A structural engineer is familiar with wood structural buildings in the USA.

I'm an expert in *Civil Engineering (Structural Analysis and Design) *Geotechnical engineering. *Research Writing. *Water resource engineering. I have more than 6 years of experience in this field. I am an energetic, ambitious person who has developed a mature and responsible approach to any task that I undertake, or situations that I'm presented with. I expertise in **Structural Design **Fluid mechanics **Soil mechanics **Road design **Design of steel and Reinforced Concrete structures. **Piping System and Water/wastewater treatment. **Plumbing, Drainage and sewage etc. **GIS Proficient at Drafting in Auto CAD, Civil 3D, BIM Modelling with Revit, and Structural Analysis with SAP2000 and ETABS. Have Experience with Construction projects at planning, Quantity Estimating (QS), management, and at the creation of schedules, BOQ estimation and Drafting.

Hi there! I'm Senior Structural Engineer . I'm Senior Mechanical Engineer . I checked with your project and interested with it. I done many project relate to design structural wood as Design calculation timbers frame, shear wall bearing load, beam wood and structural wood and connection as well. pls drop messages to me we will discuss more. Familiar with US, BS, EU, CSA,AS IBC,UBC, MBMA,AISI,ASCE...standard. Best regards Bui.q Senior structural design.

Hello sir, I've read your project considering the need of an expert in structural engineering familiar with wood structural buildings in the USA I‘m a civil engineer and a teaching assistant at the faculty of engineering Tanta university in Egypt , I have a lot of papers on international magazines related to Science, Mathematics and physics & I've performed the academic IELTS test with a score band 7 out of 9 I have done lots of similar work designed using (SAP 2000 ,SAFE, ETABS &CSI COLUMN) -sap for checking beams and slabs -csi column to check the capacity of the column -ETABS to check the earthquakes and windloads I can also make a report about the soil bearing capacity whether it is will carry the designed loads safely or not Here is my portfolio https://www.freelancer.com/u/MohammedZamzam?w=f we can also discuss on which programs do U want the analysis related to your code...For sure I’m aware of BS& EURO code I‘m waiting to discuss a lot with U >>> contact me ASAP <<< it will just take some hours Best regards , Mohammed Zamzam

Hello dear, how are you. I'm a Structural Engineer and have proficient experience of preparing and providing structural calculations and drawings of wood buildings. I have done a lot of projects in the USA with clients, contractors and PE for getting the required permits for their buildings. I'm familiar with international building codes and US standards such as: IBC, IRC, CBC, ACI-318...etc. I can send you samples of my previous work, just contact me over chat. Kind regards, Mohammed  

Hi I am Msc Structural Engineer with 15 years of experience in this field. I am working on wood structures of USA from last 6 years so i can do your job upto your satisfaction. I have done work for California, Florida and NY

Hi, I am experienced structural engineer/designer and I am familiar with US standards in wood/timber construction. I can help you with any design or analysis project and I am ready for long term engagement. Please contact me to discuss your project I would love to hear what is this about as I love challenges. Thanks.

Hi There, I have read the Project description and interested in your projects. I have worked on several Projects in LA, CA & Orange County, from Remodeling, Addition & New House designs. Please feel free to discuss it with me via "CHAT". ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ PLEASE CHECK MY PORTFOLIO FOR PREVIOUS WORK DONE at following link https://www.freelancer.in/u/creativeaxisarch ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ I am Amit an Architectural & Structural Engineering Professional having 12+ years of experience in - Architectural & Structural Designing, Drafting & BOQ preparation. - Auto cad 2D & 3D drafting & designing. - Conversion from PDF to CAD. - Amendments/Modification of Auto cad floor plan drawings. - 2D CAD Drawings/Fabrication drawings/Section details/Isometric views ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Software Using : AutoCAD - Sketchup - Etabs - Staad - Excel ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ If you award this work I will provide you the precise work in the proposed time limit. I always assure best possible service to the clients. Now, I am Looking for your Positive Response. Sincerely, Amit Z. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Proposed quot and time depends on the scope of work.

I'm Professional Civil/Structural Engineer working in UAE with 20yrs of experience as Structural Engineer,Consultant and Estimation ,I can delivered the project on time,econimical result within the budget. I have previous project done in county kern club in California USA ,for reference pls look at my feedback because the owner is repeatedly hiring me because they like the quality of work Please leave a message so we can discuss the deadline and budget of the project.

Hello, I have briefly read the description on wood structural buildings project, and I can deliver as per the requirements however I need us to discuss for more clarity on the details, deadline and budget as well. I reach out to see whether the opportunity is still available. If the job’s no longer available, I’d appreciate you throwing my hat into the ring for any similar opportunities in the future. Thank you for your time, I look forward to hearing from you soon, Best Wishes, Kevin M

hello hope you are well, i have read your project description and understand it . I'm an Architect Engineer with over 10 year of experience in Architectural designs, 3d visualization, construction drawings, landscape, and interior design. I'm professional in Auto-cad, Sketch up, Lumion and other 3d softwares. I am available to begin to work for you immediately. you can check my portfolio on my profile or contact me to send examples of my work that match this job

Dear sir’ I am a structural engineer based in london and i have experience designing timber structures using american standards. I have already designed a house you can check in my portfolio it was located in texas and we had to conform to the building regulations there Kindly contact me and share more details about thr project to discuss Regards

Dear Sir I am a professional structural engineer and I have six years work experience in structural analysis and design. I have experience to work with different types of projects located in USA,UK, Australia and Canada. I have sound knowledge about USA,UK, Australia and Canada code and standard. I am expert in Etabs, StaadPro, SAFE, SAP2000, Autodesk Robot structural Analysis, Tekla Structure, Advance Steel,AutoCAD. I can do your job properly. Regards Arafat Rahman

hi, Dear Do you want Safe and Stiffness Structure? Then Hire me. I'm a Civil engineer with good knowledge in ASCE and ACi code. I strongly believe that I will provide you with the best results possible in a very short time. I can work by using some software such as Sap, Etabs, StaadPro, Midas, RobotStructure, and so on. Please take a couple of minutes of your time to discuss your project with me. I will not stop working for you until you are fully satisfied. Kind regards, Blendi

Hope This Proposal Find you in Good Health! I am a structural engineer and familiar with wood structural buildings per US code IBC, ASCE-7, NDS, ACI, ect. I have experience of similar work with USA based company named "IMEG Corp" for Ten years, where I have to work with Architect, MEP, Bio-Medical equipment planning and other agency to do the structural engineering. You just need to respond me in chat so that I can share my sort profile work and relative thoughts for your review. We can start with small work and once you are comfortable then We will work for a long time.

i am a civil engineer for 8 year working around world for Australia , saudi arabia ,Egypt , Swid , .... i can easy help you and i will be brief and feel free for adjustment until you will be satisfied about your work i will do your structural design according to any code you need we can discuss more details over chat you can check my portfolio below https://www.freelancer.com/u/Hossamaboelnaga1 thanks

Hi there, This is Pooja Vyas from the Selan Project Consultancy. I have gone through your project specifications and would be glad to work on this project if getting a chance. We have an in-house team of Structural Engineer can deliver this project very precisely as one of them is USA returned and knowing all the USA coding standards too. We have 15+ years of experience in the industry in delivering the solution for commercial, industial and residential projects. You can take a look at the recent work using the following profile link. https://www.freelancer.com/u/Pooja1808 We would be glad to discuss further details with you about the kind of requirement you have so we can move forward on the next step accordingly. I and my team are available to getting started with this project at your convenience. A quote is a placeholder and it may vary after reviewing the precise requirement. I expect to speak with you soon. Regards, Pooja Vyas | Selan Project Consultant

I have a PhD in Fluid Mechanics from the University of Toronto and is well versed in all computational and analytical software. Dominant person - catia - Inventor Dynamic analysis with Adams- Static analysis with abaqus and ansys *** Special design of hydraulic, pneumatic and hydraulic circuits 3D -autocad- solidworks -editvideo - and Photoshop Numerical calculations with Matlabe Familiarity with the appropriate element Optimizing and providing industrial advice on mechanisms We hope to be able to work with dear friends sincerely and professionally. Thank you very much

I am a senior structural engineer. I have been working over 10 years in high-rise, residential, commercial and industrial projects.

Hello sir, we are providing consultancy are given below:- Key tasks include: preparing reports, designs and drawings making calculations about loads and stresses selecting appropriate construction materials providing technical advice obtaining planning and/or building regulations approval liaising with relevant professional staff such as architects monitoring and inspecting work undertaken by contractors administering contracts managing projects inspecting properties to check conditions/foundations. Regards lakshya sharma