Code and wiring diagrams for a toy laser gun with two speakers, LCD display and a series of LED's.

$250-750 USD

已关闭

已发布

超过 9 年前

$250-750 USD

货到付款

I have obtained a list of video guides and some test code associated with the design which I can provide. I am looking for the code to be written so I can copy and synch with my own Arduino devices. The design needs to be compatible with the Arduino Micro and will needs to include 2 small speakers (sound of the laser gun), a small LCD which displays a booting screen and battery power and counter (battery power will be Li ion battery), a 6 LED display synched with the LCD counter (basic concept is the laser gun will have 12 shots which will display on the LCD counter, as 2 shots are fired the counter will go down from 12 to 10 and 1 LED will go out to represent a decrease in ammunition) a 10 LED chaser (to be used on the side of the rail of the laser gun to give a ray gun effect), and a large central LED that flashes in time with the 10 LED chase (this will flash red for firing and blue for the stun setting). I will also need one small blue led attached to a selector switch to change from Red laser gun to Blue Stun gun.

Arduino

项目 ID: 6352780

关于此项目

15提案

远程项目

活跃10 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

15威客以平均价$722 USD来参与此工作竞价

@tifoda

Hello. Im designing different electronics devices, mostly based on avr, arm MCUs and boards with them like arduino, stm-discovery etc. I can help you with your deal and since im new one here I can do it cheaper then anybody. I have done a whole lasertag system with different "types of damage" for different "types of troops" and teams and many-many other in my place. But not with arduino. I can use it, but only for simple projects. Easier to do with direct MCU programming here.

$555 USD 在30天之内

5.0

(54条评论)

6.8

@MikroStar

hi, i am an electrical engineer. i have expertise in embedded system design.i can help you with this project. Please check my profile for my previous work experiences. let me know if you are interested in the bid so we can discuss the details further. regards

$2,500 USD 在13天之内

4.9

(11条评论)

6.2

@ahmedmohamed85

A proposal has not yet been provided

$555 USD 在10天之内

4.9

(15条评论)

5.1

@botzindia

Hi, We are a team of electronics&embedded engineer with more than 10 years of experience in designing and developing various digital and embedded systems... We have done a lot of projects in Arduino. Also we conduct many workshops on Arduino..As a part of our training program we developed Arduino/PIC based Programming boards and driver boards for sensors. Since we help engineering students to complete their academic projects, we have experienced with a lot of sensors, components, PCBs etc. So we can assure you that this project can be done 100%perfect....:-) Please check our completed projects...:-) Kindly let us know more details about this project and we can complete it together...:-) Thank You

$777 USD 在10天之内

4.9

(9条评论)

4.4

@ElectroStrom

I am an embedded programmer with 4 years of experience. I have worked with arduino. I can provide you with this code and help you in setting up the hardware. please contact me to discuss details

$250 USD 在7天之内

5.0

(5条评论)

4.2

@LuisMa

I have working with Arduino projects the last four years. The type of work described by you is within my skills. I am very interested to assist you in your development needs.

$555 USD 在10天之内

5.0

(2条评论)

4.2

@Gippopotam

Hello! I have experience programming in C / C + + for almost 20 years. Devices based on Arduino, I'm doing more than 3 years. I have experience making "smart house" on the Arduino. More, I have experience in: - building hydroponics installations on Arduino - the control system with LED lights - equipment for the reality-show "Treasure Room" (complete within 3 days) - Control system for printing equipment (now in progress). I am ready to write a program for Arduino and provide a complete description of the device.

$300 USD 在10天之内

4.6

(11条评论)

4.1

@hainraja

Hi, I have worked on several projects using Raspberry Pi/Arduino boards. This one looks like simulation of a gun toy using light and sound. We can easily do this. As there are 20 I/O pins with Arudino micro, we won't any problem with connecting LEDs and speaker and LCD. If we are running out of ports, then we need to looks for shift register for LED chaser that will reduce GPIO pinouts. Thanks!

$630 USD 在10天之内

4.7

(7条评论)

3.7

@sastrarobotics

We can do this project for you with all the requirements enlisted within the said timeframe. Hoping to work with you!

$666 USD 在10天之内

0.0

(0条评论)

0.0

@VertexMemphis

Hi there! My name is Keith and I am a professional electrical engineer here in the US. I now work solely as a contracting designer and freelancer. I am knowledgable in all sorts of microcontroller implementations, circuit design, embedded systems, mechanical systems, PLCs and more. Concerning your UAV/quadcopter project, I have a great deal of knowledge in multicopters, from programming ardupilot mega's, and all custom builds in between. I built an aerial photography business as one point. I always enjoy the opportunity to work on such a variety of interesting projects through consulting work and I invite you to have a look at my resume and portfolio. I am hardworking and understand that when all is said and done, my clients need a product that works well and done direct to your specification and wants. Thank you for considering! And please don’t hesitate to contact me further. - Keith B.

$1,111 USD 在21天之内