Embedded Coder experienced in TI Micro\Dsp and CCS programmer

$15-25 USD / hour

已关闭

已发布

超过 7 年前

$15-25 USD / hour

Embedded developer expert : ========================== Well experience in TI Micro or DSP configuration I2C SPI FLASH ADC DMA DTOA Lot of experience of writing drivers in micro to sensors such as SPI driver to cellular modem,Relays,Leds,analysing sinus value from analog input,develop I2C driver between 2 micro,Uart driver to PC,modbus driver driver to spi SD , SPI flash ,any memory ,DMA configuration ,timers in micro and etc.. -Best Advantage TMS320C5535 (5515) -Advantage as meny as TI microcontroller Programmer who capable to start with: Take the example the TMS320C5535 ezdsp USB KIT Load demo project to IDE + Understand good CCS and it configuration how u load the demo project? what does the demo project does? how the SPI flash driver work? All is ready CCS board and the info in WEB -Base on SPI flash given u should write a driver that do not block the main program -Connected and work online with teamviewer on our board we are flexible in the hours and timers about 80 hours a month (Also can be up to 180 hours a month )

Assembly

C Programming

Electrical Engineering

Embedded Software

Microcontroller

项目 ID: 12903139

关于此项目

7提案

远程项目

活跃7 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

7威客以平均价$23 USD/小时来参与此工作竞价

@sagradoamicus

hi sir i am an expert electronics engineer I can do it for you I have more than 8 years of experience in this field. please get in contact to discuss it further I am waiting for your reply to start Regards

$21 USD 在20天之内

4.9

(225条评论)

7.8

@seshupower

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, EEprom. Protocols for networking, wi-Fi routers. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.

$22 USD 在40天之内

4.9

(58条评论)

6.7

@prashushinde9

Hello, I want to show you all relevant Demo and Designs which is similar to your project completed previously. To make sure about the requirement set and customization, I want to discuss this project with you further on personal chat. Let me know the best suitable time for you to schedule the meeting, Feel free to message me at any time, I use to be online 24x7 on Freelancer so probably you will get a quick response from my end.

$23 USD 在40天之内

5.0

(1条评论)

3.0

@adipdutt

I am working with TI DSPs since 2003 (lots of problem with compilers at that time ) anyway, slowly gone through their OMAP series, this is along with other devices from ADI and ST. Please go through my profile if you are interested. Most of my work were for Defense,however I have worked for commercial and industrial devices. I am not a fast 'c' coder but due to my vast personal libraries and hardware-software co-design experience it makes realizing products easier. Most of my projects are without OS, as they are REAL real time, so most of things were built from grounds up with the help of TI. If RTOS required I use my colleagues to look into the porting part and handle the driver/kernel details All exciting kind of communication interface. Variable frequency drive Image and pattern recognition for security Bio-medical USG scanner (+FPGAs) Railway crack detection. This are a few examples in commercial domain I can mention. Thanks Adip

$22 USD 在30天之内