Cisco 1941W + Embedded AP config

Need complete config from blank router (post erase) for cisco 1941W router with ADSL EHWIC and also for embedded AP. Specifics: interface Dialer1 pppoe connection PAP CHAP PVC 8/35 Int Gi0/0 will connect to a Cisco SG300-10MP small business switch Int Gi0/1 will connect to a NAS with a static assigned ip address AP to have 4 WiFi SSIDs: [VLAN 1: 624 (for 2.4GHz) & 65 (for 5GHz)] - this is the home network and will share VLAN1 with the Gi0/0 and Gi0/1 (including the switch on 0 and the NAs on 1) [VLAN 2: G24 (for 2.4GHz) & G5 (for 5GHz)] - this is the guest network and will only give access to the internet and not devices in VLAN 1 Attached are network diagrams. Would like to have configured before 25th December. Current 877W is on the way out. Want complete config script so I can paste it in line by line including basic router config and embedded ap config. Ehere passwords should be assigned use XXXXXXX in place of password and comment out instructions on password commands. Contact for further info.