Freelancer标志它是如何运作的 浏览工作
登录 注册
发布项目
个人资料封面照片
您正在关注
关注用户错误。
该用户不允许他人关注他们。
您已经关注了这个用户。
您的会员计划仅允许0个关注。升级在此。
成功取消关注
取消关注用户错误
您已成功推荐
推荐用户错误。
出问题了，请刷新页面并重新尝试。
电子邮箱已成功验证。
用户头像
$10 USD / 小时
KENYA的国旗
nairobi, kenya
$10 USD / 小时
目前这里是10:47 下午
八月 17, 2018已加入
0 推荐

Morris K.

@automorris

 0.0 (0条评论)
0.0
0.0
0%
0%
$10 USD / 小时
KENYA的国旗
nairobi, kenya
$10 USD / 小时
不适用
工作已完成
不适用
在预算内
不适用
按时
不适用
重复雇用率

Mechatronics Design Engineer

Am a Solidworks designer and Solidcam CNC programmer. My scope of work is on CAD design, FEA analysis and CNC programming. 3 years of experience in designing customers products. My main aim is to offer the best design solutions to various engineering problems. Looking forward to work on challenging design problems.
Freelancer Engineers Kenya
查看所有Engineers在Kenya

联系Morris K.询问您的工作详情

登录并通过聊天讨论所有细节。

文件夹

9389303
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
9389155
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
9157556
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
9057919
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
8791006
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
9041090
This is a five cylinder intake manifold having five runners. The design idea is such that the runners, the plenum are separate entities thus easier to machine. The plenum has two sections, the upper and the lower. The runners have incorporated fuel injector ports for a better design. The intake manifold is suitable to any throttle body the client has. Depending on the throttle body,an additional spacer plate can be machined to couple the intake manifold and the throttle body
Intake Manifold
9389303
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
9389155
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
9157556
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
9057919
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
8791006
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
9041090
This is a five cylinder intake manifold having five runners. The design idea is such that the runners, the plenum are separate entities thus easier to machine. The plenum has two sections, the upper and the lower. The runners have incorporated fuel injector ports for a better design. The intake manifold is suitable to any throttle body the client has. Depending on the throttle body,an additional spacer plate can be machined to couple the intake manifold and the throttle body
Intake Manifold

评论

变更已保存
这里没有评论！

经验

CAD Designer & CNC Machinist

Kens Metal
2月 2022 - 9月 2022 (7 个月, 3 天)
My role here included designing customer's designs, nesting the drawings for laser cutting and cnc water jet cutting. I also did the actual cutting on either the fiber laser cnc machine or water jet cnc machine

教育

Bachelors Degree Mechatronics Engineering

Jomo Kenyatta University of Agriculture and Technology, Kenya 2016 - 2021
(5 年)

资质

Bachelors Degree in Mechatronics Engineering

Jomo Kenyatta University of Science and Technology
2016
Graduated with a second class lower division. I worked on several projects while at school which helped me build up my skills in CAD design.

联系Morris K.询问您的工作详情

登录并通过聊天讨论所有细节。

认证

优选威客
身份已验证
支付已验证
电话已验证
邮箱已验证
Facebook已关联

顶级技能

Engineering
CAD/CAM
Manufacturing
3D Rendering
Solidworks

浏览相似威客

Engineers in Kenya
Engineers
CAD/CAM Designers
Manufacturing Experts

浏览相似作品

Engineering
CAD/CAM
Manufacturing
3D Rendering
之前的用户 下一个用户
邀请已发送成功！
谢谢！我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
Freelancer标志 Hong Kong / 中文(简体) 帮助和支持 威客分类项目竞赛威客企业会员优选威客计划项目管理本地工作Photo Anywhere 作品展示开发人员API获得认证桌面APP 关于关于我们如何运作安全投资方网站地图故事消息团队奖励新闻发布职业 条款隐私政策条款和条件版权政策行为准则费用及收费合伙人Escrow.comLoadshiftWarrior Forum 应用程序苹果APP商城图标Google Play标志
复制到剪切板失败，请修改权限后重试。
复制到剪贴板。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出，请再次登录。