Arduino ESP32 WiFi module firmware engineer

Hi There, I am Shahbaz Ali, representing I-TECH. We will help you to build your project. Please feel free to contact us. Best Regards, Shahbaz.

Hi there I am an electrical engineer with 2+ years of experience related to ESP32. I can do this project for you. Let me know if you are interested we can discuss further on chat.

Dear Sir, I am an expert with more than 15 years of experience in Firmware development, prototyping and PCB Layouts. I have worked alot with ESP32. I assure you the best solution for your work. Regards Ch

hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 8 years in arduino and electronics,i can make to u whatever u need using ESP32 board as i have experience with it an dalready have it here on my bench

Hello, Deep is here from India. I have experience with ESP32 Firmware development using Arduino IDE. I can help you for your development.

Hello I'm an electronics engineer with 10+ years of experience including Arduino, ESP, STM, and Raspberry. Please tell me more about your project. Best regards, Dennis

Hello If you have no problem with my Bid , please mention the details of the project also is it ESP-IDF or Arduino-Core based ? Firmware usually means ESP-IDF , but just for the sake of clarity I'm asking . Another very important thing is the Sensors/Peripherals used , So I can be sure if they are available or not in my area . Regards

Hello, i have read the details provided..please contact me to discuss more on the project deadline and some other few things

Hello Sir I am a Mechatronics engineer and I have a lot of experience dealing with these things like esp32. I will definitely deliver your work on time and I will be pleased to do your project in a reasonable budget. Thank you

Hello! Nice to meet you! I have read your project carefully. I am very interested in your project. I am a Microelectronics engineering expert. I have a lot of experience on ARM, FPGA, DSP, Arduino, Raspberry, PLC, PIC, ATMega and so on. I can do help you. And I hope to cooperate with you. Tell me your opinion. My regards.

Hi, I am an embedded software engineer, I can help you with outsourcing IoT software. I am familiar with Arduino and ESP32. Can we have a chat? Bests, Piotr

I am an electronics design engineer with More than 2 Years of Experiance. I have design expertise in Embedded systems, Schematic design, PCB layout ,Hardware Debugging and hardware prototyping. I also have experience in designing Internet of Things,and Circuit design.

Hi. I have experience with esp32 based systems. I have recently completely IoT gateway project used for employee tracking system which has low power wireless design using nrf52840 and esp32. We can finalize timelines and costs once we discuss the project details. Having a 4 years experience, I am comfortable handling any microcontroller and sensor, PCB design and programming. I have a lot of projects to show you, just ping me. Regards,

How are you? I am a Senior Electronics and Embedded Engineer with the areas of expertise in Home Automation System and Embedded System, product prototyping, Schematic & PCB design and firmware development for systems. As I'm a Master of Computer Science, I have 10+ years of experience in technical projects, project leader including Industrial process control etc. - Microcontroller programming using STM32WB/STM32, ESP32/ESP8266, Arduino, BLE/Bluetooth, WiFi, Ethernet, Zig-bee, GSM/GPS/GPRS/GNSS, Z-Wave - Various LCDs & Sensors, I2C/I2S/SPI, RS232/485 - various PLC & HMI programming such as ADAM, Siemens, Delta, Mitsubishi - Various Servo/Motor control - Windows application & Algorithm development using UWP, C#, C/C++ - Circuit & Schematic & PCB design - Mobile app development for the Hardware So, I can take your project from concept to finished product. I will try my best to complete your projects asap, and I will provide the best services with the high quality. Thanks.

https://www.freelancer.com/projects/c-programming/Automa-ESP https://www.freelancer.com/projects/amazon-web-services/AWS-IOT-rule-sending-data doing the same projects lets discuss

Hi. I am an esp32 expert. My last big project was building a bunch of carnival games for nerf using custom esp32 boards and raspberry pis. please tell me more about your project.

I'm an electronic engineer with more than 15 years of work experience. I work as HW designer; FW and SW developer. As HW designer, I work in Altium, KiCad and Orcad and I have experience in development single MCU (Microchip PIC and ARM Cortex) boards with several digital I/O (GPIO, UART, SPI, I2C, PWM,....) and some analog I/O. I design complete board: power section, MCU section, peripheral section,.... I design also boards with battery power; so I have experience in low power PCB design. I have also experience in commercial boards (Arduino, Raspberry, Beaglebone,...) shields design. I have also experience in bluetooth (both 2.0 and 4.0) PCB design. As FW developer, usually I work in C for Microchip PIC (MPLAB X + XC compilers) and Eclipse + GNU ARM for different ARM Cortex M3/M4 manufacturers (STM32Fx, NXP, EFM32 SiLabs, but I'm ready to learn new frameworks). I work with both single task and multi task environment (FreeRTOS and RTX). I write code both for low level driver (GPIO, UART, SPI, I2C, PWM....) management, for high level/final application, for bootloader and for OTA. I work also in "C code" commercial boards Arduino/ESP32/ESP8266 and Linux embedded commercial boards (Raspberry and Beaglebone). I have also experience in bluetooth (both 2.0 and 4.0) programming. As SW developer, I work in C, C++, .NET, Java, and lot of others programming languages. Mainly I work for Windows O.S., but I have experience in Linux development too.

Hi i am an experienced electrical engineer. i have been working on IOT and arduino from last 3 to 4 years and i can provide help in this project. Trying to get my first task here ,i hope we can work together if you will consider me for this task.

I am working as a firmware engineer for a company that supplies IoT solutions. We are using ESP32 frequently. I have whole features of it. I have also used arduino in many projects. I believe that I can support your project with success.

Hi I have 10+ years of experience in embedded firmware engineering .I am good at •Architecting, Designing, Developing, Testing of real time embedded products •Development of complete firmware/drivers/chip architecture/chip top level design(digital side) from scratch for an ASIC •Managing teams ( development as well as QA, technical guidance cum leadership ) for any embedded product/ASIC My expertise :- Operating Systems/Schedulers:- freeRtos, Linux ,Ecos, Greenhills UVelocity VxWorks, WindowsDDK, Event Based/Message based schedulers, Micro controllers :- ARM 7TDMI , ARM Cortex -M3/M4 , ARC, 8051,STM32Fx... , Freescale MPC512x Host Interfaces :- UART, SPI, I2C, SDIO , PCI , MiniPCI , Cardbus Languages:- C, C++ Configuration tools:- Git ,CVS Environments:- RVDS ARM simulator, GCC ARM , GCC 8051(SDCC), ATmelstudio 6, ARC simulator, gcc-cygwin SDKs( boards ):- Rasberry Pi, ESP WROOM 02, STM3240G-EVAL, Atmel SAM4s , Atmel D20/21, Renesas S7G2 , Anaren(rezolt) Em-fi kit (STM32F205 MCU), Anaren FA2/FA3 cellular platform (STM32F205 MCU), Nordic NRFgo mother kit , Gainspan GS1011 , Let us discuss if you find my expertise suits to your requirement. To gain mutual confidence , let me work with task wise. --venu