Client requested to install FreePBX on Raspberry PI, installation was completed through Anydesk in 2 hours, video of the installation has been recorded.
I need you to create a program to route traffic destined for certain domains to specific IP addresses with minimal fuss. I want to be able specify in a local .txt file called in working directory the whole content of the Windows hosts file that need to be written. The program you will make should be put in working directory and when run will read the c...whole content of the Windows hosts file that need to be written. The program you will make should be put in working directory and when run will read the content of the and generate an .exe file called output.exe. when run will modify Windows hosts file of the computer it was run from without asking for Administrator rights. Windows hosts file is location: C:Windowssystem32Driversetc The file is called: hosts
I have an existing file that needs further refinement. Photos included show images from solidworks and original reference piece. Precision to original photos is key. I expect the final file to match the original in every regard. A previous freelancer created the file but could not edit it further due to growing complexit...original reference piece. Precision to original photos is key. I expect the final file to match the original in every regard. A previous freelancer created the file but could not edit it further due to growing complexity. Idealised and non-accurate schematic available on request. The final piece need to be hollow for 3D SLA printing. The x4 arms from central body need rework, front faces at each end of arm need more detail and open areas need to be closed.
...Restore or delete flash cookies. VI – Datetime system Time zone, time server, time format Automaticaly change the time zone to match with the zone of the current IP or geolocation. Set any format date & time for Windows. Custom time synchronization. VII – webcam and audio Change driver name, version, VID - PID Manage Audio and webcam devices. Create custom Audio drivers. Change audioContext fingerprint. Custom webcam drivers. VIII - Peripherals telemetry Keyboard parameter: Delay, speed, wait seconds, flag, cursors size, forcus height, forcus width, border size. Manage advanced Mouse parameters. Edit advanced keyboard parameters. Change telemetry fingeprint. IX - location Make virtual sensor device and set geo location Automaticaly set a new geographic l...
The mobile app is an add-on for the rental management service and is intended to be used by the drivers who do delivery and collection of the rented cars. The mobile application is designed to provide users with the ability to view reservations assigned to them and make check-in and check-out processes. Technical requirements The mobile app must be implemented using the React-Native framework. Api calls are made using any GraphQL library. The application must be able to work in offline mode and synchronize data with the server when the connection is restored. The API is already implemented and available at Authentication is implemented using the Firebase Authentication service. If you read here start your collaboration request with word: TRA APP Full
Using the two names written in hindi script (see the attachment), I want it to be designed in a tattoo format. The Tattoo will be on the arm. It needs to be stylish, and preferably 1 color.
I have an old family photo that I am desperately trying to get in restored. I have done some work on it, but I am struggling to fix the left arm of the baby. I will send you the original and the image that I worked on so you can get an idea of what I have done so far. I'm not sure if the leg looks realistic either. If you can let me know if this is something you can do and how much this would cost, I would appreciate it.
Project Summary: A database needs to be developed for a delivery application that allows users to order food from restaurants and businesses, and have them delivered to their homes. The database must include the following entities: Roles, Users, Delivery Drivers, Restaurant/Business, Product, Orders, Promotions, Order, Payment, Chat, Support, Account Configuration, Notifications, Delivery History, Ratings and Reviews, Artificial Intelligence, Augmented Reality, Social Networks, Data Analysis and Statistics, Invoicing and Payments, Loyalty Programs and the relarion between them Project Objectives: - Develop a well-structured and designed database that allows for the storage and management of data for the delivery application. - Ensure data integrity and efficiency in access...
Project Summary: A database needs to be developed for a delivery application that allows users to order food from restaurants and businesses, and have them delivered to their homes. The database must include the following entities: Roles, Users, Delivery Drivers, Restaurant/Business, Product, Orders, Promotions, Order, Payment, Chat, Support, Account Configuration, Notifications, Delivery History, Ratings and Reviews, Artificial Intelligence, Augmented Reality, Social Networks, Data Analysis and Statistics, Invoicing and Payments, Loyalty Programs and the relarion between them Project Objectives: - Develop a well-structured and designed database that allows for the storage and management of data for the delivery application. - Ensure data integrity and efficiency in access...
...cash flow statement using the right business drivers - Calculate target stock price using the DCF method and Relative Valuation method (P/E, P/B, etc.) Please note: You do not need to create a detailed financial model. High-level forecasting is enough. The financial data (historical income statement, balance sheet, cash flow statement, and any specific ratio/data) can be obtained from the company website (Investor Relations section), or free financial database providers like Google Finance/ Yahoo Finance. Equity Research Report (in word document): You have to write a detailed equity research report (referred to as an Initiation report) that should adequately cover: - Business Drivers: Detailed analysis of key business drivers of the industry an...
Hello, I have a custom yocto image for coral dev, but the pci is not working. The issue seems to be related to the device tree. I have old device tree that works fine with kernel 4.14 but the current device tree on kernel 6.1 is not working. For more details please contact me. Here is the issue i have: root@coral-dev:~# lspci root@coral-dev:~# dmesg |grep pci [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait net.ifnames=0 pci=pcie_bus_perf [ 1.768491] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770620] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770645] imx6q-pcie: probe of failed with error -2 [ 1.796623] imx6q-pcie: probe of failed
...supporters, those who gamble on NRL games and those consumers who are in a tipping competition of the NRL. Your report will include an Executive Summary, Marketing Recommendations, a General Overview of the Market, Statistics of the market, Population/demographics, Average income / disposable income/unemployment rate, Growth trends/market confidence / future outlook, Consumer Segmentation, Current drivers/needs of the market, Consumer Purchasing Behaviour, Market Segmentation, Target Market Segments, Market Size, Market Leaders/Competitors, Competitive Landscape & Direct Competitors, SWOT Analysis of the Market. Identify Sponsorship opportunities. The primary objective of the report is to provide clear directions on how to monetize our assets via Affiliate Marketing. I have a...
Looking for theme ideas, tagline ideas, and creatives for a 14' x 48' bill board for Ten Four Truck Insurance. From conservative to riskay, all creativity, no matter how far out there, will be considered and appreciated. For company information, visit TenFourIns.com. Multiple winners are possible. Conservative Example: Insurance for Truck Drivers Riskay Example: Do you like happy endings? Go wild, Be crazy, We want something "Outside of the Box" NOTE: This attached graphic is boring but the tag line is good. This is why we are looking for something else.
I would like a drawing similar to the Flying Hellfish from the Simpsons, but not exactly the same. I would like the cigar removed, and the background to be a bullseye. If the fish could have a tattoo on its arm that says "Pew Pew", that would be perfection. The fish would ideally resemble a Salmon. The idea is to use the drawing to turn it into Morale patches that can be given out as SWAG.
Hello. We are looking for a WordPress Developer in Brasil, to help ur company with the design, development, and launching of landing pages on existing WordPress websites. We are an SEO agency, and need a great developer/designer with great attention to detail that is able to be our "development" arm. Must speak English.
We are exploring to build on demand service for helps, drivers, maids including marketplace for trainings of Home Care Takers.
...hole for a long necklace/lanyard. This would be minted out of precious metal so as to give value to the coin to maintain it's relevance and respect. I am looking for a graphic design to mint into this coin. My idea would consist of a Nautical Safety Throw Ring with a 'watchful eye' in the center on one side. The other side would show a parent holding a small child's hand (adult arm coming from top and child arm coming from below) with knee deep ocean water/waves in the back ground. On this back side, there would be an embossed scroll for stamping of a child's name. I have attached an extremely elementary rough sketch as a starting point, but open to any and all design suggestions. *The Minted Coin will be of typical Metallic Finish - monocol...
We need a customized version of Armbian OS (Ubuntu 20 or 22) with a patched kernel to enable hardware H.264 encoding support for Allwinner H3 CPU. The Linux image should be sourced from the official website or other if they support configurations for NanoPi Core. The customized image should also include support for YUYV to H.264 encoding for USB cameras. Requirements: 1. The customized Armbian OS image must be based on Ubuntu 20 or 22. 2. The image must include the required patch for enabling hardware H.264 encoding support for the Allwinner H3 CPU. 3. The kernel must be patched to support YUYV to H.264 encoding for USB cameras. 4. The customized image should be compatible with the NanoPi Neo or NanoPi Core hardware. 5. The customized image must be provided
My mother passed away and we have named a "star" after her. I would like to get a tattoo of the coordinates and im also considering some sort of symbol, on my arm in remembrance. The Coordinates are constellation dimensions: RA 22h 3m 5.01s D -09° 10' 15.96" I would like suggestions as to the symbol in which would go with the coordinates. I have attached some thought starters but am not solely stuck to anything and different ideas are welcomed.
I am starting my brand community called: SMC "Support Muslim Community". This brand will be showcased on high quality sweaters for men and women. This brand is a strong and clean brand, with a ...brand will be showcased on high quality sweaters for men and women. This brand is a strong and clean brand, with a logo to support that. The logo needs to be simple but powerful, focused on line art that when a muslim first glances at it, they know what it symbolizes. The logo needs to be in the front and back. I want the letter S, above the wrist. M letter on the hoodie, and C to be on the left arm near the wrist. When the arms are crossed in front for the stance of prayer, with the head down, it should be visible the SMC letters. I attached some rough drafts I created of the l...
I need someone who can source truck drivers with their own trucks to join our trucking team.
! I need to design PCB that would work as an middleware between motor drivers (34 pieces) and motors (34 pieces). Thats it! I need your design to be manufacturable immediately with one
! I need to design PCB that would work as an middleware between motor drivers (34 pieces) and motors (34 pieces). Thats it! I need your design to be manufacturable immediately with one
I need someone who can help me with my DELL c6220 server. I have a DELL c6220 server with ESXI7 installed. I bought a new Intel X520 Dual-Port 10Gb network card which I need to be installed. These are the duties: - Reset BMC password on the server. - Install Intel X520 Dual-Port 10Gb drivers via CLI (not vie ESXi). - Upgrade server BIOS and FIRMWARE ************************************ French Version (Version Francaise) Expert serveur recherché. J'ai besoin de quelqu'un qui puisse m'aider avec mon serveur DELL c6220. J'ai un serveur DELL c6220 avec ESXI7 installé. J'ai acheté une nouvelle carte réseau Intel X520 Dual-Port 10Gb qui doit être installée. Voici les tâches à accomplir : - Réiniti...
We need new home page for our website. Truckroots. com you can view the site , it’s still under development. Stick to the same colors we have, use either image or video for each following sections. Menu section; Home : services : Academy : Get Free CDL : Shop Trucks: Hire Driver: Commercial Insurance: Semi Truck Auctions: New Drivers Training. Section 1 will have three sliding banners. And here is the content for each banner. Banner (a) : New drivers, Hire driver , Shipper , brokers, carriers, Commercial insurance, semi trucks Auctions, dispatching job , dispatch training course , Learner permit course , become owner operator, buy truck, sell truck , rent truck , buy trailer, sell trailer, rent trailer, Academy , Banner (b) Join our academy of Premum Cou...
You will implement a simplified version of many-to-one user level threads in the form of a library called Simple Threads. In the many-to-one model for user level threads, all threads execute on the same kernel thread. As there is only one kernel-level thread associated with the process (the process containing threads is represented by a single context within the kernel), only one user-level thread may run at a time. Your thread manager will include a preemptive round-robin scheduler. If a thread does not yield during its time-slice, it will be preempted and one of the other ready threads will be resumed. The preempted and resumed threads should change state accordingly. You will also implement thread synchronization and demonstrate that it works as expected. Implement...
...factors that contribute to the high rate of vehicle accidents in India. One of the major reasons is the lack of adherence to traffic rules and regulations. Many drivers on the road do not follow basic traffic rules, such as wearing seatbelts or helmets, speeding, and drunk driving. The attitude of drivers towards road safety needs to change, and strict enforcement of traffic rules is necessary to curb this problem. Another factor that leads to road accidents is the poor condition of roads. Many of the roads in India are in a state of disrepair, with potholes, uneven surfaces, and inadequate lighting. This makes it difficult for drivers to navigate the roads safely, especially during the monsoon season when the roads are more prone to flooding and waterlogging. Ped...
Need a paralegal to facilitate closing documents with couple in Kingsville Ontario; copies of drivers licenses plus notarize a couple documents and FedEx back to title company in USA. Closing is 3/17, will need this packet executed back to USA by 3/15 or 16.
Hi! I need to design PCB that would work as an middleware between motor drivers (34 pieces) and motors (34 pieces). Thats it! I need your design to be manufacturable immediately with one of PCB manufacturers.
The website will be a one-stop solution for domestic help seekers to find reliable domestic helpers such as maids, drivers, and other household help, as well as connect with trusted domestic helper agencies. We understand that finding the right domestic help can be challenging, and that's why we will create a user-friendly platform to simplify the process. The website will allow users to search for and connect with local domestic helpers and agencies that match their requirements. The website will offer features such as user reviews, background checks, and a comprehensive database of qualified candidates to help domestic help seekers to find the perfect fit for their household needs. Whether they are looking for a live-in or part-time helper, the website will be designed to mak...
...nose and the mouth like an outline not filled but filled with her as an actual Diamond ? like the print filled in the outline. But not the whole body like above the navel and up. And I wanted her head tilted up but her eyes closed like the link below like to the sky with eyelashes extensions and a crown on her head link was the outline I kind of wanted as far as the body and lips but not the arm link is the type of hair I wanted on her 3. And also I wanted her to have her eyes like these with them closed but eyelash extensions that fit the face. And eyebrows that aren’t thick.
we are looking for integration developer resource to look into data migration between various vendors databases. one is between Dataverse and MySQL database. its both schema and data to migration to MySQL database. another one is between Dataverse and Postgres. again both schema and data. Task is to pull data from dataverse and script it. later that script will be used in ARM Templates to execute in on a different server.
We want to build a device, which checks the ID/Passport/Drivers Licence of our clients in a retail store. The device should check if the person is over 18 years of age. If the person is over 18 years of age, the device should open a door (we write this function ourselves). If the person is below the age of 18, a message should be shown. 10 seconds after a successful scan, the videostream should start again and age verification should be possible again. For each scan, the app should save a picture of the document. MRZ, that have to be recognised Passports Swiss identity card Swiss Drivers License (The birthdate is not in the MRZ. Just check, if the MRZ is a correct Swiss Drivers Licence.) Helpful Link: Hardware Raspberry
Our business has a very appealing logo, and now we are looking to have a secondary logo for another arm of our business. We want to incorporate the existing logo into the design, whether that be re-scaling the house logo or modifying a part of it, we don’t want to lose too much of our existing logo in the secondary one. The secondary logo is for our vacation rental business, so we were looking to mostly add elements to the existing logo to represent this arm of our business.. We are located in Myrtle Beach, SC Some ideas include incorporating Beach, waves, palm trees, a sun, hammock, etc. Also we do like the simple color tones and simple design, we do not want the new elements to have a different appearance, so nothing shiny or too textured or too detailed. Lastly...
The video is pranking delivery drivers, you will be secretly mic'd up and i will tell you what to say at times but also give you the script and I'm happy for you to improvise. My tik tok is attached below
Design LMS for new drivers, motorbikes, trucks, and bus training. Content and videos provided.
Requirements from follows: Full menu on Epos Post code to locate address for delivery drivers. Customer database Preview / review / edit orders Repeat orders Sales / expenses Online ordering facility Printing App ordering Restaurant tables Restaurant booking system Payments facility Stock control Vat calculations
Hi Arm M., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
Hi! I basically need from you to build PCB for prototyping purposes (design that could be easily and very quickly manufactured). I have around 30 micromotors from 1, Constar company and this connector: HRS DF36-15S-0.4V(51) 2, I also have few Maxon "Heavy duty" motors and 3, Flexible PCB with many sensors. PCB should enable connection from above appliances into many motor drivers and controlling boards. Additional requirement is that this PCB should enable us to have extremely fast signals as the whole prototype works on CAN FD with controlling loop 2ms. *Prefered skills in high speed robotics or automotive industry is needed. Please do not apply if you don't have advanced experience. FAQ: 1, When do you need it? Ideally yesterday, acceptable this weekend, negotia...
I need a short 3D animation production. I need to explain a case more clearly. While two vehicles are moving on a two-way divided road, incoming and outgoing directions, they see each other and stop. People get out of the vehicle and fight. In short, this is how it goes. No need for car, buildings or facial parts details. It is en...are moving on a two-way divided road, incoming and outgoing directions, they see each other and stop. People get out of the vehicle and fight. In short, this is how it goes. No need for car, buildings or facial parts details. It is enough to model modelling is okay. from library. The duration will be about 10-15 seconds. It is enough to be animated with the perspective of the car drivers and an overhead angle. please send me 3d animation examples
I want to develop a mobile app that can be used for the purpose of transportation. Such that passengers could be connected to tricycle drivers in a particular city. Here's a sample
I'm developing MCAL drivers (micro-controller abstraction layer) following AUTOSAR standard. Need help with debugging the driver code. Driver code follows AUTOSAR specification, work in C and rather simple. I am relatively new and inexperienced hence need guidance and help. The code has already been tested on one compiler, need to do this with another compiler, where I'm seeing a few errors.
The trucking company needs CDL A drivers. We have contacts of the drivers need to call them and hire.
Hi Arm M., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
I need to implement a simplified version of many-to-one user level threads in the form of a library called Simple Threads. In the many-to-one model for user level threads, all threads execute on the same kernel thread. As there is only one kernel-level thread associated with the process (the process containing threads is represented by a single context within the kernel), only one user-level thread may run at a time. The thread manager will include a preemptive round-robin scheduler. If a thread does not yield during its time-slice, it will be preempted and one of the other ready threads will be resumed. The preempted and resumed threads should change state accordingly. Important: pthreads should not be used anywhere in your implementation. The intent is to create sim...
