project asap. I hope we can discuss more details via a private chatting. I am looking forward to your reply. Best regards
$15 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
I would like to work on the project, I have designed PCB boards for STM32 microcontrollers and good with programming. Kindly provide me with more information and would be glad to work on this project.
$18 USD 在40天之内
0.0 (0条评论)
0.0
0.0

关于客户

BRAZIL的国旗
Timbo, Brazil
4.4
3
付款方式已验证
会员自1月 21, 2020起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。