Casings design for hardware network appliances
$30-250 USD
货到付款
We need several clever designs for the casings of hardware network appliances.
They all must be the exact same shapes and sizes, as seen from the outside.
All modules must interconnect with similar devices, just by stacking them on top of each other, so the top and bottom need to have:
* 2 power contacts
* 4 (smaller) data contacts
Also, on the bottom, there must be a QR pattern for identification.
Apart from that, the modules must also have:
Module 1: A processing unit & wireless router. It hosts a raspberry pi-like SBC inside. It has some distinguishing characteristics:
Ports & buttons:
* A micro-usb port, for power, on the side
* An ethernet port
* A reset button
Status leds
* power led
* wired connection to the internet
* wireless AP status
* wired connection status with similar modules
Module 2: A storage unit. It must host 2x2.5 inch (100 x 70 x 10 mm) hard disks, and a raspberry pi - like SBC, stripped of the large ports (so it isn’t that thick - no usb, no RJ-45, etc). It needs:
Status leds
* power led
* wired connection status with similar modules
* simple available space view
* disks health (they will be redundant)
Module 3: A power unit. It must host a battery pack and a raspberry pi - like SBC. It needs:
Ports and buttons
* A micro-usb port, for power, on the side
Status leds
* power led
* consumers status (load status)
* power status with different icons for charging / discharging
What is to be delivered:
* beautiful design with individual modules, different viewing angles
* beautiful design with stacked modules, different viewing angles
* hardware specs (sizes / materials / colors) so that the design can be printed.
项目ID: #11038142
关于项目
有20名威客正在参与此工作的竞标,均价$132/小时
Hello, My name is Federico González Bosque and i'm an Industrial Designer and I have 12 years of experience in design new products for American and European market. If you need make a competitive and innovative pro 更多
Hi, Please give me opportunity to work for you in 3D and 2D.I have well experience in this field of 5+ years. I have expertise in in 3D and 2D. There will be no delay in my work I have read your project descript 更多
Hi, I just went through your job description and ready to start work now and will provide you first draft as soon as possible. Please visit my profile page https://www.freelancer.com/u/eyenetindia.html to check m 更多
Hello, Dear: my name is Hamada Elmisy and I am a mechanical engineer. I am an expert in solidworks and AutoCAD. I am a certified at solidworks with 3 years of design experience. I designed more complicated proje 更多