Firmware design工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    5,450 firmware design 搜到的工作,价格货币为 HKD

    Position: Embedded Firmware Testing Engineer (Contract for 6 months). Mandatory Skills: Strong C Programming skills. Good knowledge on firmware and device driver verification and Validation for DSP and Microcontroller platforms. Strong debugging skills with JTAG and boot-loader environments. Experience in bring up of peripherals like I2C, SPI, MMC

    $2549 (Avg Bid)
    $2549 平均报价
    3 个竞标

    Searching an expert who can modify Huaweri ONU model 8545 Model

    $479 (Avg Bid)
    $479 平均报价
    1 个竞标

    We are looking fore someone who is proficientin embedded systems and can write firmware, bootloaders, e squared c code etc. We want to write a bootloader firmware to function on our proprietary PCB allowing us remote access to do updates etc.

    $19847 (Avg Bid)
    $19847 平均报价
    13 个竞标

    ...development for a small household appliance (in positive case, I must be able to pass CE quality certification): - optimal solution have to be checked together; - simple testing firmware included (eg: C, Lua,... I have already coded some working example); - files available for further use (eg: for KiCad); 2- prototype PCB produced in small testing series

    $4190 (Avg Bid)
    $4190 平均报价
    17 个竞标

    Develop fully commented C source code for nRF52840 Developerment kit. Using SDK 15.2 and Softdevice 6.1.0 with GCC compiler and eclipse project. Develop test harness to verify operation (prefer python using pc-ble-driver-py) Will require FTDI TTL cable for second uart

    $4614 (Avg Bid)
    $4614 平均报价
    7 个竞标

    ...clinical data scientist in need of an acquisition system for a lab project. I might make a few to share with collegue and thus would like all of the resultant PCB, schematic, and firmware files. Everyone has probably seen the many EKG devices on the market these days that allow you to view and capture a single lead of EKG. My project requires acquisition 12

    $23283 (Avg Bid)
    $23283 平均报价
    17 个竞标

    ...need an expert Xamarin dev for Native iOS and Android apps to interface with custom built hardware. I will supply the hardware but you will need to assemble it, load the firmware i send you and then write the mobile apps to interface. Some experience with Arduino is preferred but not necessary. I have done a few projects with a different developer

    $102 / hr (Avg Bid)
    $102 / hr 平均报价
    12 个竞标

    I am searching for an experienced embedded firmware engineer / software developer with experience in ARM mbed OS who is helping me with writing the firmware for a project incl. the following components: 1) MCU Nordic nrf52 (Fanstel BT832 or BT840) 2) Gyro incl. DMP (Invensense mpu9250/ICM20689 ) 3) Sound decoder (VLSI vs1053b) 4) Serial (SPI) NAND

    $13405 - $26810
    加封 保密协议
    $13405 - $26810
    35 个竞标

    I need someone capable of reverse engineering and hardware i have a software that works for a specific tool and want someone to make the hardware for me or edit firmware of existing hardware contact me for further informations

    $3538 (Avg Bid)
    $3538 平均报价
    5 个竞标

    I need you to develop firmware for me. I would like this firmware to be developed for Windows using C or C++.

    $919 (Avg Bid)
    $919 平均报价
    9 个竞标

    I have an IP camera with Linux inside (BusyBox). I have no access to web interface, it is password protected and I do not know the password. So, I neet that password and root access to the shell of the installed Linux itself. I have taken a full dump from the camera`s EEPROM. But I am not a specialist in embedded systems, so I do not know how to access files. AFAIK if I access files, I will have ...

    $243 (Avg Bid)
    $243 平均报价
    4 个竞标

    I want to customise firmware for Chinese mag250. Original firmware of mag250 has clone kill code so I need someone to help me with that issues.

    $235 / hr (Avg Bid)
    $235 / hr 平均报价
    2 个竞标

    I have an access point (DRAYTEK) which I am attempting to connect to my network. i need someone to login and c...which I am attempting to connect to my network. i need someone to login and configure it here is the manual [登录来查看链接]

    $243 (Avg Bid)
    $243 平均报价
    28 个竞标

    ...engineer or team of engineers to develop an OBD II device from concept to pilot production. The tasks will include the schematic design, PCB layout, BOM, firmware development, production testing software, App, Web design, functional prototype. This is a sample of what I'm looking for: [登录来查看链接] It has the ability

    $25150 (Avg Bid)
    $25150 平均报价
    20 个竞标

    ...of phones that I need to have auto firmware update when they are factory reset. I have a DHCP 160 option pointing to HTTPS server for provisioning. Firmware is also on that HTTPS server but my phones connect to my SIP server correctly and ignore the firmware update task. I need help getting my phones to force firmware upgrade when they come up and provision

    $78 - $235
    $78 - $235
    0 个竞标

    ...labeled either above or below the button. When on the button would say on and be green. When off the button would display off and be red. This phase focuses more on software/firmware that I would assume lives on the raspberry pi. The controller receives inputs from the touch screen and outputs signals to turn on and off power to the pumps. If it makes

    $17753 (Avg Bid)
    $17753 平均报价
    9 个竞标
    NRF52832 Firmware development 1 天 left
    已验证

    I will provide detail via PM. thank you

    $2471 (Avg Bid)
    $2471 平均报价
    13 个竞标

    I Need project: RFID EM 125Khz IC reader ( common chinese rfid device) +...project: RFID EM 125Khz IC reader ( common chinese rfid device) + HID 134Khz reader selectable Design Hardware frontend and Software in C using LPC1114 microcontroller No use module, need analog frontend ( amp op and LPC1114 and some discrete devices only) Firmware write in C

    $3554 (Avg Bid)
    $3554 平均报价
    7 个竞标

    I'd like to develop PCB board using altium designer. I have the block diagram for device I am gonna develop. Candidate MUST have professional s...develop PCB board using altium designer. I have the block diagram for device I am gonna develop. Candidate MUST have professional skills and experience in circuit design, PCB design and firmware programming.

    $78 - $235
    加封
    $78 - $235
    4 个竞标

    I'm looking for smart watch firmware developer who knows Xiaomi Mi Bunny Watch 2.

    $173 / hr (Avg Bid)
    $173 / hr 平均报价
    5 个竞标

    We are looking for an experienced C developer with good english skills for maintaining and improving on a hardware wallet firmware. Applicants will have the chance to work on a challenging long term project.

    $220 / hr (Avg Bid)
    $220 / hr 平均报价
    41 个竞标

    ...coding programs and recharging the battery 7. 2-3 sample buttons on the device 8. Test LEDs before each port and buttons 9. Basic firmware and boot-loader programs are to be included 10. Some open sourced SDK for developing firmware and embedded applications Deliverables: 1. Schematics 2. PCB Layout 3. Gerber Files 4. Bill of Materials 5. Assembled PCB

    $3789 (Avg Bid)
    $3789 平均报价
    13 个竞标

    I am looking for a talented ESP32 firmware developer who can do the task of switching WiFi and BLE in ESP32.

    $1522 (Avg Bid)
    $1522 平均报价
    13 个竞标
    Makefile Help 已经结束 left

    I need help making and compiling a simple Makefile that will be used for uploading a firmware for a Teensy Board (Similar to Arduino).

    $251 (Avg Bid)
    $251 平均报价
    7 个竞标

    I will provide You pinout and config in CubeMX. The MCU is STM32L071RBT. I need a basic structure of FreeRTOS-based code (just an "example") with the following: + Task that will be executed every 15 minutes (The task will read data from UART sensor) + MCU will go to sleep state / low-power mode and power off all the peripherals between the task execution - probably will be woken up by...

    $1287 (Avg Bid)
    $1287 平均报价
    8 个竞标

    i want firmware to be controled from alexa voice and blink app

    $863 (Avg Bid)
    $863 平均报价
    4 个竞标

    Background of project: Some IoT devices have a firmware with a IP pointed to a server which is no longer available, we have setup another server with different IP to replace the old server, so these IoT devices 's firmware need to be updated with the new server IP. Tasks: 1. Set up an environment which has an virtual IP to "cheat" these IoT device to

    $1145 (Avg Bid)
    $1145 平均报价
    8 个竞标

    Need assistance with BLE firmware set up for battery operated sensor. Battery management and experience with TI BLE projects essential.

    $4511 (Avg Bid)
    $4511 平均报价
    16 个竞标
    OBD2 + GPS + LORA 已经结束 left

    OBD2 + I/O + GPS + LORA = Pcb design, Firmware and Prototype Development.

    $10943 (Avg Bid)
    $10943 平均报价
    16 个竞标
    OBD2 Codes 已经结束 left

    I need a firmware that can support 100 PID for CAN protocol or universal protocols.

    $3154 (Avg Bid)
    $3154 平均报价
    2 个竞标
    $63 / hr 平均报价
    12 个竞标
    Decrypt this photos 已经结束 left

    Hi there :) I sent you a .r... So you i can see the photo on the camera but on my pc no. i have made this photos encrypted with nikon d7000 that use modiffied firmware. i need a decryptor to can use this camera without update the firmware with the original verision from nikon website. if yo can do that you are the man that i'm looking for

    $3412 (Avg Bid)
    $3412 平均报价
    3 个竞标

    ...your offer please - business analysis, system analysis, software development,database design and development,firmware development (embedded software for micro-controllers),technical support for o users, including first support line, IoT software and hardware design, IIoT (Industrial IoT), special support for startups. We want to support startups in exchange

    $926 (Avg Bid)
    $926 平均报价
    53 个竞标
    GPS (OBD2) prototypes 已经结束 left

    OBLORA Objective; a device that can report to the server, the status of its host at all set instance. Reports; we have three (3) types of report aim...disconnection. Power; this device is powered by the host body LoRa; communicates with the LoRa gateway MCU; cordinates the entire process, each MCU to bear its unique ID, firmware to be enbedded into it

    $8033 (Avg Bid)
    $8033 平均报价
    7 个竞标

    I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will rep...

    $196 (Avg Bid)
    $196 平均报价
    2 个竞标

    ...[登录来查看链接] I need a firmware that using GPIO connection has a push button or toggle switch (needs to be configurable by parameter) that execute the turn on and off a room (also this configurable by parameters). If the configuration will be with push button, the firmware need to have an extra function to dim the light, first

    $2163 (Avg Bid)
    $2163 平均报价
    10 个竞标

    There are two boards: nRF51822 (Raytac MDBT40) and a sensor Si1147. In scope for this project is the creation of the sensor driver and exposing BLE Profiles. The project is done when: - the code compiles with GCC, commandline - after flashing of the hex, following profiles are present in the peripheral node: 1) UV Index 2) Ambient light 3) Proximity -- plus the one for the configuration of the ...

    $1835 (Avg Bid)
    $1835 平均报价
    6 个竞标

    ...next 1-year support. We plan to have this RFID Reader and Controller developed and sell in the Middle East and African countries. The device should be very stable. The code/firmware should be easily upgraded. Here are our requirements for integrated 125 kHz RFID Reader and Controller which can be used in School for Student Attendance: 1) We need a 125

    $8025 (Avg Bid)
    $8025 平均报价
    15 个竞标
    Design a PSU controller 已经结束 left

    The task is to design a small PCB that controls the logic to interface to two power supply modules to manage their operation in a redundant configuration. Your job will be to design the interface PCB with a microcontroller that will perform the following actions: 1. The modules would plug into the board, provide a basic filter along with protection

    $3538 (Avg Bid)
    $3538 平均报价
    20 个竞标
    build a project 已经结束 left

    build a project, build pcba , build firmware

    $55 / hr (Avg Bid)
    $55 / hr 平均报价
    17 个竞标

    I am looking for someone who has hands-on experience of Project development in TrueSTUDIO, CubeMX for STM32F4 MCU and have very good C Programming and firmware development skills.

    $361 (Avg Bid)
    $361 平均报价
    11 个竞标

    I am looking for a firmware engineer who can develop nRF52840 program. If you have experienced, please bid with your history of projects for nRF52.

    $1765 (Avg Bid)
    $1765 平均报价
    16 个竞标
    Need PIC firmware expert. 已经结束 left

    Hi If you can start right now, please bid I am using the PIC16F1824. the goal of project is to read the sensor data(I2C bus)...PIC16F1824. the goal of project is to read the sensor data(I2C bus) and send via RS385 MODBUS protocol. I can share the schematic. I have hardware and PICKit3. after you make firmware, i will test on my board and pay to you.

    $1302 (Avg Bid)
    $1302 平均报价
    7 个竞标

    I have a custom Firmware that runs on my device, but the custom firmware doesn’t have the settings app and it’s disabled at the same time, so my need is that I will provide you with the firmware img file and I need to re-install the settings and google play. So I can access to WiFi and so on

    $1012 (Avg Bid)
    $1012 平均报价
    4 个竞标

    Your job will be to completely design a single PCB with a microcontroller (schematics, firmware, Gerbers, BOM) that will perform the following actions: 1. Read measurements from two sensor with I2C protocol 2. Use the readings to drive an AC motor as specified according to this application note AN308 by ST Microelectronics - TRIAC analog control

    $3069 (Avg Bid)
    $3069 平均报价
    27 个竞标

    ...development for a small household appliance (in positive case, I must be able to pass CE quality certification): - optimal solution have to be checked together; - simple testing firmware included (eg: C, Lua,... I have already coded some working example); - files available for further use (eg: for KiCad); 2- prototype PCB produced in small testing series

    $3208 (Avg Bid)
    $3208 平均报价
    40 个竞标

    i am working on project where I need electronic design engineer with latest electronic knowledge and write firmware for the same. Design of sensors, firmware, software to display the output which involves IMU, High Speed data logger with Memory.

    $3185 (Avg Bid)
    $3185 平均报价
    9 个竞标
    checking firmware 已经结束 left

    ...service could be responsible to check the integrity of the firmware of IoT gateways and devices. The service scans the pre-OS (firmware) of devices against a whitelist of approved firmware and, by using ML/neural net techniques, will check the integrity of firmware, ensuring that only approved firmware is operating and blocking untrusted updates. A Neural

    $1216 (Avg Bid)
    $1216 平均报价
    4 个竞标

    I would like to hire an experienced electrical engineer with wide know-how and advanced understanding of the current GSM & GPS and/or Satellite technologies, who can design and build a vanward prototype of GSM & GPS Tracking Device with the following characteristics: * as small, as possible in regards of the PCB (electrical circuit board) dimensions;

    $11775 (Avg Bid)
    $11775 平均报价
    4 个竞标
    firmware checking 已经结束 left

    ...service could be responsible to check the integrity of the firmware of IoT gateways and devices. The service scans the pre-OS (firmware) of devices against a whitelist of approved firmware and, by using ML/neural net techniques, will check the integrity of firmware, ensuring that only approved firmware is operating and blocking untrusted updates. A Neural

    $1239 (Avg Bid)
    $1239 平均报价
    3 个竞标