1. 将测温电路输出的模拟电压信号经过模数转换器变成数字电压信号输入到FPGA 2. 对测量值和期望值进行比较（PID） 3. FPGA根据比较结果生成PWM（作为开关）控制加热电路 4. 加热电路是一根电阻丝，通电流来加热 5. 配置通信模块：将通信模块与FPGA连接，并使用相应的协议（例如UART、SPI或I2C）配置通信模块。 6. 编写上位机软件，能设置目标温度（4.27K），显示当前温度 7. 测温电路电压与温度的关系是65V/K，环境温度波动是10mK，要达到的温度的分辨率是10µK 8. 测温电路已经做好，不包含在这个项目里 9. 开发环境：Vivado 2018.3 FPGA型号：AX7A200T
T3核心板硬件资源基本需求 基本硬件资源 1. 电源供应 DC电源输入，5V单电源输入，CPU要能检测到这个电源是否供电； 电池输入，锂电池电源输入； 实时时钟电源，使用纽扣电池； 2. 显示接口 要支持RGB，LVDS和MIPI接口，由于同时只能使用一个接口，所以这3个接口的管脚可以复用； 3. 触摸屏接口 电阻屏接口，使用ADS7846或者兼容芯片，使用SPI接口； 电容屏接口，使用IIC接口； 4. SD卡接口 CPU要预留出SD/TF卡接口管脚； 5. 网络接口 使用RMII接口的PHY，所以RMII接口管脚也要预留出来，PHY使用DP83848IVV； 6. 串行通信接口 预留出1个RS232用的UART； 预留出1个RS485用的UART，另外还要预留1个管脚用来RS485的方向控制； 7. USB接口 预留出1个USB接口用来外接USB设备； 8. 旋转编码器接口 使用2个外部中断口来接增量型旋转编码器； 9. 蜂鸣器接口 使用一个PWM输出来控制蜂鸣器； 10. GPIO接口 至少预留出32个GPIO口用于外部设备的控制，如键盘输入，指示灯输出，三态安全开关输入，三档选择开关输入等； 基本驱动需求 1. 旋转编码器输入驱动 旋钮编码器驱动要求能判断编码器旋转方向，目前这两个GPIO口不给上层读取, 直接由驱动发送按键值，就是加入LINUX的输入事件，正向旋转发送键值59，反向旋转发送键值60，从event0读取。 2. RS485驱动 RS485需要1个方向控制脚，当向对应的UART发送接收数据时，方向脚能自动实现方向控制。 3. 蜂鸣器驱动 蜂鸣器驱动要求能设置PWM输出的频率，输出的时间，输出时间到了自动关闭PWM输出。 4. 薄膜按键驱动和USB键盘驱动 预留24个GPIO作为薄膜按键的输入，目前的驱动是作为GPIO口来读取的；最好也缴...
...5、逻辑分析能力强，条理性强，有一定的讲解能力； 6、有相关工作经验优先。 岗位职责： 1. 进行嵌入式系统（Embedded Linux）驱动程序开发。 2. 负责系统底层的BSP相关工作，如Linux Kernel移植优化，设备驱动开发、移植和优化。 3. 参与项目需求分析，进行驱动软件的详细设计。 4. 根据公司技术文档规范编写相应的开发文档。 驱动工程师 Software Driver Engineer 任职资格: 1.精通C/C++语言、ARM汇编，熟练使用GCC。 2. 至少两年以上嵌入式系统（Embedded Linux）软件开发经验，精通嵌入式系统软件开发。 3.深刻理解处理器架构，热爱处理器相关技术。深刻理解内存、DMA、中断等概念。熟悉ARM 处理器。 4.精通Linux 下驱动程序开发。有USB、video、audio、UART、IIC、SPI、SD/MMC等开发经验佳。 5.深入理解Linux文件系统、进程管理机制和内存管理机制。 6.熟悉威盛平台驱动开发者优先 必须：至少两年以手机或平板驱动开发经验。 岗位需求： 1、精通 C/C++/Java 编程语言，并且有相关项目开发经验。 2、熟悉Linux下C/C++/Java开发环境。 3、熟悉Linux下 Shell脚本使用。 4、熟悉Android应用编程开发，包括环境建立以及常用调试方法。 5、了解Android Frameworks层和HAL层相关知识，有过相关项目经验者优先考虑。 Android高级软件工程师 Software Engineer for Android Devices 工作职责： 1、熟悉 Android SDK，了解Android framework 2、多媒体框架开发 3、平板...
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
Looking for short and long term help on an canbus tool using ESP32. Proficiency in C/C++ programming for embedded systems. Understanding of CAN bus communication protocols Experience with ESP-IDF Familiarity with hardware design and debugging tools. Knowledge of network protocols and interfacing (UART, SPI, I2C, etc.). Experience with other microcontroller platforms and RTOS Familiarity with automotive diagnostic standards (e.g., OBD-II, UDS) Knowledge of wireless communication protocols (Wi-Fi, Bluetooth) as used in ESP32 Experience with cross-platform development for desktop and mobile applications
...firmware development for a specific STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the specific STM32 model is needed to ensure optimal performance and compatibility. - A background in the chosen application domain (consumer electronics, industrial automation, or wearable devices) would be beneficial. If you've worked on sim...
I'm in need of a Verilog expert proficient with Quartus Prime Toolchain. Key Requirements: - Professional with Verilog: Need someone experienced in designing digital circuits and implementing specific functionalities using Verilog. - Proficiency with Quartus Prime: Familiarity with the Quartus Prime Toolchain is a must. I need to design, simulate, implement and test a digital circuit using the Quartus Prime toolchain as per the specifications I will provide and demonstrate the workflow when using the Verilog HDL to construct a design for a physical Field Programmable Gate Array (FPGA) target. Please apply if you have the required expertise. No teams or companies please.
...microcontroller. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds and protocols. - STM32 and W5500 modules at hand Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM32 via SPI, it should connect to ethernet router with DHCP mode and afterwards establish and maintain a websocket connection to public domain, sending and receiving data. The code should be clear, well commented and easily readable-reusable. The devices used are STM32F103C8 and Wiznet W5500. Please, make your bid indicating your understanding of the project, and your proposed timeline for compl...
We are looking for an experienced freelancer to create a custom DMA firmware using this simple guide : The guide provides detailed instructions, but I lack the time to complete it myself. The project will be executed on a Squirrel 35t board and shou...instructions, but I lack the time to complete it myself. The project will be executed on a Squirrel 35t board and should not take more than 3-4 hours for someone proficient. **Tasks:** - Configure and customize firmware based on pcileech-fpga - Use Vivado for development - Emulate TLP and configure the configuration space **Required Skills:** - FPGA design and programming - Experience with Vivado (Xilinx) - DMA firmware development - Verilog/VHDL programming - Debugging and testing embedded systems
...connectivity options including BLE, Zigbee, and Thread. The ePaper display itself will be the Pervasive 2.13" display using the ZIF25 connector and SPI protocol. Schematics and additional reference details are attached, please read these carefully to ensure the ePaper display module functions accordingly. It will be powered by two CR2450 button cells, but please include a USB C connector for programming and backup power source. I'll also need a notification LED and a tactile button. The outcomes I'm expecting are: 1. Updated Schematic (i've attached one i've been working on for reference you can start fresh if you want though) 2. PCB design/gerber file 3. BOM spreadsheet with all components Note: I have the EXT 3-1 board and some 2.13" dis...
Creating a library to control the TMC5160 using only the SPI bus. The library must be ESP32 compatible and will not use other similar existing libraries for other TMCs. It must include: - basic functions for motor setup and movement, positioning - advanced functions such as CoolStep, StallGuard2, SpreadCycle and StealthChop2 - sensorless operation to find home position (StallGuard2) - the library must not block additional ESP code during motor running and control (delay commands etc) and must support running of multiple motors simultaneously (using CS signal) - deploying the library in VS Code + PlatformIO The library functionality will be tested on a TMC5160 BOB + NEMA 8 (8HS15-0604S).
I am looking for an experienced Verilog developer who can work on my Verilo HDL project. Design a digital circuit for a fruit sorter based on following specification. Develop the block diagram (consists of datapath and control units) and the ASMD chart. Assume that there is a 1-bit RESET signal to reset the circuit and it is asynchronous and active low. In addition, there is a 1-bit CLOCK as the clock. The circuit will start the operation when a 1-bit input signal START is asserted. A fruit detector provides a 1-bit input FRUIT that becomes 1 for one clock cycle if banana is detected and the FRUIT signal will be 1 for two clock cycles if orange is detected. There are 2 different outputs which are OUT1 and OUT2 that will be 1 for one clock cycle for the type ...
...into Verilog and run on FPGA device using HLS Vitis. The existing project has: - Edge detection capabilities - Image segmentation capabilities The primary goal of this project is not to enhance or alter the images, but to convert the existing codebase from C++ to Verilog, utilizing HLS Vitis. With your expertise: - Maintain the integrity of the current functionalities during conversion - Reframe the C++ code to Verilog language ensuring a seamless running on an FPGA device. The successful bidder should have significant experience with Verilog, C++, and HLS Vitis, as well as a good understanding of Image Processing algorithms, especially Edge Detection and Image Segmentation. The final output of the conversion should result in an image file product. The d...
...electrical engineer to design an analog audio circuit for mixing multi-channel signals sourced from line level feeds. This will require expertise in designing robust and low-noise analog audio circuits capable of dealing effectively with multiple audio inputs. Ideal Skills and Experience: • Proficiency in electronic circuit design, specifically analog audio circuits. • Experience with handling multi-channel signals. • Familiarity with line level audio signal processing and mixing. We need an engineer with deep experience in high-end analog circuit design using low noise operational amplifiers. We will provide basic diagrams and objectives. The project involves high quality op amps and line drivers for an audio routing project. We will be using FPGA...
...based development board. This project requires implementation of PS side SPI0, SPI1 and DMA to move data from 2 SPI slaves to onboard DDR3 memory. 1) Use your own Zynq 7000 based development board (e.g Microzed, Zedboard etc having DDR3 memory) that you already have. 2) To this board connect 2nos. of SPI EEPROM. We will supply you with the EEPROM boards with jumper cables on other end to connect to your development board. 3) 1st EEPROM connects to PS SPI0 & 2nd EEPROM connects to PS SPI1 interface. 4) Both the SPI interfaces will be configured to operate at 25MHz SPI clock frequency. 5) Configure the PS DMA (2 channels would be needed) for both PS SPI0 & PS SPI1 to read the SPI data and transfer that data to DDR3 using DMA at highest speed...
...currently seeking 4-5 proficient Electrical Engineers to join us for a long-term collaboration. This opportunity is ideal for individuals with expertise in electronics, power systems, and communication systems. Key Requirements: - Strong command over MATLAB for data analysis, simulation, and modeling. - Proficiency in VHDL and Verilog for hardware description and digital circuit design. - Experience with multisim or similar simulation software for circuit analysis and design verification. This collaboration offers an exciting chance to work on diverse projects spanning electronics, power systems, and communication systems. We are committed to fostering a collaborative environment that encourages innovation and professional growth. If you are passionate about con...
The goal of this project is using Vivado tools to enable a hardware implementation on an FPGA board. The key requirement from the FPGA board is high computational speed. Therefore, proficiency in Verilog language is preferred as I intend to implement the NTT algorithm. I am looking for a developer who is experienced with FPGA boards and Vivado tools. The chosen freelancer should also have the ability to maximize computing capabilities of the board for the said implementation.
I need verilog code,testbench and simulation for this duty : Design a vector processing system that performs dot product of two vectors kept in the memory. The length of the vector is given as an input and at each clock cycle one element from each vector is multiplied and added. At the end of the processing a valid signal will be raised along with the result. Elements of the vectors are 8-bit unsigned vectors.
I need a talented RTL designer, proficient in Verilog, to carry out an NTT Implementation project focused on dataflow modeling. Key Requirements: - Expertise in Verilog, with a deep understanding and application of dataflow modeling - Prior experience in RTL design and synthesis - The main goal for this task is to achieve optimization of the design using your Verilog expertise - Attention to detail, punctuality, and efficient communication skills are a must This project offers an opportunity to work with an interesting model and explore optimized NTT implementation. Your contribution to this project will be influential in achieving an optimized design.
Im working on a c++ image processing project , and i need to convert my C++ code to Verilog using HLS vitis , then implement it to run on Ultra96v2 Xilinx FPGA board .
I'm in need of skilled programmers to develop interfaces for my Place and Route EDA flows. The ideal candidate will have experience in the following: - Proficiency in Python and/or C++ - Familiarity with VHDL, Verilog, and SystemVerilog - Experience in file input generation - Strong file parsing capabilities - Ability to manage EDA flows using TCL The interfaces need to be able to handle the entire EDA flow, from file input generation to error reporting. Experience in developing similar interfaces will be a big advantage. Please include relevant work samples in your bid.
I'm seeking an experienced trainer for Spyglass tool, with a concentration on Lint and CDC (Clock Domain Crossing). As beginners in Spyglass and proficient in Verilog, we primarily aim to identify and fix coding errors through this training. Ideal Skills and Experience: - Strong knowledge of Lint and CDC in Spyglass tool - Demonstrated experience in coding and debugging in Verilog - Excellent training skills - Ability to create and simplify complex concepts for beginners.
I'm seeking a well-experienced developer who understands STM32...communication, and Remote device management would be an added bonus. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds. Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM32 via SPI, it should connect to ethernet router with DHCP mode and afterwards establish and maintain a websocket connection to public domain, sending and receiving data. The devices used are STM32F103C8 and Wiznet W5500. Please, make your bid indicating your understanding of the project, and your proposed timeline for complet...
Please help me solve the first file I upload, which uses psoc creator and the board is psoc 4200M, It would be best if you can remotely control my computer to help me complete it now. I hope it can be completed within 24 hours. It is an experiment on SPI wireless stepper motor control, the configuration part is done, and the board that connects the circuit is also connected to my computer, I need someone help me and help me write the code (C).
...programmer, who possesses proficiency in both Verilog and Vivado, to construct and operate a user-friendly program for my FPGA board. The selected FPGA board is from the Xilinx Artix-7 family (part: xc7a100tcsg324-1). The program’s main responsibility will be to feature a rudimentary vending machine program with the following specifications: - Two component spaces which will each hold a distinct item. - A simplified interface featuring two push buttons as part of a keypad. - A capable card reader to handle seamless payment processing. - A clear 3 digit display that relays instructions and alerts to the user. An ideal candidate for this project should have extensive experience working with Artix-7 FPGA boards and demonstrate a clear understanding of Verilog and V...
...programmer, who possesses proficiency in both Verilog and Vivado, to construct and operate a user-friendly program for my FPGA board. The selected FPGA board is from the Xilinx Artix-7 family (part: xc7a100tcsg324-1). The program’s main responsibility will be to feature a rudimentary vending machine program with the following specifications: - Two component spaces which will each hold a distinct item. - A simplified interface featuring two push buttons as part of a keypad. - A capable card reader to handle seamless payment processing. - A clear 3 digit display that relays instructions and alerts to the user. An ideal candidate for this project should have extensive experience working with Artix-7 FPGA boards and demonstrate a clear understanding of Verilog and V...
I am in need of a seasoned FPGA programmer, proficient in Verilog and Vivado, who can build and run a program for me on a ZYNQ 7000 FPGA board. Our primary goal is: - To work on a program that performs Homomorphic Encryption Algorithm, by analysing its architecture - You'll need to identify the blocks responsible for addition and multiplication operations, as well as enumerate all IO used for these operations. Ideal candidate should have: - Extensive experience in conveying complex FPGA architectures in an understandable form - Proficiency in using Vivado for hardware simulation
I'm looking for an expert who can assist me in interfacing SPI with an SDHC card for data storage on an MSP430 FR4133. Key Requirements: - The primary purpose of this project is to facilitate the storage of multimedia files on the SDHC card. - While the read/write speed isn't of utmost importance, it is moderately critical to keep up with the data storage requirements. Ideal Skills and Experience: - Proficiency in programming the MSP430 and interfacing SPI. - Prior experience in data storage projects, particularly handling multimedia files. If you're confident in your abilities and have a solid understanding of these requirements, I'd love to hear from you.
I'm seeking a skilled FPGA developer to construct an intermediate-level chessAI project. The AI is expected to run real-time on a Spartan-7 FPGA board, using Vivado and Vitis. Key Project Details: - **Real-time Performance:** The AI should be optimised for real-time operation on the FPGA board. - **Intermediate Complexity:** The chessAI should be capable of intermediate-level game play, providing engaging and challenging performance. - **FPGA Model:** The project is designed for a Spartan-7 FPGA board, hence prior experience with this model is preferable. Key Skill Requirements: - Proficiency in FPGA development, particularly with Vivado and Vitis. - Prior experience in designing chessAI or comparable AI projects. - Expertise in optimising AI models for real-time FPGA implementation...
DEADLINE 21st I need an Object Detection(displays text on screen of object name) & Live Streaming system(records video when switch or button pressed), all to be implemented on a Zybo Z7 board with a pcam 5c camera module. Here are the details: - **Programming Language**: The system needs to be developed using verilog and xlinx tools. - **Standalone or Integrated**: I'm looking for the Object Detection & Live Streaming system to be integrated with zyboz7 and pcam5c. - **Functionality**: The system should perform real-time object detection and identification, as well as record and store live streams for later analysis. Finally report that includes tests/testbenches should be included based on requirements in
I'm seeking a professional with expert knowledge in precision analog design. Goal of the project is a small prototype board to measure K type thermocouple elements - with two different approaches. Additionaly obvisouly a MCU will take place - as well as RS485 communication. Absolut main aspect is an accurate (in sense of stability, low noise and absolute value representation) K thermocouple element measurement. Two approaches are forseen - using the high precision MAX31856 as well as the AD8495 in conjunction with a 20-bit SAR and 24-bit SigDelt ADC. Apart from the ADC proposition the project comprisis of a full circuit and PCB creation. Additionaly also the needed firmware for the respective communication (over SPI) shall be properly implemented (well structured and ...
...the Rockchip RK3588 SoC and additional peripherals, you'll need to carefully consider the connections and power requirements of each component. Here's a basic outline of how you might design such a schematic: 1. Rockchip RK3588: - Connect the RK3588 SoC to the necessary power supplies, clock signals, and peripherals according to its datasheet. 2. 4GB/8GB RAM: - Connect the RAM module(s) to the RK3588 SoC's memory interface, ensuring proper signal routing and power connections. 3. eMMC: - Connect the eMMC storage device to the appropriate interface on the RK3588 SoC, typically using MMC/SDIO or SPI interface. 4. NVMe M.2 SSD Port: - Provide the necessary connections for the NVMe M.2 SSD port, including PCIe lanes and power connections. 5. USB...
I'm looking for a developer to create a system for my Zybo Z7 board that can detect people in real-time through a connected pcam5c camera and display the detection text on the video feed...Video Streaming: The video feed should be streamed in real-time. - Text Overlay: The detection results should be displayed as a text overlay on the video. Skills/Experience Required: - Proficient in Xilinx SDK and Xilinx Vivado. - Strong background in object detection, particularly with people. - Previous experience with video processing and streaming. - Knowledge of FPGA programming and VHDL/Verilog is a plus. Please note that my budget for this project is $60. I'm open to hearing from freelancers who can deliver within this budget. I have worked on single pixel (multipixel zoom.v i...
We require microcontroller programming services to execute sensor interfacing and manage communication protocols. Our project needs an expert who can: - Interface our 32 bit PIC microcontroller with temperature sensors, analog circuits like Op-Amp and ADC - Implement SPI communication protocol within the microcontroller Experience with PIC microcontrollers is a must, along with a sound understanding of sensors, analog-to-digital conversion (ADC), and SPI protocol. Proven experience in similar tasks will make you an ideal candidate for us.
The project will be done in 2 parts , 1- controlling adf4356 rf synthesizer with matlab code and arduino uno hardware. The work will be done and tested on my hardware using TeamViewer. 2- Controlling mcp3424 and matlab in a loop such that the rf synthesizer generates the frequencies from 0.5 to 1.5 ghz with controllable output power. The mcp 3424 module reads those signals. The code for mcp module reading will be provided, which you can integrate in your adf code in Matlab.
I am looking for a freelancer to help me with a project that involves evaluating image quality with implementing machine learning algorithms on an FPGA. VIVADO would be preferred to work on. I am seeking a detailed project proposal from freelancers. with Verilog coding Ideal skills/experience: VERILOG VIVADO
My project requires the efficient application of Gaussian filtering in Verilog specifically for enhancing image details. The image type for this task is RGB, and the intended result should lead to clear, detailed images showcasing the potential of Gaussian filters. Key requirements include: - Applying Gaussian filtering to provide image enhancement - Working specifically with RGB images - Delivery of processed images in JPEG format Given the technical nature of this project, proficiency in Verilog and image processing is crucial. A deep understanding of Gaussian filtering algorithms is also necessary. Experience with image manipulation software would be a bonus. This project is ideal for freelancers who are detail-oriented and are adept at transforming complex requirements...
Description: We are a drone manufacturing company. We are currently looking for a skilled and experienced Electronics Engineer and PCB Designer who has good knowledge about Jetson boards and STM32 microcontrollers and has a good h...6-layer PCBs. Project Description: We are aiming to build a custom PCB where we want the take the Jetson Orin nano series carrier board and the NXTPX4 Pro Flight Controller and fuse both of them into one PCB with customization for the External connector pins(USB, CSI, JST). We also want to customize and change the connector of the 40pin header on the jetson board to specific JST connectors for I2C, SPI, USRT, etc. Skills required: -Expert in understanding and creating complex schematics -Expert PCB designer -Expreience with Jetson boards -Good Com...
...you will be responsible for designing, implementing, and testing firmware solutions to meet project requirements. Responsibilities: Design and develop firmware for embedded systems using Raspberry Pi and STM32 microcontrollers. Collaborate with hardware engineers to define system architecture and specifications. Implement firmware features to meet project requirements and deadlines. Debug and troubleshoot firmware-related issues throughout the development lifecycle. Perform code reviews and ensure code quality and adherence to coding standards. Work closely with cross-functional teams to integrate firmware with other system components. Document firmware design, implementation, and testing processes. Stay updated with industry trends and advancements in embedded systems t...
I'm seeking an experienced and detail-oriented developer to create a Custome PCILeech firmware for SCREAMER PCIE SQUIRREL direct access memory card utilizing the 7 Series FPGA 35t chip. Firmware must...Squirrel. Firmware must bypass and avoid anti-cheat detection on EAC/BE etc. Responsibilities: - Develop firmware for PCILeech FPGA - Debugging and problem-solving throughout firmware development Skills & Experience: - Strong experience in FPGA programming and firmware development - Excellent debugging and problem-solving skills - Experience with high-speed data transmission - Proficiency with VHDL/Verilog languages The timeline for project completion is flexible, indicating a strong emphasis on quality over speed. However, I am eager to commence with the right candidate a...
I'm seeking a skilled PCB designer to create a prototype less than 4 square inches in size. The design involves SDRAM connected with STM32H750 MCU alongside an external Quad SPI Flash and a 50 pin TFT interface. Key Aspects: - Using Altium Designer, the selected software for the design - Ensuring prototype is suitable for future development Ideal Skillset: - Proficient in Altium Designer - Understanding of SDRAM, STM32H750 MCU, Quad SPI Flash, and TFT interfaces - Experience in compact PCB design - Strong understanding of prototyping methodologies for electronics Your proposal should include a plan of how you'd approach this task, relevant past experience, and a timeline for completion. Thank you!
For this project, I need a skilled Verilog programmer with FPGA implementation experience. The key task is to encode a 4x4 binary (black and white) image into an 8x8 image using least significant bit replacement. Key Responsibilities: - Implementing a least significant bit replacement algorithm. - Delivering clean and efficient Verilog code. - Ensuring compatibility with FPGA hardware. Required Skills and Experience: - Proficiency in Verilog code - Understanding of LSB replacement - Experience with FPGA implementation - Working knowledge of image processing, specifically with binary images.
I am looking for a skilled Verilog coder with experience in advanced digital circuit design and implementation. Tasks will involve designing and implementing complex circuits, specifically those involving CPUs or intricate state machines. Key Responsibilities: - Design and implement advanced digital circuits - Test and debug created designs - Maintain documentation of design process and circuit function Skills & Experience: - Expertise in Verilog coding - Experience with complex digital circuit design and implementation - Familiarity with CPUs and complex state machines - Proficiency in using Xilinx Vivado for running Verilog simulations Please ensure you have this experience before placing a bid on this project.
The objective of this project is to build a proprietary software from existing code available on the web and to modify the code as well as add more features as per our specifications. We are looking for a person or team that's experienced in embedded systems, proficiency with SPI communication. having worked with especially Raspberry Pi and ADALM-PLUTO and on the Linux and Python platform.
Completing an intermediate-level circuit simulation is on the top of my agenda, and time is of the essence. Key Requirements: - Generate a simulation circuit using either Verilog or VHDL. - The complexity level should be intermediate, meaning that it should include components such as adders, decoders, and multiplexers. Ideal Candidate: An experienced freelancer with a strong background in circuitry and simulation languages such as Verilog or VHDL. Quick response and comprehension of task requirements are paramount due to the urgency of the project. Remember, the successful completion of this project is deemed urgent. Therefore, a prompt response and start are appreciated.
The objective of this project is to build a proprietary software from existing code available on the web and to modify the code as well as add more features as per our specifications. We are looking for a person or team that's experienced in embedded systems, proficiency with SPI communication. having worked with especially Raspberry Pi and ADALM-PLUTO and on the Linux and Python platform.
I'm in need of an individual skilled in Verilog who can help me achieve a specific task. - Task: Your main responsibility would be writing Verilog code for a simple module implementation. This does not involve complex system level code designs or CPU architecture. - Objective: The primary objective of the module is to model a specific digital logic circuit. The project does not require interaction with other modules or utilization of specific hardware components. The ideal candidate would possess: - Solid experience in Verilog coding, - Expertise in digital circuits, - Strong understanding of digital logic circuits, - A meticulous approach to ensure accuracy in modeling the required digital logic circuit. If you are passionate about Verilog and love c...
...enhancing the hardware and firmware of our existing PIC24 boards. The scope of work includes: Hardware updates: - Addition of new interfaces - Implementation of new readers like RFID, Weight and other sensors on UART, SPI, I2C Firmware Changes: - Integration of the new reader interfaces - Implementation of bug fixes - Updating existing firmware to accommodate the new changes - Fulfillment of new requirements, which will vary based on specific projects The ideal candidate should have relevant experience in board-level design and firmware engineering, with proficiency in UART, SPI, I2C protocols and development using the PIC24 platform. The project may also involve creating support for additional sensors, enhancing communication capabilities and improving pow...
