dsPIC family programming (signal filters using FIR ad IIR techniques)

£250-750 GBP

已关闭

已发布

超过 4 年前

£250-750 GBP

货到付款

I need an expert who knows how to program a dsPIC micro processor to test its limits. Need someone who understands FIR and IIR signal filtering techniques. Codes need to be done using either C or Assembly language 2 tasks in total. TASK 1 = to complete a simple pass through code/program the passes a signal through the board (and chip) and outputs it to an oscilloscope. ( i have a code ready but the code requires modifications due to its limitations) TASK 2 = to implement IIR & FIR filters in the "task 1" code/program Matlab / Simulink could be used to design the filters but this need to be implemented/tested on the PIC chip for testing purposes. Frequency and amplitude should be easily changeable so that the frequency sweeps and get a quick idea of the frequency response of the filter in no time at all. Aim of the project is not to filter some complicated signals but rather to see what are the capabilities of the PIC and whether we can make some use of the special features of dsPIC (MAC unit?). To re iterate, our filter should be as generic as possible, i.e. we should be able to quickly redesign the filter and run it, using the same code (just changing the coefficients). ULTIMATELY, the final code/codes/programs will need to be as generic as possible so that it is capable of implementing any type of FIR/IIR filter. I WILL PROVIDE ALL DATASHEETS, INSTRUCTIONS, AND SCHEMATICS OF ALL EQUIPMENT I HAVE

Electrical Engineering

项目 ID: 23617272

关于此项目

21提案

远程项目

活跃4 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

21威客以平均价£518 GBP来参与此工作竞价

@ahmedmohamed85

Dear sir I have more than 10 years experience in in embedded systems design and DSP design I have implemented several dsp algorithms on microprocessors Including filter design and FFT, please message me so that we can discuss Best regards

£388 GBP 在5天之内

4.9

(280条评论)

7.6

@xaainulabideen

For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail.

£500 GBP 在7天之内

4.9

(69条评论)

6.5

@noumanmehtab86

hi i have worked on FIR and IIR filters and implemented them using microcontroller .

£1,000 GBP 在60天之内

5.0

(31条评论)

6.6

@hayat38402

We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • Multisim • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards. Also we have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.

£500 GBP 在7天之内

4.6

(47条评论)

5.9

@melsayedhasan

Hello, I'm a professional control system engineering with bachelor in Electrical engineering, master in control systems (From Cairo University) and PhD in computer engineering with focus on control systems (from germany). I have good knowledge of filter design, Matlab, and also i have used dspic a couple of times before. I\m ready to start as asson as possible best regards, Mohamed

£700 GBP 在10天之内

4.8

(9条评论)

4.9

@macroenergy

General message: Dear Sir, Greetings from Turkey. I hope you are good. Let me introduce me. I'm Electronics Enginner who have 19 year experience. My experience is related to power electronics, hardware design, analog design, PCB design and microcontroller coding. My projects summary is attached. Please look them. If you look them you will see that I'm ideal person who can make your project without any problem. Some examples are attached. It shows my ability to make your project. Any questions you can ask me. We can talk details of your project by using SKYPe and Whatsapp. Please give me your SKYPE and mobile phone number. My SKYPE: makinmakin35 I can agree budget which you can pay. Please tell me your expected budget. Please give me your project. I promise that I will give good solution. Please respond to me. I hope you will select me. Have a good time Cheers Metin

£250 GBP 在7天之内

4.8

(14条评论)

5.0

@AwaisChaudhry

Hi, I have read the brief details on the job listing. I am a full stack web developer with 9 years of coding experience. I have worked with multiple similar jobs before. I have completed 150+ major projects just on this website in last 5 years. Apart from that I have a good team of developers for doing web based jobs of any kind. You can check my portfolio here: https://www.freelancer.com/u/AwaisChaudhry?w=f Upon reading brief details I believe its a doable job I have great experience doing projects with Electrical Engineering, Electronics, MATLAB, Microcontroller, Signal Processing. I am confident about getting this done. While I believe we need to have detailed discussion about it. I work as per Eastern time daily so that would be good for us to catch up on this job, Lets discuss this further and get started for you as soon as possible. Thanks! Awais

£750 GBP 在12天之内

5.0

(2条评论)

4.4

@profvipabutaleb

I'm communications engineering TA with 10+ years fo experince , also senior full stack embedded engineer . I have already explorer 16 development kit and the following dsPICs : PIM module for dsPIC33FJ256GP710 and dsPIC33CK256MP502 which features powerful fast ADC and DACs. Developed mega projects using PIC,dsPIC,MSP430,CC1350,FPGA,ZYNQ (SoC) experienced with C/Assembly/Basic programming - FIR - IIR design and implementation experienced with modeling filters using MATLAB / Pythong experienced with IDEs : MPLAB X - MikroC - Atmel Studio - could help you to do the required job perfectly with high quality in short time.

£500 GBP 在7天之内

5.0

(26条评论)

4.3

@EmbedCoder

Hi, I have implemented IIR and FIR Filters and ported them digital signal processors. Also implemented (using c and assembly) speech codecs, image codecs and machine learning algorithms. Designed filter using Matlab. I can do this easily. Kindly share your data sheets and other details about the board that you possess. Thanks n Regards

£650 GBP 在15天之内

4.8

(2条评论)

3.9

@cnewton20

I am very much interested with the content of your task because your post content matches well with my professional area. I have a PhD in Automation Control System. I am an expert in scientific research, Mathematics，Control System Design, Matlab programming, Electrical Design, Fuzzzy, GA, and AI. I have already performed a lot of matlab simulations for 20 years. Please see my portfolio if you want to know my skills in detail.

£600 GBP 在10天之内

4.6

(7条评论)

3.3

@Starkindustries

I’ve done a similar job, if you can come to chat i can show you some of my previous work as reference. I am an expert in this area and want to discuss the project further with you. I have experience in this job, and i can complete this job, waiting for a reply from your side thanks.

£400 GBP 在7天之内

3.4

(8条评论)

4.4

@safiullahhuss

Hi I am an embedded systems engineer with roughly 12 years of experience in data acquisition and control application within the textile and other manufacturing industries, shipping and maritime sector and the aerospace industry. I have designed and implemented various filters including FIR and IIR filters as well as other filtering and control algoritms. I am interested in your project because I too have been interested in testing out the dsPIC. I would love to chat and discuss the project further. Regards, Safiullah Hussaini

£333 GBP 在10天之内

4.7

(4条评论)

3.0

@XiaoDongC

Hi. I’m developing electrical devices , embedded software and service programming. I have designed several devices and have a lot of experience with PIC,AVR microcontroller, ARM processors, Raspberry Pi, and Arduino during that period. Following is my skills and tools3 - System architecture design (project specification and structuring). - Electrical & electronic diagram, and schematic & PCB design. - Firmware development in assembler or C/C++ for any MCU platform. • UART, RS485, I2C, Quad - SPI, USB, CANBus, I2S interface. • FREE RTOS, hal based driver firmware. • Bootloader coding. You could realize your idea at a time , I can guarantee high quality of results. Regards.

£500 GBP 在7天之内

4.1

(5条评论)

3.2

@arkitekFRIDAY

Note: Please Click “CHAT” then simply leave a simple message like “HI THERE” . We will respond quickly as possible. Good Day! We are a team of Architects, Engineers, Artists, and Animators here. I am an Architect by Profession. I have 15 years of experience in Design and Construction Industry. I am excellent in AutoCAD Software and Space Planning that is my strongest skills to help you out accomplishing your Project. I can help to finish your work and deliver this in a minimum timeframe. I hope to hear from you regarding my proposal so we can collaborate with each as soon as possible. Godspeed! arkitek FRIDAY

£250 GBP 在1天之内

5.0

(1条评论)

2.4

@HelpingHut

Welcome to HelpingHut, Here you can find all the solutions related to your tasks. I have huge amount of experience in the field of writing. As a writer, my aim is to generate unique content as per client’s requirements. I can deliver your work within your given deadline and budget. Please give me a chance. I PROMISE you, I will not let you down.

£250 GBP 在1天之内

5.0

(1条评论)

1.1

@AITSoft

Hello there, How are you doing?. I have read the description, I have great experience doing similar jobs related to these skills Electrical Engineering, Electronics, MATLAB, Microcontroller, Signal Processing. Right now I am placing a place holder bid, We will decide the price and time after discussion. Please start the chat so we can have detailed discussion. Thanks.

£555 GBP 在15天之内

0.0

(0条评论)

0.0

@mohammedalqadasi

I am a Communications Engineer and interested in scientific research, antenna design, Matlab programming, and Electrical Engineering. I have already designed a microwave frequency radio frequency identification (RFID) reader antenna. I have experience in measuring various antenna parameters including peak gain and efficiency. I also have proficiency in ADS, CST and HFSS which are worldwide used software for antenna designing and simulation.

£750 GBP 在7天之内

0.0

(0条评论)

0.0

@RyuMaster

Hello, dsPIC has exellent signal processing capability than other microcontrollers. This chip is made by Microchip and I can write a program by C language. The structure of this chip is a little different than other microcontrollers. I have rich experience in MCU programming and signal processing , So I think I can complete your project. Best regards.

£400 GBP 在7天之内

0.0

(0条评论)

0.0

@Sarath129

Hi, I am an electronics engineer. I have 2 years experience in the industry. Give me the bid. Will try to do it in 7 days.

£250 GBP 在7天之内

0.0

(0条评论)

2.1

@Cesar144

Hi, I can do the programming that you need, to be reiterative and reusable in a real-time processing... We can use Matlab to compute the coefficient to be implemented in the code or maybe in offline approach before the main tasks on the chip itself. We can work together to get all the details and tweaks in right order for you. I look forward working with you. Cesar

£600 GBP 在7天之内