I have a VIA VAB-820 SBC and I need to update the YOCTO operating system to its latest version (YOCTO Krogoth). I need you to be so kiosk (without desktop) and run my application full screen. I need a silent kernel (hide texts boot and remove delays). I need all the drivers working, support for OpenGL ES 2.0, SQLite and Qt 5.
I need to compile an image in Yocto Jethro 2.0 for SBC VIA VAB-820. You should give me the image and the steps to generate it. I need drivers running all the SBC drivers (include OpenGL ES 2.0). I need Qt5 toolchain and SQLite database working. I need to have a quiet and fast start (hide text and remove delays start). I want my application to run in kiosk (full screen) mode at startup. Pay up to U$S 200.
I need to compile an image in Yocto Jethro 2.0 for SBC VIA VAB-820. You should give me the image and the steps to generate it. I need drivers running all the SBC drivers (include OpenGL ES 2.0). I need Qt5 toolchain and SQLite database working.
Hello, i need to configura a Intel Gen2 board partition modification php installation wifi config startup services fix ethernet ip Thank you, regards
Looking a Freelancer to change the settings of my OpenGL ES 2.0 software to work in QT5 and Yocto Jethro. Currently it works in Qt 4.8 and Yocto Dora. You can view the code by teamviewer. Tanks.
...board. For lack of internal resources we are looking for an experienced embedded engineer with expertise in the following fields: - Debian on embedded systems - BSP (Board Support Package) creation - Allwinner A13 (on Olimex A13-SOM-512) - Booting from NAND flash - Bash scripting or Yocto expertise Goal of the project: - creation of a Debian image able to boot from the NAND flash (not from the mini SD-card) The image must be: - be reproducible and modifiable (created with bash scripts or with yocto, buildroot, etc., according to your preferences) - be optimized for boot speed - include the drivers for all the module and mainboard peripherals A word of caution: Allwinner A13 is not very well documented and it has a very particular boot sequence. Apply ...
El proyecto consiste en diseñar o modificar un driver para un sensor de imagen CMOS para utlizarlo con un micro iMX6 de NXP (anteriormente Freescale). El iMX6 es un quad core ARM9. Corre un sistema Linux basado en Yocto.
Overview Take existing Yocto / Bitbake scripts for an embedded Linux distribution and polish them into a robust system for building a Linux distribution for a mission-critical embedded Linux device. Also, write bash and Python scripts to automate said Linux distribution in support of automated testing efforts. Project Duration Approximately 2 - 4 Weeks Skillsets Must-have's Experience with Yocto Project / Bitbake (non-negotiable!) Embedded Linux experience Nice-to-have's Has worked on mission-critical and/or safety-of-life embedded systems Extensive bash and Python scripting knowledge Start Date ASAP OR No later than May 15th
Hi, I need someone who will write technical article about build Embedded Linux using Yocto toolchain. It doesn't need to be full step by step instruction how to build the embedded Linux but it has to contain brief process of creation embedded Linux system based on Yocto.
I'm looking for a freelancer programmer with expertise in Linux, Yocto and C ++ programming Qt framework. I need to compile an operating system in Yocto Jethro 2.0, hiding uboot texts, modifying the .bmp Yocto boot image and running an application in Qt 5 in kiosk mode (full screen when starting the OS). In the following link you can download the manuals and resources (source code, manual, images for test, etc). Then hired to program the software in C ++ QT 5.
Please read text and see video (is similar to raspberry pi) Tanks.
We have a gateway beased on the MT7620A, we need Linux Kernel 4.1 running on this SOC. We need uboot and images running. We also need 2 serial ports to be configered. Boot on SPI flash and kernel on SDCARD.
Yo necesito un programador para modificar una imagen de linux embebido (compilado en yocto) para que inicie en modo kiosco una aplicación esarrollada en QT. Por favor, dejar en un mensaje su e-mail para enviarle información detallada. Es preferible que hable español. Luego, habrá mas proyectos en QT (todos de corta duración 2-3 días). I need a programmer to modify an image embedded Linux (compiled in yocto) to start in kiosk mode a QT application. Please leave a message in your e-mail to send you detailed information. It is preferable to speak Spanish. Then, there will be more projects in QT (all short-lived 2-3 days).
We are writing a software for embedded device that is based on VAR-SOM-AM43 computing module (). This comes with a Yocto Linux distribution but we would like to switch operation system for Debian. We need an expert who can compile a distribution that we will be able to load on the bootable SD card and run on the evaluation development kit from it. We would like to run latest stable Debian distribution. The evaluation kits are headless so we can check if it is working if SSH service is started after boot and device would get an IP address from DHCP server. Along with the iso file we would need a step by step documentation including patch files that has been used
I have used ardunio uno to collect sensory data and connect raspberry pi as gateway (python serial library) function with JSON data structure to send sensor data to the cloud.. Now i am planning to use Intel Edison which have an capability of wifi and Yocto linux . So, i am looking for the person can upgrade my approach/programme.
...Embedded / Arduino / GPS freelancer. Hardware: Intel Galileo GEN 2. OS: Yocto Linux others: CAN-BUS, GPS Brief: GPS output data to 2 serial ports; port 1 is NMEA and port 2 is raw data. another signal (PPS: pulse per second) is connected to galileo pin 7. i need 2 C scripts: First script need to get RAW GPS binary data from galileo serial2 (ttys1) and save in a file. thats all. Second script need to get the NMEA in serial 1, save the file, and when PPS arrive, we need to send one timestamp string via CAN-BUS. I writed some code and is running (save data and isolate the timestamp). I need strong knowledge in Intel Galileo GEN 2, because we need to enable the serial 1 in PINS 2,3 using yocto. You will can connect to the project via SSH. ...
...need a description of the necessary modifications to change the boot mode. The system need to work with 800x480 TFT display with touch panel a) resistive with a built-in controller b) capacitive using controller FT5206 - communication via hardware TWI0/1/2 I need description of necessary modifications to make changes to the type of touch panel. Construction rootfs using buildroot or yocto. Buildroot for me is easier to configure and therefore preferred. Make a sample application based on QT (preferred QT5). The application should start at system boot. The main window with buttons that display the next window. Window 1 -> changing the pin output state + Information about the status of one input Information about the state of input pin u...
I need you to develop some software for me. I would like this software to be developed for Linux using Python. Linux yocto
We are looking for programmer who can implement Modbus RTU master functionality into Linux embedded device. Device: CPU Type - Cortex™-A8, Texas Instruments AM3354. OS: Linux embedded, Yocto distribution. All configuration settings regarding Modbus RTU master should be in separate XML file(s). All settings regarding connected Modbus slave devices should be in the same or separate XML file as well. All Modbus devices will be connected to the one COM port with RS485 interface. Connected Modbus slave device protocol description is already available. In general Modbus RTU master functionality must comply with the Modbus protocol. Finally there should be a possibility to implement new Modbus source code incl. Modbus library into existing C/C++ code. Basic manual or comments into...
Prepare Installation Image of Linux embedded system (preferred Yocto or OpenWRT) for Wandboard Quad (imX6). It has to be ready to use OpenCL for the Graphical Unit onboard. Prepare also the full SDK for the board, to work on a PC.
Need somebody to show me how to properly download and install a complete build system to cross compile an application using Eclipse with yocto-plug-in for an ARM based MPU (SAMA5D3-XPLAINED) using the Poky Distribution for Yocto project. The application should be very basic and able to read/write from the serial port to blink an LED. I want to understand the autotools, autoconf and automake in detail. I also want to understand the entire bitbake, recipes, layers, and git procedures. references:
Need somebody to write a step by step procedure for everything described below. Download and install a complete environment to build an application using Eclipse with yocto-plug-in to cross compile on an ARM based MPU (SAMA5D3-XPLAINED). This involves downloading an installing Eclipse, JDK, ADT_INSTALLER, Poky Distribution for Yocto project and building the binaries using bitbake recipes. The application should be very basic and able to read/write from the serial port and blink an LED using a push button on the board. I will supply the details on how to achieve this. Application should be compiled separately for static and dynamic linking. you can check which has instructions on doing all this with links to many documents.
I have a table "WM8850", and I'm looking for someone to help me install an embedded linux image, I been using yocto because it has user interface, but I'm open to use something else, and I'm also open to use a different tablet, the goal is to have a custom linux on a tablet
Potrzebujemy kogoś do napisania oprogramowania na sprzęt Intel Edison Ogólne wymagania: - Oprogramowanie musi być stworzone na środowisko linux (yocto). - Do oprogramowania konieczne będzie stworzenie bazy danych (SQlite lub SQL) - Jedna z części oprogramowania to serwer http, który umożliwiał będzie graficzną interpretacją wyników pobieranych z bazy danych oraz generowanie i wysyłanie raportów - Poprzez serwer możliwa będzie zmiana parametrów pracy Intel Edsion - Modyfikacja pól z bazy danych realizowana będzie poprzez serwer http.
We run outdoor-devices based on raspberry pi platforms. Those devices are remotely controlled via a web-application that generates the control-commands and sends them via openvpn to the respective Raspberry Pi device. Due to poor infrastructure, some of the devices must work under 3...plug-off plug-on the power cable to re-initiate the internet connection. This is too nasty and costly. The scope of this project is to develop an appropriate software running on the ArchLinux RaspberryPi which initiates a reset by interrupting the units power as soon the internet-connection is lost for a given period of time. We have foreseen to use Yocto-Watchdog's as hardware unit (please see for details.
- Creation of an embedded Linux distribution (for example Yocto Projekt) for PowerPC - U-BOOT Knowledge (Universal Boot Loader for PowerPC) - Boot process through TFTP / NFS - GPIO driver development (nothing complex) - Porting of graphic-libraries from Macintosh/PPC to Linux/PPC Location: Múnich área (Germany) English or German language required
I'm using Yocto to produce a custom ValleyIsland-64 OS image. I need someone skilled to teach me to create a new Yocto layer to include Mongodb-server and NodeJS.
I need you to build an SD image for the Intel Galileo board that includes tshark. You can start from the full image and just add tshark. If you know how to add it using current image so using cli then it is ok too
Need a Linux Driver Developer to implement USB client driver for Yocto Linux on Intel Galileo board. The driver should work like a Keyboard and mouse by redirecting basic commands from serial port or from GPIO input. Basically, the driver need for a demo of possibility. Delivery: Source code and build instruction; Instruction on how to install it on Yocto Linux (Intel Galileo);
Need a Linux Driver Developer to implement USB client driver for Yocto Linux on Intel Galileo board. The driver should work like a Keyboard and mouse by redirecting basic commands from serial port or from GPIO input. Basically, the driver need for a demo of possibility. Delivery: Source code and build instruction; Instruction on how to install it on Yocto Linux (Intel Galileo);
program must be running on the with Linaro Ubuntu 12.04 LTS and must get data from to temp and / yocto-4-20ma-rx for pressure gauge
...considering bidding just if you completely match the requirements. Starting from "needs", I need I hold a technical conversation about Yocto. I am a good RTOS embedded designer, with a very partial knowledge of Linux RTEI, and no knowledge of Open Embedded, nor of Yocto. After all, I have not to write code or drivers, but I have to completely understand the architecture and methods. I expect a total of 30 to 50 hours is enough for achieving my target. This will be done by means of dedicated chats on Skype: since the meeting is scheduled for Monday, this bid runs just for 24 hours and is immediately operative. So here are the jobs requirements: - solid coverage of Yocto and / or Open Embedded ( please specify ) - proficient and "square" En...
Must make a data logger to an engine must use a raspberry pi as web server and here to temp logger and this display to show temperature Here some code that saves temp in a mysql database but'd like to get one, and would only look old temp on web page and live temp old temp
Hi. I need to be taught in Yocto / QT / OpenEmbedded issues. It is an EDUCATIONAL job: if you are interested, and available, and confident, we have to start very soon. You will be payed on hourly basis, let me know your costs. I think that some 40 hours could be enough to start with an overview; this is urgent. After that, we could continue with hands-on lessons, after a while.
...considering bidding just if you completely match the requirements. Starting from "needs", I need I hold a technical conversation about Yocto. I am a good RTOS embedded designer, with a very partial knowledge of Linux RTEI, and no knowledge of Open Embedded, nor of Yocto. After all, I have not to write code or drivers, but I have to completely understand the architecture and methods. I expect a total of 30 to 50 hours is enough for achieving my target. This will be done by means of dedicated chats on Skype: since the meeting is scheduled for Monday, this bid runs just for 24 hours and is immediately operative. So here are the jobs requirements: - solid coverage of Yocto and / or Open Embedded ( please specify ) - proficient and "square" En...
...E | Z | Y | | Factor | 10 | 101 | 102 | 103 | 106 | 109 | 1012 | 1015 | 1018 | 1021 | 1024 | | | | Subdivisions | Name | | [deci-][20] | [centi-][21] | [milli-][22] | [micro-][23] | [nano-][24] | [pico-][25] | [femto-][26] | [atto-][27] | [zepto-][28] | [yocto-][29] | | Symbol | | d | c | m | µ | n | p | f | a | z | y | | Factor | 10 | 10-1 | 10-2 | 10-3 | 10-6 | 10-9 | 10-12 | 10-15 | 10-18 | 10-21 | 10-24 | * Datasource 1. The datasource shou...
Update the Debian GNU/Linux package deb ./ deb-src ./ The tests must be run as part of the package building process. And the output of the tests must be checked to show 100% coverage. ## Deliverables A1) Complete and precise implementation of the description of the bid request. A2) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. A3) Buyer will receive exclusive and complete copyrights to all work purchased. Third party software may be included as long as they are published under a license compatible with the GNU GPL. A4) Software must be platform, browser and os independent. A5) Software must be provided with a mercurial repository initialized when
...drawings) and the corresponding statecharts. The english project description is unfinished, we therefore understand that the deliverable cannot match perfectly. The coder should, however, address all the ideas contained in the document even if the whole is not consistent. The goal is to represent all the ideas in mockups, not to represent them perfectly. The result must use the same structure as ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables
