...expertise in the Local Area Network (LAN) infrastructure for troubleshooting and optimization. Key Tasks: - Install, rack, and stack a Cisco Catalyst 8300 series device. This includes unboxing, physical mounting, and initial power-on to ensure the device is operational. - Network Troubleshooting: The freelancer should be able to identify and rectify any issues affecting the LAN's performance. - Installation: If necessary, the engineer should help in the setup of new equipment or software for the network. Ideal Candidate: - Proven experience in LAN network design and architecture. - Strong troubleshooting skills and experience in network optimization. - Good knowledge of network security will be a plus. Please note that the project involves local area network (...
...areas such as C++ programming, the QT framework, and user interface design. Key Skills & Experience: - Strong proficiency in C++ - Extensive experience with the QT framework - Excellent User Interface (UI) design skills - Knowledge in Python and 3D will be a plus The main function: 1: Windows platform, jointly developed by QT+python. 2: Communicate with hardware devices through serial port/Ethernet. 3: Support MODBUS-485, TCP, UDP and other communication protocols, with 1ms cycle response. 4: Support hardware parameter configuration, multi-channel data analysis, storage, data playback, and support real-time data curves at different communication rates. 5: Supports local and cloud dual storage. 6: Port a Python data analysis open source library (provided by us), which need...
Hi, this is the first milestone for the new project. It's just a review of the topic. 1. Initial project review £20. I know you’ll need to spend some time researching the ethernet interfaces. I think it’s best that we aim to produce a Modbus TCP interface. I’m paying you to spend some time looking into that. The idea is to find any problems with the approach I’m suggesting before we start.
...expertise in the Local Area Network (LAN) infrastructure for troubleshooting and optimization. Key Tasks: - Install, rack, and stack a Cisco Catalyst 8300 series device. This includes unboxing, physical mounting, and initial power-on to ensure the device is operational. - Network Troubleshooting: The freelancer should be able to identify and rectify any issues affecting the LAN's performance. - Installation: If necessary, the engineer should help in the setup of new equipment or software for the network. Ideal Candidate: - Proven experience in LAN network design and architecture. - Strong troubleshooting skills and experience in network optimization. - Good knowledge of network security will be a plus. Please note that the project involves local area network (...
I'm seeking a well-experienced developer who understands STM32 and IoT. This job focuses primarily on Ethernet connectivity to achieve optimal functionality. While not necessary I will favor developers who have the hardware at hand and can test themselves before finalizing the project. Any prior experience in Embedded development, File transfer, Network communication would be an added bonus. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds and protocols. - STM32 and W5500 modules at hand You...
...professional to assist me in setting up a Local Area Network (LAN) with the primary purpose of facilitating easy file sharing among a small number of devices, specifically less than 10. Key requirements: - Establish a Local Area Network: The main goal of the project is to set up a local network that ensures a seamless connection among the devices for file sharing purpose. - Secure File Sharing: The network should be configured in a way that file sharing is secure and only accessible to the authorized devices. - Minimal Device Connectivity: As the network is intended for a small group of less than 10 devices, the setup should be simple and efficient without compromising security. Ideal Skills: - Networking Expertise: A deep understanding of LAN setups and configurations i...
I'm seeking a professional who can assist with the setup of my SonicWall 270W firewall in my home network. Key Requirements: - Installation and configuration of the SonicWall firewall - Three LANs segmented to support: IoT LAN, Work LAN, and HomeLab LAN. - Setup Sonicwall VPN - Implementing network security best practices - Ensuring seamless network connectivity post-installation Ideal Candidates: - Previous experience with SonicWall firewall setup - Strong understanding of network security principles - Ability to handle a variety of devices and ensure their secure connection to the network - Proficiency in troubleshooting network-related issues and devices. Your proposal should include a clear outline of the steps you plan to take, as well as an estimate of t...
I need a desktop application that can be run on Windows machines over a local area network (LAN). The primary function of the application will be to gather specific details about the computers on the network. Key Features: - The application should collect and store information such as MAC address, IP address, and disk serial number. - The user should be able to enter a computer name to retrieve and store the relevant details in a dedicated file named ''. Ideal Candidate: - Proficient in Python - Experience in developing desktop applications for Windows - Knowledge of networking concepts and system information retrieval - Familiarity with data storage and file handling in Python .
As a thriving business, maintaining the health and security...facets of the project include: - Analyzing network security: We need a professional understanding of our potential vulnerabilities and the advisable improvements to ensure optimal security. - IT infrastructure: The focus should be on our existing Local Area Network (LAN) and Wireless Network. Familiarity with these infrastructures is thus key. - Access Control: The review should delve into our implemented security measures – primarily access control. Recommendations for enhancing our current setup are expected. In-depth knowledge of LAN, Wireless networks, and access control security measures is highly desirable, as is a keen eye for detail. By the end of your audit, we anticipate a safer, more secure, and r...
...Azure Active Directory (Intra AD), Intune, AutoPilot, Group Policy, Access/Identity Management, AADS, Federation Services, Domain Controllers, etc. for medium to enterprise environments. Networking: Provides project design + implementation and high-level troubleshooting for networking infrastructure, including: Routing, switching, firewalls, WAPs, VPNs, load balancers, etc. in medium to larger LAN/WAN environments, including cloud environments (Azure, Amazon AWS). Provides senior consultative services and project work for Professional Services clients with a particular focus in Modern Workplace and Automation: Defines and completes project tasks, including scripting, related to workplace automation, leveraging Intune, SharePoint, Viva, Microsoft Fabric (PowerApps, Power Automa...
...process control system. Key Points: - Model: 100-PLC-010/020 - Purpose: Process Control - Required Communication Protocol: Ethernet/IP Your responsibilities will include: - Setting up the PLC in a way that ensures the smooth operation of the process control system. - Configuring the system to align with the required Ethernet/IP communication protocol. - Conducting thorough testing to ensure the system performs efficiently and effectively. The ideal freelancer for this job should have: - Proven experience in PLC programming, with a focus on process control systems. - In-depth knowledge of the 100-PLC-010/020 model. - Expertise in configuring PLC systems to integrate with Ethernet/IP communication protocols. If you believe you have the skills and experience to s...
I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.
I'm in need of a proficient PHP developer to create a custom code for communicating with an Ingenico POS terminal via Ethernet. Here are the specifics of the project: - **Communication Method:** The primary method for the communication is through Ethernet. You need to be well-versed in this type of communication to tackle this task efficiently. - **Transaction Handling:** The main purpose of the code is to transmit the amount to the terminal and verify if the transaction can be successfully processed. **Requirements**: - experience in PHP - Prior experience with Ingenico POS terminals or similar devices is a plus Please note that this project is solely for the communication between the system and the terminal. There is no need for integration with the banking systems...
Hi Aryan R., these are the two projects: 1) adding Rongta network ( Ethernet and wifi ) connection - Milestone 1 : $200 2) Changing invoice and payment page template to show slide show on the half left side : Milestone2 : $50
I need a highly competent developer experienced in RS232 and RJ45 Ethernet for a specialized project. The principal purpose of this project is to convert serial data to Ethernet data. This data conversion is specifically tailored for Industrial control systems. Key competencies and preferences: - Expertise in RS232 and RJ45 Ethernet. - Familiarity with TCP/IP and Modbus TCP because these are the communication protocols the server host needs to support. - A strong background in industrial control systems development. The desired outcome of this project is a seamless data dialogue between devices via Ethernet. Can't wait for your input.
Description: We are seeking an experienced professional in networking to configure a Site-to-Site connection using OpenVPN Cloud Connexa between two distinct...objective is to establish seamless communication between two separate networks for efficient data transfer. T Key Details: Objective: Enable communication between two separate networks for seamless data transfer. OpenVPN Cloud Connexa Experience: Substantial personal experience with the platform. End Result: Connect two different devices, each with a private network, via Team Viewer private LAN. This connection should be established without any public access, ensuring privacy and security. Ideal Candidate Skills and Experience: Proficiency in configuring Site-to-Site connections. Experience with the OpenVPN Cloud Connexa...
I'm seeking a knowledgeable network architect with proficiency in Cisco packet tracer to design a comprehensive network architecture for our global enterprise. This project consists of five distinct networks that should be expertly interconnected. Each Global Enterprises office will have its own Local Area Network (LAN) designed to provide network connectivity for all devices within that location. These LANs will be interconnected to form a Wide Area Network Key Features you will implement: - Firewall Configuration - VLAN Setup - VPN Configuration - Routing Protocol Configuration - DHCP Server Integration - Intrusion Detection and Prevention Systems (IDS/IPS) For monitoring and management purposes, it is crucial that a successful ping request can be made. Furthermore, ...
I'm looking for a highly skilled network architect to craft both a Local and Wide Area Network (LAN and WAN) designs tailored to support less than 50 connective devices. Mostly, your design should focus on facilitating seamless Internet access. The chosen freelancer should; - Be well-versed in LAN and WAN design and implementation - Have a deep understanding of network security to ensure the created network is impervious to threats. - Possess solid report writing ability to produce clear and concise documents outlining the network structure. The ideal freelancer should posses a wealth of experience in network security, LAN and WAN design, and report writing. Your work will not only be designing, but ensuring that the design is well implemented and impregnable to...
Ho la necessità di integrare lo scambio importo tra alcuni gestionali e i POS tramite lo scambio importo. Servirebbe sviluppare un modulo in java per dare continuità ai progetti in essere. Il protocollo di comunicazione deve essere il protocollo 17 o il 39. I gestionali sono installati su pc windows e i pos sono collegati su rete lan. Chiederei di essere contattato solo da persone che lo hanno già fatto.
Zeek ntrusion Detection System - in Ubuntu https://youtu....system on a virtual network. - Based on the project goal, the emphasis is on monitoring network traffic efficiently. - The type of network traffic to be monitored was not specified, thus a capability to monitor both LAN and WAN traffic would be ideal. Required Skills & Experience: - Proficiency in network monitoring and security. - Extensive experience with setting up and configuring the Zeek intrusion detection system. - Solid knowledge of virtual networks. - Without a clear direction on the type of traffic to be monitored, a broad perspective is essential, to handle both LAN & WAN traffic. Your bid should demonstrate your experience with intrusion detection systems, specifically Zeek, and your understan...
...contractor has already set up Ethernet cables and a patch panel. Ideally, you will have tools in case one of the jacks doesn't work it can be tested and crimped quickly instead of having to reschedule the cabling contractor. 4. Install a 24 port PoE switch (provided) on a rack and connect patch cables (provided) to the switch (need screwdriver). 5. Test Internet device provided by ISP and provide our helpdesk with SSID, password. 6. Cameras were already set up by the construction contractor. Need to connect and configure NVR, connect the cameras to jacks via patch cables and work with our helpdesk to configure DVR. 7. A Raspberry Pi PC will need to be connected to a large TV that is used to scroll advertisements. Assist in connecting it to power, LAN and...
I am in need of a professional who can efficiently handle an RS485 device that requires reconfiguration. The scope of this project includes: - The procurement of a ready-made RS485 to TCP/IP Ethernet serial server converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necess...
...(present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) • HDMI to LVDS signal + backlight • AIS class B • Other UART inputs with optocouplers (to be decided) • GPS • GPIO ports accesss via male connector (compatible with Raspberri Pi) These are the main requeriments, maybe other minor will appear during the design. I can provide schemas for all the parts involved (can bus, LVDS, AIS,...). The job consist in the design of the board merging all schemas in one, and generate all the files needed by JLCPCB or oher manufacturer to produce the board. Ideal skills & experiences: - PCB Design and Raspberry Pi familiarity - Hardware architect...
I am looking for a freelancer to creating a custom carrier board that is specifically designed for Raspberry Pi Compute Module 4. Features: - It should include an Ethernet - Type-C USB port power power. - We're also looking at equipping it with a 4G mobile module (SIM7600 or equivalent that work in Australia/Telstra). - 1 X Sim slot. - 2 X External antenna connectors SMA - 1 X Power LED for CM4 - 1 X Activity LED for CM4 - 1 X Multicolour LED for signal strength of mobile module. - The carrier board should be made as small as possible. Skills and experience: - Freelancers interested need proficiency in electronics and PCB design, along with a deep understanding of Raspberry Pi Compute Module 4. Experience in custom carrier board design and SIM7600 or equival...
I'm in need of a Python programmer who can assist me in gaining a comprehensive understanding of network traffic management in Ethernet switches. I have no previous knowledge in networking or any competence in Python, hence the selected candidate must: - Have substantial experience in Python programming - Proficient in Ethernet switches and network traffic management - Demonstrate excellent teaching skills to a beginner. Please note that this job will not only require you to possess these skills but also have the capacity to teach and explain them simplistically. I am a swift learner. However, bear in mind that I am a novice in this field. Your patience and ability to break down complex tasks into simpler, understandable portion will be highly appreciated.
...storage, workshop and tech area. Laundry, pantry maybe 4x4, kitchen with island and small closet. ***This home is planned to be built in Puerto Rico; must have reenforced columns between 6-7ft ***If possible, have all roof made of concrete and drainage intergraded within the exterior walls. Home wiring to DEMARC output: Fiber Optic 2x CAT6 2x COAX Low Voltage power for DEMARC Media Pannel LAN connections in all Beds, Living, Shop and Office ***Total construction budget $260,000 USD - Not including land or land prep. Ideal Freelancer Skills: - Experience in drafting residential floor plans. - A keen understanding of modern Gothic architecture. - Ability to adhere to project guidelines and deadlines. - Excellent communication skills for progressive project updates. ...
PLZ READ FIRST, i need an absolut expert for a complex configuration 4 esx hosts to 1 opnsense. 1 dmz, 1 secure lan, 1 lan, 1 windows lan working with 4 vswitche und ca 50 portgroups and vlans. 2 opnsense are needed (the secure and lan are on a seperate opn) the job takes around 6 to 8 hours
...STM32 and IoT. This job focuses primarily on Ethernet connectivity to achieve optimal functionality. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. It's not necessary for this project, but any prior experience in File transfer, Network communication, and Remote device management would be an added bonus. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds. Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM32 via SPI, it should connect to ethernet router with DH...
I need a proficien...Temperature, and Uptime. Key Skills/Experience: - Extensive understanding of Python - Familiarity with Luxor firmware and pool APIs - Hands-on experience with Bitcoin ASIC miners' processes Scope: - Develop a software application that interfaces with Luxor firmware and pool APIs - Implement functionality to monitor miner status, specifically Hashrate, Temperature, and Uptime - Configure wifi/LAN port of the development board (banana pi r2 pro) - Integrate external temperature sensors and relay control (hardware interfacing is completed already) The complete boot/control/satefy logic are all completed pointing to the right API to use for each task. The project consist of translating this control logic to python code. I look forward to starting this proje...
Title: Ethernet/IP (EIP) Slave Developer (.NET Core) Responsibilities: Develop an Ethernet/IP (EIP) Slave implementation using .NET Core and C#. Ensure compatibility and compliance with the Ethernet/IP specifications and standards. Integrate the EIP Slave functionality with the provided client for testing purposes. Implement data exchange mechanisms to communicate with the client device using Ethernet/IP protocol. Develop error handling and recovery mechanisms to maintain robust communication between the slave and client. Collaborate with the team to understand requirements and provide input on system architecture and design. Write clean, maintainable, and well-documented code following best practices and coding standards. Test the EIP Slave implementation tho...
I am looking for a freelancer with extensive experience in setting up a connection between Omron CJ2M-33 CPU and Indusoft (Aveva Edge) using ethernet. The goal is to execute control operations utilizing this connection. It is paramount that the successful applicant is competent in operating with Aveva Edge 2020 SP3. Skills & Experience: - In depth understanding of Omron CJ2M-33 CPU - Proficient in Indusoft (Aveva Edge) 2020 V20 SP3 - Experienced in ethernet connections - Knowledge in control operations Please highlight your relevant experience and previous similar projects in your application. Also, please specify which driver will you use and why. This is to ensure that you can provide the level of expertise and efficiency required for this task. Your offer will no...
Elaborar un documento en formato Word que contenga: Un proyecto para revisar el desempeño de una red este Proyecto debe contar con los siguientes requisitos: ➢ Conexión WiFi o ethernet ➢ Equipo con Virtual Box instalado ➢ Equipo con Pandora FMS Community (virtualizado) ➢ Equipo con Windows 10 de 64 bits ➢ Protocolo SNMP habilitado en el equipo con Windows 10 y activo ➢ Agente de Pandora FMS para Windows 10 de 64 bits instalado y activo ➢ Permisos de administrador en el equipo
I am currently seeking a skilled professional who specializes in IDEC PLC programming for industrial automation. The focus of...professional who specializes in IDEC PLC programming for industrial automation. The focus of the project will be adding to an existing program and touch screen. Skills and Experience Required: • Solid knowledge and experience in PLC programming, ideally IDEC software. • Experience in configuring PLC data capture and export to LAN Primary Responsibilities: • Programming PLCs for the purpose of controlling production equipment, data collection and communication to LAN in an industrial setting. • Collaborating closely with our team to understand system needs and operational requirements. Experience with IDEC a PLUS,...
I want to set up the following: 1) Wireguard server on a webserver (Hetzner) 2) Wireguard client on an OpenWRT router What is the usecase? The OpenWRT router is connected to the internet (at different customers) via WAN cable connection and is connected via LAN to multiple printer (pos printers port 9100). The web application can print things on the clients printers. What makes it difficult? Configuration of the customers network/internet must not be needed (just connect OpenWRT router via LAN to the internet). Customers are only using our system single days (they log into our homepage and receipts get printed at their location). Possibility of dynamic IP at the customer, NATed connection, different ISP, no port forwarding etc. Are further jobs possible? Yes, if the protot...
I'm in need of a network exp...workstations in my network and I'm experiencing some issues with LAN connectivity. While I can remote into the workstations and the server, there are some issues I'm facing: - Some workstations are not being found in nslookup - Some workstations are unable to join the domain I've checked the DNS settings on the computers that are unable to join the domain and everything seems to be in order. This makes me believe the issue is with the network itself, and I'm in need of someone who can diagnose and fix this issue. Ideal Skills and Experience: - Proficiency in Windows Server 2016 - Experience with Turris Omnia firewall - Expertise in network troubleshooting and repair - Knowledge of DNS configurations - Ability to diagnose an...
I'm in need of a talented programmer with expert-level skills in CISCO. Specifically, I need assistance in configuring a Local Area Network (LAN) for the purpose of managing our data center. Key Requirements: - Expertise in CISCO programming, particularly in network configuration - Proficiency in setting up and managing Local Area Networks (LANs) - Experience in configuring networks for data center management Please only apply if you have a strong background in networking and extensive experience with CISCO technologies. Your work will be pivotal in ensuring the smooth and reliable operation of our data center.
I need to create a console project in C# Net Framework that I can listen the data from an equipment Mindray BC-20s and / or BC-30s. Using Ethernet configuration and HL7. The data that comes from the clinical equipment needs to be save it on txt file. The configuration is using TCP/IP and I need - Port for every equipment Any questions? I made a console project but I could no be able to get the results from those equipments. I need a person who had been working with HL7.
I'm seeking the expertise of an experienced Ethical Hacker. Your primary task would be: - Conduct a comprehensive vulnerability assessment of a mobile application Here's what you'll need for this role: - Proven understanding and experience with Local Area Network (LAN) systems - Expertise in conducting vulnerability assessments - Solid comprehension of mobile application structures and their potential security weak points. Your mission will be to identify loopholes and vulnerabilities that may exist, in order to uphold our commitment to providing a secure mobile application for our userbase. Your keen insight and detailed feedback on any potential weak points found will be instrumental to our ongoing development and fortification efforts.
I'm looking for a Python expert who can assist me in setting up real-time video streaming and data transfer from Raspberry Pi 5 to a PC over a static network configuration. The project involves an underwater camera and...and background working with Raspberry Pi devices and the picamera2 library. I have the operational hardware setup in my office and can perform the UDP communications however I cant figure out video streaming using the picamera2 library. Everything is working and I can get udp communications between PC and RPI5. The camera on the rpi5 is operational. I am powering the rpi5 through a ethernet-coax-ethernet converters and POE however it behaves exactly as a direct network connection. You will require your own RPI + camera to get your code working then ...
I'm seeking a skilled technician to elevate my Ethernet speed, aiming to significantly improve my PC gaming experience. Currently, I am having trouble with slow download speeds. The perfect freelancer for this project would have: - A comprehensive understanding of internet connectivity for PC gaming - Proven experience in resolving issues related to network speed - Good knowledge of Ethernet-related technologies Main Tasks: - Identify the cause of slow download speeds - Suggest and implement solutions to enhance Ethernet speed - Ensure improved download speeds for smoother gaming experience
...doing a gut renovation of a 4-story townhouse in Washington, DC and I need help designing the internet connectivity throughout the house. I have some ideas of what the network might look like, but I want the guidance of an expert to make sure I don't make any mistakes. My thought is to have the electrician run ethernet cables from each floor to a central location where my modem will be located so I have a hardwired connection on each floor of the house. I would use those ethernet outlets to connect TVs that would stream content from the internet, and I'm also thinking of having a wireless access point on each floor to ensure strong wireless access throughout the house. I need help figuring out the exact equipment I should buy, and to confirm that my wiring pl...
I'm looking for a seasoned electronics engineer to develop a circuit board with a microcontroller with ethernet connectivity, POE power and addressable LEDs, with the design done using EasyEDA software to be fully manufactured by JLCPCB (or equivalent). The core functionality of this project focuses on power management. Your skills and expertise should include: - Comprehensive understanding of EasyEDA software (can take other suggestions) - Proven experience in multi-layer circuit board design - Extensive knowledge in PCB design for power management This project requires intricate knowledge of these areas, so please only bid if you're confident in your ability to deliver. Looking forward to working with experienced and dedicated specialists. Proven portfolio related ...
I've been struggling with getting the internet up and running on my physical RockyLinux server. I chose this OS for its stability and compatibility with CentOS, but I'm unable to activate the i...compatibility with CentOS, but I'm unable to activate the internet on it. I need help from a Linux expert who can guide me through this process. Key Tasks: - Troubleshoot and identify the root cause of the internet connectivity issue - Provide step-by-step guidance to activate Wired Ethernet connection Skills and Experience: - Extensive experience with Linux server administration, particularly with RockyLinux, CentOS or Debian. - Solid understanding of networking concepts, especially with regard to Wired Ethernet connections. - Proven track record of resolving conne...
I'm seeking an experienced professional to chat or talk with for two hours at some time April 4/13-4/18/2024 - who specializes in digital storage and file/document management, probably involving a databa...populated later. . 2-User interface to drag submitted files onto a field within each file request which would rename it and file it in a pre-designated folder structure. It would update the record to show the file was submitted. It would update the record each time a replacement file was submitted. 3-Separate file synchronization system to copy videos that are being recorded in different rooms over a LAN or the web into the same pre-designated file structure. Prefer real time synchronization because they are hours long files and need to be edited or reviewed before the reco...
I am looking for an experienced computer networking expert who can assist me in enhancing my understanding of network protocols, routing and switching, and network security. I am going to have an online at home test at 3pm EST(Eastern Standard Time) to 5pm on April 18th so I need just two hours of your time. The lecture notes and mater...5 (5.5.1, 5.5.2, 5.5.3, 5.5.4) - ICMP: The Internet control message protocol Section 5.6 >> The link layer and LANs: Chapter 6 - Introduction to link layer - Section 6.1 - Error detection and correction techniques Section 6.2. - Multiple access links and protocols Section 6.3. - Switched local area networks - Section 6.4 - Link Layer addressing and ARP 6.4.1 - Ethernet - section 6.4.2 - Link layer switches...
...developed app directly with hardware (beacons, sirens, etc.) - are solution-oriented (we don't believe in "that's impossible") - don't mind working on your own without constant supervision - keep your word and communicate openly Advantages: - experience with image processing, neural networks, and IoT concepts - knowledge of the Arduino IDE - basic understanding of communication protocols (USB, Ethernet, etc.) - project management skills - experience leading a development project - communicative English - you are ready to start right away You'll get a chance to: - directly influence the final product with your knowledge and skills - experiment and implement your ideas - continuously learn hands-on - collaborate with professional and senior develope...
...with these accurately • Data and Document checking • Data Entry • Keep CRM tidy and accurate • Prepare and sort out paperwork ahead of events and distribute within the organization And more… Position Requirements • Experience in an admin role • Spelling accuracy • A good eye for fine details • A perfectionist • Passionate about being organized • A well-performing desk-based PC environment • Ethernet (LAN) connected Internet connection with 8x8 VoIP Test results attached that can be done in internet explorer at • A quiet, professional environment in which to work • Reliability • Dedication to a long-term career It is in your nature to analyse things and look for improvements • Willingness to...
...attendance tracking system using a Raspberry Pi and a USB RFID reader. The system should be able to read RFID tags and record the attendance data. Key requirements: - Develop a script that can integrate the USB RFID reader with the Raspberry Pi for attendance tracking - Store the attendance data on an external database - The external database should be an MS Access DB storeb on windows server on lan shared folder data stored to database should be : date/time, cardID (readed card ID), cardReaderID (could be mac address of network interface), cardReaderSN (also could be the mac address of network interace), cardReaderName) Ideal candidate should have: - Proficiency in Raspberry Pi and the ability to set up an RFID reader - Experience in database management, particularly with MS...
