Find Jobs
Hire Freelancers

pcb develop base on SoC kitin970

$750-1500 USD

已关闭
已发布超过 4 年前

$750-1500 USD

货到付款
pcb design system on module SoM based on SoC Kirin970
项目 ID: 21390399

关于此项目

15提案
远程项目
活跃4 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
15威客以平均价$1,093 USD来参与此工作竞价
用户头像
Hi I am experienced PCB designer with more than 9 years of experience. I can do it for you. I have completed over 200 projects here. Please get in touch to discuss it further. I am waiting for your reply to start regards
$1,125 USD 在7天之内
4.8 (274条评论)
8.0
8.0
用户头像
Hello I have seven years of professional PCB designing experience. I am a full-time freelancer /Contractor. I can do this job in Altium. I hope you will hire me. Regards Engineer humza
$750 USD 在10天之内
4.9 (87条评论)
7.4
7.4
用户头像
Hello, I have read your hikey970 schematics attachment. Based from your description, looks like you're going to design a daughter board based on Hikey970, right? Let me know your detailed description over chat. I will help you design the boards. I have 8 years PCB design experience. I'm familiar with High speed digital Design, that might be used lot on daughter board like this(CMIW). Let's discuss the details. Best Regards, Rijal
$1,100 USD 在10天之内
4.6 (154条评论)
7.4
7.4
用户头像
Profile : ---------- over 15 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs, signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation. Educational Background : ------------------------ Bachelor Degree in Electronics & Communication Engineering Layout tool supported : ----------------------- PADS Layout 9.5 (Basic) Pads VX2.1 standard ORCAD PCB Designer 16.6 ORCAD PCB Designer 17.2 Pulsonix 10.0 Eagle Kicad Schematic tool supported : -------------------------- Orcad Capture 17.2 Pads Dxdesigner VX2.1 standard Pulsonix 10.0 Eagle Kicad Services Offered : ------------------ Footprint Creation. Netlist Import, DXF Import, Place, Route ,Gerbers and TQ closure. PCB Layout Review. Minimum Required Inputs : ------------------------- A top - level functional block diagram Schematic Netlsit BOM Mechanicals Impedance Information Current Consumption on each voltage rail. Target fabrication house - capability report
$1,500 USD 在15天之内
5.0 (51条评论)
6.5
6.5
用户头像
Hi I am interested to your project. I am familiar with electronics, microcontroller as well as PCB design by Eagle. Thanks.
$1,500 USD 在35天之内
4.9 (99条评论)
6.4
6.4
用户头像
We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards.
$1,125 USD 在7天之内
4.6 (61条评论)
6.1
6.1
用户头像
Hi Good day! This is Lawrence and I'm an experienced in designing SoC motherboards. I could support you on the circuit, PCB layout and other electronic stuffs. Please contact me anytime to discuss more about this project. Thanks, Lawrence
$750 USD 在14天之内
5.0 (10条评论)
5.8
5.8
用户头像
Hello, i have read the details provided..please contact me to discuss more on the project deadline and some other few things
$750 USD 在7天之内
4.4 (18条评论)
5.3
5.3
用户头像
Здравствуйте, не хватает информации по распиновке самого чипсета. Какие интерфейсы должны быть выведены, в каком форм-факторе должен быть сделан модуль?
$1,125 USD 在7天之内
5.0 (4条评论)
4.8
4.8
用户头像
Hi. I checked your pdf. I am very interested in your project. i have rich experience on PCB design and firmware programming. I think this project is very suitable for me and i am sure i can give you good result . If you award me for your project, you will get good result . please call me.
$750 USD 在7天之内
4.8 (3条评论)
4.6
4.6
用户头像
hi.. i can do this one i use KiCad for PCB designing, i hope it won't be a problem for you ....so please check my profile for more details..
$750 USD 在20天之内
4.9 (9条评论)
4.1
4.1
用户头像
How are you? I am a Senior Electronics and Embedded Engineer with the areas of expertise in Home Automation System and Embedded System, product prototyping, Schematic & PCB design and firmware development for systems. As I'm a Master of Computer Science, I have 10+ years of experience in technical projects, project leader including Industrial process control etc. - Microcontroller programming using STM32WB/STM32, ESP32/ESP8266, Arduino, BLE/Bluetooth, WiFi, Ethernet, Zig-bee, GSM/GPS/GPRS/GNSS, Z-Wave - Various LCDs & Sensors, I2C/I2S/SPI, RS232/485 - various PLC & HMI programming such as ADAM, Siemens, Delta, Mitsubishi - Various Servo/Motor control - Windows application & Algorithm development using UWP, C#, C/C++ - Circuit & Schematic & PCB design - Mobile app development for the Hardware So, I can take your project from concept to finished product. I will try my best to complete your projects asap, and I will provide the best services with the high quality. Thanks.
$800 USD 在6天之内
4.7 (4条评论)
3.0
3.0
用户头像
I had been working in UTStarcom, Huawei, Kodak and GE for many years. I have experience and deeply knowledge in embedded computer hardware and software. Right now I own a samll company in Shanghai , China to provide design service worldwide. Take a look into my portfolio pages and contact me if you want a design partner in China.
$1,125 USD 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello I checked to attach a file, your goal is clear. I’m ready to do your project right now as fast / carefully as you want. I had got this experience and have many samples to show you. Best regards
$750 USD 在5天之内
0.0 (0条评论)
0.0
0.0

关于客户

UKRAINE的国旗
Kyiv, Ukraine
0.0
0
会员自9月 21, 2019起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。