EAGLE Antenna needs simulation on ANSYS HFSS

$10-30 USD

已关闭

已发布

超过 4 年前

$10-30 USD

货到付款

Hi All, We have an antenna designed in EAGLE and we would like to simulate the performance using HFSS in ANSYS. We need a lesson. How can we set this up? We supply the EAGLE file. You supply a video showing how this can be imported and simulated in HFSS. 1. You must have your own copy of HFSS 2. EAGLE can open the BRD file. 3. You do NOT need EAGLE to open the DXF file. That can be imported directly into HFSS using the FILE:IMPORT:DXF option. 4. A boundary is needed for the DXF after import. 5. Only the top copper and bottom copper are needed. 6. The bottom copper is the ground plane. 7. Please sweep the input from 137Mhz to 2.7 Ghz 8. There is a coax feed using an SMA connector. 9. BRD (EAGLE) file is attached. 10. DXF (HFSS) file is attached. 11. Please simulate to show the swr so that we may compare the simulation with the fabrication. 12. We are using an FR4 substrate and a 1.6mm thickness.

Electrical Engineering

PCB Layout

Antenna Design

项目 ID: 21097121

关于此项目

5提案

远程项目

活跃5 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

5威客以平均价$40 USD来参与此工作竞价

@thasleemkamila

I have well experienced in doing such kind of jobs....................................................................................

$20 USD 在7天之内

4.8

(45条评论)

5.6

@hayat38402

We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards.

$20 USD 在7天之内

4.6

(44条评论)

5.8

@engahmed7

Greeting! My name is Ahmed Abdalaziz and I am an expert antenna engineering. I have a master's degree in RFID antenna engineering and microwave and I work as a university doctor and have 5 years of experience in antenna designing, reviewing and writing research and scientific thesis. I supervised many thesis and scientific researches for both masters and undergraduate students. I have published many scientific researches in international journals about antenna and designing. I work as a referee in many international journals. I use CST, HFSS, and Cadfeko software's in antenna designing if you like, I can send you some of the samples of antennas I designed from before. I believe communication is key to any successful project, and I’d like to start things off on the right foot but suggesting we schedule a phone or WhatsApp call to discuss the project further. This will enable us to make sure we communicate well and that both parties are completely comfortable with the scope of the project. Please tell me to know a time that works best for you and I will make sure that my self available. Thank you for your time and consideration. With Regards, Ahmed Abdalazi

$30 USD 在3天之内

0.0

(0条评论)

0.0

@RFAntennaPhD

Hi! I am electrical engineer with specialization in antennas, I have published many research papers in the same field. Can you please send me layout of the structure as I dont have eagle installed.

$100 USD 在7天之内