Painted wall murals工作

I am in need of a licensed Professional Engineer (PE) to review a detailed drawing for a retaining wall. Your main task is to review a retaining wall design that will serve as an effective erosion control solution. It's essential that the design is structurally sound, sustainable and meets all relevant regulations. Key Requirements: - Experience in designing retaining walls for erosion control - Proficiency with AutoCAD or similar software - Understanding of building codes and regulations I would like the final drawing to be stamped by a Professional Engineer, certifying its structural integrity and compliance with codes.

For a lawsuit we need some technical over viewing and stress report .about this floating stair with only one stringer fixed on a wall of bricks.

...talented 3D rendering professional to provide a detailed and appealing visualization of a modern-inspired living and combined kitchen in a small room Specific Requirements: - Include a 2 seater sofa , coffee table, and dining table and 2 chairs desk and office chair similar to the photos provided and a refrigerator in the space provided in the plan. The wall colour is white. Some artwork on a wall if possible Wall mounted tv 50 inch on wall between bathroom and desk area - Provide high-quality and realistic render. Ideal Candidate: - Exceptional 3D rendering skills. - Proven experience in designing modern interior spaces. - Excellent attention to detail. - Ability to work according to given specifications and meet deadlines. This project demands not j...

I'm in need of a structural engineer or architect who can assist me in calculating the load-bearing capacity of a wall in my residential property. Key Requirements: - The wall in question supports the structure of a single-floor residential home. - The calculations are to be based on the use of Laminated Veneer Lumber (LVL) material, a common choice for load-bearing constructions. Additional Information: - Your expertise will be crucial in ensuring that the building remains structurally sound post modifications. - Ideally, the professional should be familiar with residential properties, and have experience in load-bearing wall calculations using LVL.

...the complex should be easy to use also for walking, cycling, pedal karting, running. (*as i wrote earlier, it's important for us to be able to have educational courses for kids regarding traffic signs, road education, safe and defensive road walking/driving so, we can use these alleys to do that and make the alleys be the car route for traffic education with traffic stops and traffic signs and painted roads (see the legoland track in Germany - it has this kind of activity for kids) NOTE 7 - VERY IMPORTANT: for clarity and for not having any misunderstandings, i require that you provide a sample of quality work (*from other projects, it does not even needs to be yours) before we get into a contract. For each type of file that needs to be delivered, i want to have a sample upf...

I require a professional to inspect a small wooden stud wall in my shower room. The aim is to determine whether it is structural or not as I am uncertain if it supports any load-bearing structures or fixtures. - The ideal candidate should have a proven track record in structural engineering, specifically related to wood construction. - Prior experience in assessing load-bearing structures is imperative. - A keen eye for detail, comprehensive reporting skills and ability to provide tangible conclusions following the examination are essential. Pictures of the small stud wall with Velux above, and same size Velux in the adjacent bedroom, attached

I'm looking for a skilled individual who can help me set up an ETSY shop specifically for selling ...Proven experience in setting up and customizing ETSY shops - Familiarity with Printspace or similar dropshipping services - Ability to optimize the shop for SEO to increase visibility and reach - Strong communication skills to keep me in the loop with the progress Tasks: - Create the shop - Manage to upload some products (10 max. at the beginning); use of Photoshop to showcase the pictures in a wall. - Create banner, and miniatures - Create logo of the shop I'm open to suggestions on how to make the shop more appealing to potential customers. Your creativity and expertise in design and user experience will be highly appreciated. Please provide examples of past ETSY sho...

I have a completed project of a wooden fence on a concrete retaining wall. I require a thorough assessment of seismic wind load analysis for the fence. The purpose of this analysis is to check for code compliance, specifically to meet the standards required by the El Cajon city due to the height of the fence. The ideal candidate would be proficient in: - Seismic wind load analysis - Code compliance for the city of El Cajon - Assessing fences on concrete retaining walls Your analysis will help ensure the fence meets the expected regulatory standards. I've attached a photo of the fence at its highest point.

Additional backgrounds added to furniture photos with realistic living room wall and floors behind it.

I have a small-sized picture that I am looking to resize and redesign to fit on a backdrop wall for a corporate event. The contractor should be able to print the design without any further resizing. The key requirements for this project include: - **Resizing**: The picture needs to be resized to fit the size of a backdrop wall. - **Redesign**: The picture should be redesigned with few touches to fit also the backdrop wall The ideal freelancer for this project should have a strong background in graphic design, and be able to work within set dimensions and color schemes. Experience with corporate event visuals, and an eye for minimalist and modern designs would be a plus.

I would like designs for two signs made. For the first sign, please use the text below (SIGN 1), the attached logo, and QR code to this link - For the second sign, please use the text below (SIGN 2) --------------- SIGN 1: Help Us Paint a Greener Future! Get your face painted for just 1 EUR, and support a great cause! For every face painting, 1 EUR will be donated to Let's Make Cyprus Green, an environmental NGO dedicated to creating a cleaner and greener Cyprus for all. Let's add a splash of color to your day while making a positive impact on our planet. Join us in painting a brighter future, one face at a time! Thank you for your support! --------------------- SIGN 2: Smile for the Camera! Please be aware that this event is being photographed

I'm in search of a motion gra...accessories reseller. The graphics are intended for use in an outdoor LED wall, for brandwareness and product showcase, so visual appeal and visibility are key factors. Key Requirements: - Proficient in creating captivating 2D animations and kinetic typography. - Experience in designing content for large outdoor LED walls is highly preferred. - I will provide 3D video / png sequence for certain timeframe The project is a short one, less than 30 seconds in duration, which makes it crucial for the designer to be able to convey messages effectively in a limited time frame. If you have a strong portfolio that demonstrates your expertise in both 2D animation and kinetic typography, and ideally experience with outdoor LED wall content, I�...

I'm in need of assistance with a thorough inspection of my home, specifically focusing on the wall where an awning is to be attached. The project requirements are: - Inspecting the wall's structural integrity - Providing recommendations for securing an awning safely to the wall The perfect candidate for this would have experience and skills in: - Home inspections with a focus on exterior structures - Extensive knowledge of home construction and wall structures - Expertise in attachment of outdoor fixtures and elements such as awnings This inspection is crucial prior to attaching the awning to ensure safety and long-lasting placement. I look forward to your expert advice and assistance.

请注册或者登录后来查看详情。

I'm constructing a small granny flat with 1-2 bedrooms, utilizing brick as the primary material. The project involves essential engineering tasks, specifically for the footings, wall structure, and the roof. The ideal freelancer for this job should have experience in: - Structural Engineering: Proficiency in designing and planning the footings, wall structure, and roof for small buildings. - Brick Construction: Understanding of the particularities of building with besser block bricks, ensuring appropriate support and load-bearing capabilities. - Energy-Efficient Design: Ability to incorporate energy-efficient features into the structural engineering, maximizing sustainability and cost-effectiveness. The successful candidate should be able to provide detailed engineerin...

...Aand then for me to weld into a box using a handheld welder. The end goal is to produce a hinged metal box. (and I will use a service like this one to make the parts: Here is what the project entails: - The overall dimensions of the box are rough, but it's 1x unit wide by 2x unit long by .5x unit high. x=5ft - The types of steel to be used are 1" square tubing with 1/8" wall thickness, 20 Gauge steel, and 16 gauge steel. - for the hinged joints, I am planning to use weld-on hinges, which will be sourced locally by me. The perfect candidate for this role is: - A self-starter with a clear understanding of CAD designs for CNC machine - Experienced in working with steel The 45º corners will be made of 16 guage steel with the 20 gauge flat panels lap welded ont...

I'm looking for a qualified structural engineer to assist me with a letter. The letter aims to give me permission to place a deck post on top of a basement retaining wall. The specific requirements include: - **Knowledge of Structural Engineering:** The ideal candidate should have a solid understanding of structural engineering principles to assess the feasibility and safety of the proposed deck post placement. - **Experience with Structural Analysis:** Since the basement retaining wall's load-bearing capacity is uncertain, the engineer will need to analyze the structure and determine if it can support the additional load of the deck post securely. - **Proficiency in Professional Communication:** The engineer's primary task will be to draft a clear, detailed, and p...

I'm seeking an archite...options such as adding porches dormers and other options to the design to modify it to suit our clients needs. I currently have a designer but she is not able to keep pace with getting our designed out quickly. We typically like to have a turn around time on our preliminary plans of 2 weeks and to be through finals within 5 weeks from sign off on preliminary plans. We then take the plans and design wall shops in HSB. If this is something that you would be interested in discussing more please let me know. Please include in your proposal: - Your relevant portfolio. - Any experience or knowledge you have in panelized building systems. - Your estimated timeline for the project. I have attached an example of a finished plan we've designed and wi...

I'm in need of an expert in foundation design and architectural drafting to help create a detailed cross-section drawing of a rat wall foundation. The project specifics are as follows: - The drawing should depict an 8x8x16 CMU Block laid on an existing slab - It should also illustrate 2x6 framing on top of the block with U-bolts connected - A detailed diagram of the hold down bracket is also expected You'll be providing the drawings in PDF format. Please note that no specific type of rat wall foundation has been preferred, so the decision hinges on your expertise and suitability for the project. It's vital that you're proficient in architectural drafting, have an understanding of foundation design principles, and are able to work accurately from specific...

I'm looking to hire a skilled and creative graphic designer for a 5 meters wide by 2.5 meters tall trade show stand wall design. The purpose of the design is to showcase our company's branding in a modern style. Key requirements: - The design should prominently feature logo and slogans as key visual elements - It should be set in a modern style, representing our forward-thinking brand identity - Familiarity with traditional trade show designs is a plus, but we are open to fresh and innovative ideas Ideal designer: - Previous experience in designing trade show stands or large-format graphics - Strong ability to interpret a company's branding into visual designs - Proficient in modern design aesthetics Please note accuracy to our brand identity is paramount as the t...

...seeking a skilled architect to support my renovation project in NSW, Australia. We have acquired a new property, built in 2008, and are looking to make some slight enhancements to it. The proposed changes primarily focus on the front of the property. We intend to extend the left side of the garage by approximately 40-50cm (so it aligns), construct a roof across the current balcony, and raise the wall above the garage by 80-100cm (with planter boxes). Additionally, we are considering the installation of a small plunge pool. To facilitate the design process, we have obtained the old approval file from the council, which includes the current plans. Furthermore, we have prepared a 3D render illustrating our vision for the renovations. This job includes: - Design & Drafting...

Need back ground changed, so I can place a nice picture on the wall, last pic just want the dogs with no signage in the middle and dogs positioned closer together. Looking for inspiration for these pics. Our dog passed last night and our like a nice picture on the wall

I need a logo and a website background (wall paper) images for my Property Management Business (Harvard House) For the background image my idea is to create an image similar to the monopoly board, but with names of streets and places in Albuquerque. The most prominent and focused square on the board should be the one labeled Harvard (1) It'd be the square first or second to the right of the corner. (see pic). I'd also would like the board to be angled much like in the pic. If you have a better idea to that angle, I'm open to better ideas to make the Harvard square pop. I was also thinking that maybe only 2/3 or less of the board is visible? Like only the top left down 2/3 to the bottom right visible?(does that make sense?) This will be a background for my website ...

I need an experienced draftsman to help me secure the necessary permits for a 10-foot-high wood wall that will be placed 10 feet from my property line. Additionally, I require permits for the installation of solar-powered lighting on the wall. Key Requirements: - Pull permits for a 10-foot-high wood wall 10 feet from the property line. - Pull permits for the installation of solar-powered lighting on the wall. Ideal Skills: - Experience in drafting and securing permits for construction projects. - Understanding of building codes and regulations. - Knowledge of solar lighting installations and related permits.

As a seasoned AutoCAD user, I've hit a wall on one specific task that I need help with. I am currently using the 2021 version of AutoCAD and require an expert user to assist me with drafting a brand new plan. This project involves the drafting of a simple block design, reflecting a process that should be relatively straightforward for an experienced AutoCAD user. Given this, I anticipate that the task will take no more than an hour to complete. Ideal Skills and Experience: - Proven experience as an AutoCAD user, preferably with certification. - Familiarity with the 2021 version of AutoCAD. - Experience in drafting a variety of plans. - Accuracy and attention to detail. If you meet this profile and are available for a quick turnaround, this could be an easy gig for you. Thank...

...of requirements, and effectively communicate such concept with the client. - Attention to detail during the analysis and in the work results. - Experience in the full architecture design process. - Experience in designing with various construction materials, building systems and architectural styles, especially: reinforced concrete, hollow ceramic brick, ceramic roof tiles, metal sheet (sandwich) wall and roof cladding, - Understanding of the related engineering disciplines (structural, mechanical, electrical, energy efficiency, thermal management), in order to facilitate their integration into the design at the concept stage and design development stage. - Proficient use of AutoCAD and BIM professional tools that allow fast and efficient 3D architectural design. *Miscellaneous...

...are to have grey carpet as shown in the photos, except bathrooms and the main entrance and rear entrance of the property which should be tiled. Water is to be supplied from boreholes and water is purified and stored on the roof of the property, solar water heater, and pump, and septic tank are to be dug out for human waste, rain water harvester, and 2x waster storage tanks on the roof. The outer wall should have a gatehouse with a draw bridge, a draw bridge to be raised by the 2x electrical motors but a manual way to raise the bridge is essential in cases of motor failure. security cameras to be fitted to the exterior of the property to cover 360 of the property and cover all blind spots, all cameras to have IP68 water resistance and night vision, infra-red, motion detectors, c...

Have a logo in mind for a vehicle Safari and adventure company in Saudi Arabia Similar to what is in the presentation attached, but would like it a bit more detailed and more customized. Tried to get the theme of something that is carved into a rock, like a relic. I am also open to options where it looks like its painted on (with paintbrush) Should work with back and white back grounds, Need formats that are suitable for online, and printing (vehicle branding)

I am seeking a skilled artist with a solid understanding of realist artwork to produce a stunning wall design for my restaurant. The main purpose of this project is to display artwork that enhances the ambience of my diner. - Artwork Style: The designated artist should specialize in realist art. Your portfolio should demonstrate a strong ability to evoke emotion and thought through realistic portrayal of subjects. - Subject Matter: Rather than traditional food items or landscapes, I am keen on having historical figures as the subject matter. You should possess knowledge or willingness to research these figures to render them accurately. Ideal candidates are those with previous experience in large-scale projects, and a knack for translating abstract concepts into compelling visu...

...and Clipper Blades: Highlight the quality of our grooming tools, ensuring precision and safety for pets. Glass Front Cages: Showcase our transparent cages, reflecting our commitment to transparency and openness in our services. Pneumatic Grooming Tables: Highlight the innovative feature of our grooming tables, showcasing their functionality and convenience. Mural Wall Arches: Showcase the artistic and visually appealing mural wall arches, adding to the aesthetic appeal of our establishment. Interior Design: Highlight the overall ambiance and design of Woof & Wag Bayview, Sucat, showcasing a welcoming and comfortable environment for pets and owners alike. Creative Direction: The videos should evoke a sense of joy, warmth, and excitement, capturing the bond between ...

...an architect who can provide the necessary drawings for the removal of a wall between my kitchen and living room. We also want to replace the window with a patio door as per attached sketch. These drawings are required for a planning permission application (Building Warrant as the wall is load bearing, West Lothian Council). Requirements: - Incorporation of specific features: The new open space should ideally incorporate an island counter or a breakfast bar, and/or built-in shelving. Open to recommendations to ensure a cohesive final layout. - Wall size: The wall that needs to be removed spans approximately 5 meters. The architect must ensure that the new design is structurally sound and aesthetically pleasing. The wall is load bearing and a structur...

We aim to develop a comprehensive social media website. In addition to a standard user interface including user profiles, a newsfeed, and a messaging system we also want the site to support a pay wall and a video chat feature. Our site will not be complete without a web shop, the specifics of which can be discussed in further detail once the project commences. Ideal Skills and Experience: • Experienced in building interactive social media platforms • Proficient in the implementation of pay walls • Knowledge of setting up video chat functions • Have worked on the integration of web shops within an existing platform • Familiar with best practices for user profile creation and messaging systems It's preferable if you have created a similar site before, bu...

I am looking for a graphic designer who can design wall banners for a company. Depending on the work submitted, I would also like to give a continuous flow of graphic design works. Preferably on Adobe photoshop or illustrator Share your portfolio, if you are interested in taking this task.

WARNING: If you have low or no experience with OpenGL,...(WASD), mouse movement, jump & crouch. 5. Collision. 6. Press esc to show mouse and a basic pause screen (don't pause the game, just show an overlay) and press esc again to hide mouse/menu. 7. Ability to shoot & show ammo ui to show how many bullets you have left. 8. Ability to reload (no animation, just lower the gun and then raise the gun after 2 seconds). 9. Bullet collisions when you shoot at a wall (just use a grey square for this). 10. Friction so that when the player releases a movement key, it will slowly grind to a halt instead of instantly stopping. Notes: 1. Clean code - messy/poorly organised code will be rejected. 2. Must use CMake. 3. Delivey method is github. 4. Must be able to build and run on win...

I'm in need of a distinctive, modern yet minimalist logo for our new business venture, a regenerative farm named Fat Donkey Farm. Key Elements: - The dominant colors should be white, and black, but I am also open to neutral/earth tones. - Also, I'd like to incorporate some specific symbols into the design, specifically, the Colorado State University "A" (painted on the foothills above Fort Collins), a fat donkey, Horsetooth rock, vegetables, and a bicycle. I've attached images of the A, Horsetooth rock, and a Donkey to assist. The symbols are attempting to ground our farm in the place of Fort Collins, Colorado. Ideal Skills & Experience: - Proven experience in logo creation, focusing on modern and minimalist designs. - Strong artistic ability to in...

...help with is to generate the exact set of working drawings, using 1 and 2 above. I need to show exact measurements (in 2D and 3D) that I can give my carpenter and light contractor for execution. I will ideally require 6 to 7 sets of drawings (maybe 1 or 2 more): changes to master layout plan dimensions if needed main wardrobe small wardrobe lounge area wall design book nook shelves balcony wall design bed working drawing bedroom main wall design working drawing TIMELINE: We can proceed with the drawings one by one - in milestones. I may require one set of revisions if some dimensions are wrong. *If this sounds of interest to you, please begin your application with the words "Hi AutoCAD" so I know you have read this whole brief.* Experience with r...

I'm looking to transform my small-sized hall into a multifunctional yet inviting space for daily living. Here's what I envision for the project: - The hall must be designed keeping two sides open. - Merging indoor with outdoor, one side should incorporate plants viewable and accessible both from inside and outside. - The other side must have a semi-open design with half wall and half sliding window. - The hall should incorporate two entrances/exits and a designated area for a mandir (a sacred space for prayer). - I do have some color scheme in mind for the layout of the hall, but I would prefer to discuss it on a call. Ideal freelancer's skills and experience: - Interior design experience, specifically with small spaces. - Understanding of how to incorporate elemen...

... More specifically, I'm looking for a piece of art that can be used for a mural on a medium-sized wall. Key Requirements: - The art style I am looking for is realistic, so you should have a strong portfolio showcasing your ability to create lifelike images. - The color scheme should be bright and vibrant, ensuring the mural is eye-catching and impactful. - The mural will be medium-sized, so you should be able to work with the size parameters of 10-20 feet. This is crucial to ensure the final piece is not only visually striking but also proportionate for the intended space. Ideal Skills: - Proficiency in digital art creation, specifically in a realistic style. - Experience in designing murals or large-scale art pieces. - Ability to work with a bright and vibrant colo...

I'm exploring an office to flat conversion in Twickenham. Since the building is over a century ...The building's age might make this a more complex task, hence the need for someone with experience in older properties. - No access to original plans: Since I don't have access to the original architectural or structural plans, the freelancer will need to assess the building on-site. Ideal Skills and Experience: - Structural engineering or architecture background with experience in load bearing wall assessment - Familiarity with older buildings, particularly those over a century old - Able to carry out on-site assessment without reliance on original architectural plans It is important that the freelancer can provide a comprehensive and reliable assessment to guide the o...

...[Illustration: Rusty and Sky huddled together in the snow, the garden covered in a blanket of white. Despite the cold, they are smiling, enjoying each other's company.] Text: When winter arrived and covered the garden in a soft blanket of snow, Rusty and Sky stayed close, keeping each other warm with their friendship. Page 8: [Illustration: Rusty and Sky sitting together as the sun sets, the sky painted in shades of pink and orange. They are looking out at the garden, content and happy.] Text: And as the sun set on another day, Rusty and Sky knew that no matter what adventures lay ahead, they would always be there for each other, sharing their lives and their friendship under the watchful gaze of the oak tree. Page 9: [Illustration: Rusty and Sky waving goodbye to each other...

I DO NOT WANT DIGITAL ART. LOOKING FOR HAND PAINTED. I am looking for a talented artist who can recreate a large canvas (24x36 inches) painting from a photo I will provide. The requested style is realism. Project Details: - Size: Large canvas, specifically 24x36 inches - Style: Realism - Subject: I have a specific image in mind that I will provide. Skills Needed: - Proven experience working with realism style painting - Experience in painting detailed large sized canvases - Strong ability to recreate images accurately In your bid, please include a sample of your previous work in realism and any experience you've had with large scale paintings. Looking forward to working with a passionate artist.

Home owner, I am seeking an experienced electrician to design/specify new circuits after a panel upgrade from 100A to 200A (done recently- stucco wall still open). This task requires careful consideration on how we can prepare for the addition of future circuits before stuccoing the exterior wall again- as well as designing the circuits. This would include a subpanel in the garage. Work to be done by myself, a 50-year veteran truck and car mechanic, welder, and general DIY guy. Key Details: - The primary goal for this upgrade and the garage subpanel is to meet increased power demand and lay groundwork for adding new circuits in the future. - I anticipate needing 7 or more extra circuits for future use. - I am interested in adding a Level 2 car charger in the garage for pe...

...captures the essence of modern Gothic architecture. The final design should be a fusion of timeless gothic elements with modern-day flair. Key Project Specifications: -*2 story home with space for a future elevator or lift. - Design Type: The project focuses on creating a residential Construction Floor Plan with 8 in. concrete exterior walls. Total square feet NOT to exceed 1400sf. - Interior wall will be using concrete blocks 4"W x 6"L - *Prefer Monolithic slab 1-2ft above ground level - Style: The design preference leans towards a modern Gothic style, combining sophisticated elements of Gothic architecture with modern design subtleties, open floor. - Room Count: The floor plan should incorporate 2 bedrooms, 1 master bath with Walk-in shower, double sink and NO ...

I am looking for a muralist to paint several champagne bubbles on an exterior wall. Key Points: - The surface to be painted is NOT flat. The surface is brick, with relatively deep grout. - The artwork should be your best rendition of champagne bubbles (opposed to soap bubbles). - The wall is about 10ft tall and about 100ft wide (exact measurements on request). - The mural is to be painted the full-length of the wall, end to end. I'm seeking a creative individual who has: - Proven experience in comparable artworks. - A good understanding of working with exterior surfaces and suitable painting materials. - The ability to interpret and incorporate specific theme requirements. (sharp lines and round circles)

I'm looking for an experienced artist who can create a realistic portrait of my wife and kids. I'd like them to be painted into the style of Labille-Guiard's "Mother Nursing". Key Requirements: - The painting should be done in a realistic style, capturing the essence of the original artwork by Labille-Guiard. - The faces of my wife and kids should be incorporated seamlessly into the painting, ensuring they are recognizable but also fitting within the context of the original piece. Specifics: - I intend to use this as a personal gift, so attention to detail and creativity is vital. - The painting should be in the original color scheme of Labille-Guiard's work. Ideal Skills: - Proficiency in realistic portrait painting. - Experience in incorporating el...

I need a logo for my new wall art business brand called "Mansa Arts". I'm looking for a text-based design that will help establish the identity of my wall art business. The look and feel of the logo should match the nature of my brand. Ideal Candidate: - Experience in creating text-based logos - Understanding of brand identity - Creative and able to translate the brand's essence into a logo.

...is a special, vibrant dragonfly-themed memorial to honor a loved one's passing. Our mutual friend passed away and shortly after my friend began seeing dragonflies specifically a red ones. She also enjoys blues,greens, and blues orange ones. I’d love if somehow we can incorporate angel wings or a divine crown and rest in peace Mike into this design as well. I am looking for something hand drawn/ painted as it would be for personal for this project. Ideal Skills and Experience for the Job: - Proficient in painting, with a strong portfolio of previous work - Experience in memorial or sentimental pieces is a plus - Ability to work with bright and vibrant color schemes - Understanding of the emotional sensitivity of memorial pieces - Attention to detail to capture the ess...

I want a sign writer that can sign write two scooter panels to look like the signage was painted 30 years ago so it looks aged as the scooter is very old Simple wording designed in Italy, left for dead in Deli rescued given a new heart and now being thrashed on the streets of England

I need a designer who possesses a modern outlook to redesigne my apartment. I'm aiming to resize the living room so I can get an extra bedroom. Looking for a creative way to do it. The requirement of bedroom needs to be at least 6 square meters and have a Window. The wall between «stue/kjøkken» and «innredet rom» and «soverom» can be removed.