BC, Canada 220 Acre Development

$25-50 CAD / hour

已关闭

已发布

大约 1 年前

$25-50 CAD / hour

The property consists of about 220 acres. Preferably, the candidate should be a civil engineer and architect highly skilled with 3D Civil and Architectural AutoCAD. First priority is a civil engineer. We have some preliminary civil site planning completed. We do not have a CAD file of the existing work, so we require the work to be redrawn. Basically we have pdf files and a clean dwg and LiDAR files. The plan consists of about 400 single family lots, 200 low density condos of triplex and fourplexes, (to be designed) 15 highway commercial (4 buildings to be designed), 10 general commercial (2 buildings to be designed), 20 acre RV site, 3 heavy density multi 6 storey condos (towers) (one to be designed), 60 unit 4 storey low income apartment building (to be designed), 250 seat casino with 120 room full service hotel (to be designed), family fun centre (mini Disney Land) with 120 room full service hotel, indoor water-slides, half Olympic pool, gymnasium and many outdoor features (to be designed), an 80 room senior's care facility (to be designed) and many other uses. We require the site plan ASAP. In addition, we have a new highway access to be designed and have an issue with water. Sanitary is by way of a forced main, appears adequate, other infrastructure appears adequate. At first it would be beneficial to Zoom and go through it. I will base the wage on the the experience of the candidate. I am the project manager. .

3D Rendering

Architectural Engineering

AutoCAD

Building Architecture

Civil Engineering

项目 ID: 36161653

关于此项目

32提案

远程项目

活跃1 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

32威客以平均价$35 CAD/小时来参与此工作竞价

@rachel3010

Greetings! Hi there! We are a 3D expert over an experience of more than 7 years dealing with all kinds of 3D works. We will give you all the 3D files after project completion and also do revisions if required. When do you need this finished by? I've previously worked on the exact same project for another employer. You can check our work here: http://rachel3dmaniax.weebly.com. Please see the sample I have attached and I look forward to working on this project with you. Thanks

$25 CAD 在10天之内

4.9

(214条评论)

7.4

@ifamsiddeeq

Hello there, I’m a Civil Engineer and expert in Structural Analysis and Design. I have more than 6 years of experience in the Civil Engineering field and having a strong knowledge in Geotechnic, Hydraulics and Hydrology, Building Infrastructure and Industrial, mining and metal industries. I can help you in providing the structural design necessary as per the standards and guidelines. I can provide you a good work along with great satisfaction. Looking forward to hearing from you Thanks and Regards :)

$38 CAD 在40天之内

4.9

(72条评论)

6.7

@liveexperts123

Hi there,I'm biddin on your project "BC, Canada 220 Acre Development"Civil Engineering, Architectural Engineering, Building Architecture, AutoCAD and 3D Rendering The property consists of about 220 acres I have read your project description and i'm a Professional Engineer therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

$69 CAD 在908天之内

5.0

(14条评论)

6.2

@MohammedZamzam

Hello sir, I’ve read your project considering the need for an expert in structural engineering to help U with BC, Canada 220 Acre Development I’m a civil engineer holding a master's degree and have more than 5 years of experience in the field, and of course, I can help finish the required task in the required time. (I’ve done more than 50 projects finished successfully _ U can Check my reviews) Similar project as yours can be provided, just kindly inbox me for further details. Regards, Mohammed Zamzam

$40 CAD 在40天之内

4.9

(50条评论)

6.3

@tranvuthai

Dear sir! I am an AutoCAD expert, Architect and Civil engineer. I checked your job carefully and I have a great interest in your project. I have many experiences in your project and can deliver perfect result within deadlines. And I have professional experience in preparing architectural drawings such as landscape design, floor plan, elevation, site plan, roof plan, foundation plan, for building permit. I have a lot of experience of converting pdf, sketch or image drawing to AutoCAD. You can confirm on my profile page. https://www.freelancer.com/u/tranvuthai If you hire me, then your project will be completed more successfully. I am waiting for good news. Best Regards Thai

$25 CAD 在40天之内

5.0

(11条评论)

5.8

@fayyazs789

Hello Gordon C., I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your BC, Canada 220 Acre Development plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

$50 CAD 在7天之内

5.0

(18条评论)

5.9

@Sangvlog

Hi, there? I read your project carefully. I am a building architect with experience of more than 7 years. I have worked a project very similar to what you are seeking. I have many experience in Architectural drawings for permit & 3d modelling & 3d rendering with realistic render. I am expert in AutoCAD, 3ds MAX, Sketch up, Chief architect, Autodesk Revit, Lumion. I am sure I can provide a good result in time. Thank you for your project.

$25 CAD 在40天之内

4.9

(15条评论)

5.3

@YoussefTadros

Hello, We are a group of expert Engineers with a very wide experience in structural design using American Codes. We’ve done hundreds of similar projects using American and Eurocodes, so I’m sure we’ll make your project perfectly and in time. Please contact me to discuss more about your project, Thanks, Youssef

$38 CAD 在40天之内

5.0

(12条评论)

5.3

@EmmaTran1110

Hello, how are you? Thanks for your considering my bid. i am certificate building architect and have full experience in architectural drawing -floor plans, elevations sections and footing etc. My working will be start immediately and deliver the quality result on time. Please send me message and we will discuss about your work in more details. Thanks.

$38 CAD 在40天之内

4.6

(18条评论)

5.3

@Valuesolutions

Hello, I hope this finds you well. I have just seen your project requiring; Building Architecture 3D Rendering Civil Engineering AutoCAD Architectural Engineering I believe that my 10-year experience in this field is what you need right away. Avoid the headache of looking further. Let's save time and focus on the real task. My proposed timelines and budget are just placeholder and an open for negotiation to increase or decrease as per the full requirements at hand. Allow me to prove how better my review can be. Smile all the way! Click the message button, so initiate the conversation. Regards, Fridah

$38 CAD 在40天之内

4.9

(6条评论)

5.0

@Kubragull

Hello Dear Employer, I am an Interior Architect and Architectural Visualization Specialist. I have read your job requirements and I am confident that I can do the job very well. Please message to talk more about the project. Thank you!

$25 CAD 在40天之内

3.4

(11条评论)

5.2

@AhmedElareshy

Hello dear, I read your project details and I am very interested on it I have more than 10 years of experience in structural design, I have a structural design office in Egypt. Working with me a group of fantastic engineers ( architect and civil engineers). We designed many concrete, and steel buildings before. If you are interested, I can send you a sample to look into it. I think we will be very helpful to you. Regards,

$25 CAD 在40天之内

5.0

(3条评论)

3.5

@kingjoey447

⭐Hi. I am very interested in your project. I am a product designer/ building architect/structural engineer with more than 5 years of experiences in the fields of commercial projects. I work in Solidworks, AutoCAD/CAM/CAE, SketchUp, Revit, Autodesk Fusion 360, 3D Max .I am always respectful of my clients and try to figure out all issues about their project. If you are hire me, your project will be complete very quickly and perfectly. I'd like to discuss more via chat. thanks.

$35 CAD 在40天之内

4.5

(2条评论)

3.6

@ayaabuzeid92

A talented architect in design with high skills in 3ds max , photoshop and autocad having 8 years experience in interior and exterior design . I went through projects like this with perfect outputs.

$25 CAD 在40天之内

5.0

(5条评论)

2.4

@rashidamjad

Hi there, How are you? I can work with your project requirements mentioned. I can definitely pull it off once provided with detailed file of your requirements. Some points are needed to be discussed before starting so lets talk. I have good experience in BC, Canada 220 Acre Development including Civil Engineering, Architectural Engineering, Building Architecture, 3D Rendering and AutoCAD. It would be great to have you on board and start it as quickly as possible. So it would be my pleasure to build long term relationship with you. All my skills are related to this particular project. Lets have a detailed chat about this project. Waiting from your end now. Thanks. Rashid Amjad.

$48 CAD 在38天之内

5.0

(1条评论)

1.9

@Ghazamarchitect

I am writing to express my interest in the civil engineer and architect position for your property development project. With over 10 years of experience in both fields and proficiency in 3D Civil and Architectural AutoCAD, I am confident that I can contribute to the successful completion of the project. I am aware that you require the existing work to be redrawn since you do not have a CAD file, and I am comfortable working with pdf files, LiDAR files, and clean dwg files. Additionally, I have experience in designing highway access and addressing water issues. I am confident that my skills and expertise can help with the timely delivery of the site plan.

$25 CAD 在40天之内

0.0

(0条评论)

0.0

@sirsninslight

Hello, my name is Rinalds and I'm a professional Architect, Structural Engineer and CAD/CAM Expert from Latvia. I understand you need someone who can handle this project and I think I'm the perfect fit! I have extensive experience in the fields of Architecture and Structural Engineering, with particular expertise in Permit Drawing of Houses, 3D Design (Exterior and Interior), Mechanical Product Design. Additionally, I am a certified Autodesk Revit, Sketchup, Tekla Professional user as well as an Adams Create Suite user. Additionally, I have experience with CAD/CAM programs such as ANYSYS and CFD software like Abaqus. I am confident that my skillset is exactly what you're looking for when it comes to handling this project. My experience in these areas makes me uniquely qualified to help you bring your vision to life. You can trust that I will work diligently to make sure your needs are met in the most efficient way possible. If you'd like to discuss further please don't hesitate to contact me soon! Regards, Rinalds

$38 CAD 在40天之内

0.0

(0条评论)

0.0

@eliascarva

Civil and Hydraulic engineer and experience in making plans and hydraulic calculation -------------------------------------------------------------

$35 CAD 在40天之内

0.0

(0条评论)

0.0

@santi3ing

Hi i'm a civil engineer with skills in CAD drawing and experience in structural and hydraulic design i can deliver on time and with quality

$35 CAD 在40天之内

0.0

(0条评论)

0.0

@byronpenaloza

Hi, I'm Byron Peñaloza, civil engineer BS. I'd like to work with you in this project. I have a lot of experience analysing, designing and modeling structures with SAP2000, ETABS, AUTOCAD & REVIT. Also, I work surveying with TOTAL STATION & DRONE, managing extense point clouds. You can review my profile to verify my experience. Please feel free to contact me anytime!!

$30 CAD 在40天之内