目前的python脚本是调用win32api和win32con运行库来获取虚拟键盘的映射，我要改成用运行库来获取指令，USB设备是48路短接发送器，发送形式是十六进制代码，48路每一路连接着机械键盘上面的按键，VID和PID都知道
目前的python脚本是调用win32api和win32con运行库来获取虚拟键盘的映射，我要改成用运行库来获取指令，USB设备是48路短接发送器，发送形式是十六进制代码，48路每一路连接着机械键盘上面的按键，VID和PID都知道
目前的python脚本是调用win32api和win32con运行库来获取虚拟键盘的映射，我要改成用运行库来获取指令，USB设备是48路短接发送器，发送形式是十六进制代码，48路每一路连接着机械键盘上面的按键，VID和PID都知道
目前的python脚本是调用win32api和win32con运行库来获取虚拟键盘的映射，我要改成用运行库来获取指令，USB设备是48路短接发送器，发送形式是十六进制代码，48路每一路连接着机械键盘上面的按键，VID和PID都知道
目前的python脚本是调用win32api和win32con运行库来获取虚拟键盘的映射，我要改成用运行库来获取指令，USB设备是48路短接发送器，发送形式是十六进制代码，48路每一路连接着机械键盘上面的按键，VID和PID都知道
目前的python脚本是调用win32api和win32con运行库来获取虚拟键盘的映射，我要改成用运行库来获取指令，USB设备是48路短接发送器，发送形式是十六进制代码，48路每一路连接着机械键盘上面的按键，VID和PID都知道
Convert c++ projects to Delphi projects
我有路由器上下壳需要设计： 1.尺寸是250X160X50mm; 2.接口包括5个以太网口，3个USB A type,一个DC插座，一个复位按钮； 3.顶部中央有圆形LED指示，直径50mm； 4.带两个扬声器，开口朝下； 内部PCB 参考附件。 要求： 设计简洁有几何艺术感，文件格式SKP
WOOPEHN抗老化护肤硅胶电动洁肤仪，适合所有肤质，深度温和清洁，防水，携带方便，USB充电（粉红色） WOOPHEN硅胶电动清洁仪具有4级可调振动强度和3种大小不同的刷毛，刷毛十分柔软，，可深度清洁，适用于所有皮肤类型。 采用高频振动技术疏通毛孔，清除痘痘，最终改善肌肤。特别的舒缓按摩模式，使得面部细胞更新，去除皱纹，防止皮肤松弛，延缓衰老，恢复肌肤活力！ 通过光滑的硅胶接触引入高频振动波，以帮助清除毛孔中的污垢和油脂以及化妆品残留物，清理坏死性角质，建议清洁脸部的不同区域约15秒钟。 WOOPHEN硅胶洁面仪具有超长的电池使用时间，小巧精致，携带方便，可放在化妆袋中，完全防水，可在水中清洗该洁面仪 本产品采用优质医用硅胶，完全耐用，保修期为两年，30天内无理由退款。 颜色：粉红色 充电时间：少于120分钟 使用时间：150分钟至480分钟 电源：DC 3.7V 200mA 振动频率：6000rpm 重量：50克 尺寸：9.7厘米* 6.5厘米* 3厘米 防水等级：IP88 产品优势： 防水 携带方便 电池寿命长 深沉而温和的清洁 适合所有肤质 获得健康的肤色 让你的皮肤更干净 有光泽，有弹性
我公司有一个项目， cy7c68013A_128 单片机的软件开发， 细节是用GPIO模仿Jtag烧录两片Xilinx的PROM. (XCF04S, XCF01S). Xilin有比较详细的方案。 见副件。 如果你们承接这类工程， 请你给我一个报价。 我们有硬件平台， 你们需要提供， 1 windows usb 的驱动， 指定等待下载的文件。 Cy7c68013A 的程序，把指定的文件烧录到目标PROM. 启动系统， 读取FPGA内部寄存器，确定烧录成功。
Mac C或C++ 苹果系统 MAC OS APP开发 总需求：开发一个应用程序，完成与USB设备通信，调用C语言 函数完成功能，在界面上显示对应数据 要求： 1. 提供APP源代码，注解 2. 打安装包
Mac C或C++ 苹果系统 MAC OS APP开发 总需求：开发一个应用程序，完成与USB设备通信，调用C语言 函数完成功能，在界面上显示对应数据 要求： 1. 提供APP源代码，注解 2. 打安装包
...使用RMII接口的PHY，所以RMII接口管脚也要预留出来，PHY使用DP83848IVV； 6. 串行通信接口 预留出1个RS232用的UART； 预留出1个RS485用的UART，另外还要预留1个管脚用来RS485的方向控制； 7. USB接口 预留出1个USB接口用来外接USB设备； 8. 旋转编码器接口 使用2个外部中断口来接增量型旋转编码器； 9. 蜂鸣器接口 使用一个PWM输出来控制蜂鸣器； 10. GPIO接口 至少预留出32个GPIO口用于外部设备的控制，如键盘输入，指示灯输出，三态安全开关输入，三档选择开关输入等； 基本驱动需求 1. 旋转编码器输入驱动 旋钮编码器驱动要求能判断编码器旋转方向，目前这两个GPIO口不给上层读取, 直接由驱动发送按键值，就是加入LINUX的输入事件，正向旋转发送键值59，反向旋转发送键值60，从event0读取。 2. RS485驱动 RS485需要1个方向控制脚，当向对应的UART发送接收数据时，方向脚能自动实现方向控制。 3. 蜂鸣器驱动 蜂鸣器驱动要求能设置PWM输出的频率，输出的时间，输出时间到了自动关闭PWM输出。 4. 薄膜按键驱动和USB键盘驱动 预留24个GPIO作为薄膜按键的输入，目前的驱动是作为GPIO口来读取的；最好也缴入LINUX的输入事件，按不同的按键发送不同的键值，从event0读取；外接USB键盘驱动最好也从event0读取。 5. 其他GPIO驱动 每个GPIO口都可以通过驱动设置输入/输出。 6. 触摸屏驱动和外接USB鼠标驱动 7. 触摸屏驱动和外接的鼠标驱动设备文件最好固定，例如触摸屏固定使用event2，USB鼠标固定使用event3。 ENGLISH Basic Requ...
我需要一个紫微斗数软件，可以在窗口和手机上运行。 要求如下： - 最重要先要懂中文及有紫微斗数相关知识 - 包含一个离线数据库（例如sqllite）可以让我因应不同命盘输入不同运程 - 可以给我设置不同条件来排列和显示数据。 - 有UI可以显示基本的紫微斗数命盘和时代八字转换器。 - 可以容易地备份和用USB带走 - 有一个简单的管理登录系统增加安全性 - 你可以使用任何程式语言或引擎（Unity3D）来编写
Hello, I need someone who have experiences in USB Hid device. Chinese candidates are preferred. 有一个usb hid设备，不是普通的键盘鼠标之类，没有确定的usage id，需要通过stm32f105读取并发送数据给该设备。 目标是搞清楚如何与该设备通信，并提供单片机源码和原理说明。
在SD账号1年以上，荣誉值1000以上。电子产品安卓系统的USB防水内窥镜线长1M。防水摄像头配备6个LED灯，拍摄的图片清晰明亮， 超迷你摄像头外直径7mm. 在各平台上为热销产品，销量几千。
电子产品安卓系统的USB防水内窥镜线长1M，链接手机电脑拍摄小视屏。6个LED灯的摄像头可以保证拍摄清晰的照片，摄像头外直径7MM. 希望寻找美国市场的电子产品销售网站账号合作等。
在公司的诸多产品线中，我们将更换一条产品线的外包商。新的外包商我们希望在技术上能够高于原有开发商，并且能够协助我们实现产品的充公，以适应市场的需要。目前产品是DELPHI开发的，未来产品的开发工具需要探讨。未来不排除更多的产品外包工作。
...However, the videos should not be shared randomly and sold online by our students. Therefore, we decide to encrypt the videos through hardware encryption to prevent the spread of the videos. It is necessary to develop three parts including video encryption software, USB softdog, and encrypt video player. The specific requirements are as follows: 1, We need to encrypt videos every day with the encrpytion software. The students can obtain the encrypted videos through online or offline copy. 2, The students plug the "softdog (usb)" we give them in their computers. 3, The computers should be pre-installed with our special player. After plugging in the "softdog", the player will show the student's identity information including name, gender,...
多轴运动控制卡； 支持三轴以上插补； 支持S插补； PCI与USB接口，最好两种都有； 16路开关量输入输出，可以软件设置开关量的极性，带光耦隔离； 带有+5V电源输出； 支持X轴、Y轴、Z轴的硬限位，软限位； Y轴可以设置为旋转轴； 支持伺服与步进； 支持手轮； 最好有轨迹显示控件和G代码解析控件； 使用单片机开发(C 开发)； 要提供能够生产的所有资料和软件工具； 生产成本尽可能低； 提供全部源代码，并且有详细注释； 最好有成熟的开发方案，有样品可以测试；
多轴运动控制卡； 支持三轴以上插补； 支持S插补； PCI与USB接口，最好两种都有； 16路开关量输入输出，可以软件设置开关量的极性，带光耦隔离； 带有+5V电源输出； 支持X轴、Y轴、Z轴的硬限位，软限位； Y轴可以设置为旋转轴； 支持伺服与步进； 支持手轮； 最好有轨迹显示控件和G代码解析控件； 使用单片机开发(C 开发)； 要提供能够生产的所有资料和软件工具； 生产成本尽可能低； 提供全部源代码，并且有详细注释； 最好有成熟的开发方案，有样品可以测试；
...对违规外联的终端实时报警，支持自动阻断，隔离内网，自动关机等策略 支持违规联网总部集中、区域分级报警，联动多个扫描区域，构建广域网、城域网违规联网集中监控平台，实现区域独立报警的同时，进行总部集中报警，总部管理人员能够统一查看多个区域违规联网记录。 移动存储设备注册，支持普通U盘，移动硬盘，手机SD卡，等移动存储介质；高密级（纯内部使用），中秘级（外部凭密码打开），低密级（内外都可正常使用） 移动存储管控 限制移动存储设备的权限，（创建，读取，写入，重命名，删除）控制； 移动存储自动加密，支持拷贝到移动存储设备中的数据自动加密 数据销毁：防止数据还原造成泄密；禁止U盘病毒的传播 外设端口控制：串口并口、1394、红外、蓝牙、PCMCIA、SCSI控制器、调制解调器。 终端外设控制 存储设备：USB存储介质（U盘、活动硬盘等）、光驱、软驱、磁带。 打印设备：本地、远程、虚拟打印机。 设备属性：设备管理属性、网络适配器属性。 文档操作审计，包所有文档的创建、访问、修改、复制、移动、删除、恢复、重命名等操作；支持按部门，用户明，关键字，日期查询 内网安全审计 文档打印审计：详细记录所有打印操作的时间、终端、用户、文档名称，打印机名称，打印分数，文档大小，支持按部门，用户名，关键字，日期查询。 邮件发送审计：记录标准协议邮件、Exchange邮件收发的收件人、发件人、正文及完整附件；记录网页邮件发送的收件人、发件人、正文及完整附件。支持按部门，用户明，关键字，日期查询。 即时通讯审计：完整记录MSN、QQ、TM、RTX、Yahoo通、Sina UC、Skype、阿里巴巴贸易通，阿里旺旺...
...4、较强的独立工作能力及良好的团队协作精神。 5、逻辑分析能力强，条理性强，有一定的讲解能力； 6、有相关工作经验优先。 岗位职责： 1. 进行嵌入式系统（Embedded Linux）驱动程序开发。 2. 负责系统底层的BSP相关工作，如Linux Kernel移植优化，设备驱动开发、移植和优化。 3. 参与项目需求分析，进行驱动软件的详细设计。 4. 根据公司技术文档规范编写相应的开发文档。 驱动工程师 Software Driver Engineer 任职资格: 1.精通C/C++语言、ARM汇编，熟练使用GCC。 2. 至少两年以上嵌入式系统（Embedded Linux）软件开发经验，精通嵌入式系统软件开发。 3.深刻理解处理器架构，热爱处理器相关技术。深刻理解内存、DMA、中断等概念。熟悉ARM 处理器。 4.精通Linux 下驱动程序开发。有USB、video、audio、UART、IIC、SPI、SD/MMC等开发经验佳。 5.深入理解Linux文件系统、进程管理机制和内存管理机制。 6.熟悉威盛平台驱动开发者优先 必须：至少两年以手机或平板驱动开发经验。 岗位需求： 1、精通 C/C++/Java 编程语言，并且有相关项目开发经验。 2、熟悉Linux下C/C++/Java开发环境。 3、熟悉Linux下 Shell脚本使用。 4、熟悉Android应用编程开发，包括环境建立以及常用调试方法。 5、了解Android Frameworks层和HAL层相关知识，有过相关项目经验者优先考虑。 Android高级软件工程师 Software Engineer for Android Devices 工作职责： 1、熟悉 Android SDK，了解Android fr...
使用USB CDC类实现USB转串口windows驱动 ，实现的windows 驱动可以和我们硬件设备正常连接工作稳定。 使用USB CDC类实现USB转串口windows驱动 ，实现的windows 驱动可以和我们硬件设备正常连接工作稳定。
使用USB CDC类实现USB转串口windows驱动 ，实现的windows 驱动可以和我们硬件设备正常连接工作稳定。 使用USB CDC类实现USB转串口windows驱动 ，实现的windows 驱动可以和我们硬件设备正常连接工作稳定。
Windows Socket开发，C/S程序，多线程，界面开发（GPSTracker，IPcamera，USB电话机）。MySQL，SQLSever，多年工作经验，积累大量源代码，可以复用到其他的新的项目中！！希望合作愉快！！
...part of this project, I need assistance in performing the following tasks: - Writing VHDL code - Designing FPGA circuits, specifically for Xilinx FPGA The goal is to achieve PWM via VHDL and PS to PL UART communication in the FPGA circuit design. It would be advantageous if you have a strong background in VHDL, FPGA circuit design and specific experience with Xilinx FPGA. Additionally, understanding of PWM and UART communication would be beneficial. Estoy buscando un ingeniero FPGAs y firmware para q haga un pequeño proyecto para hacerlo correr en una tarjeta de desarrollo Pynq-Z2 con el Sw Vivado. Se trata de implementar un PWM de valor de entrada variable, esto en VHDL para cargarlo en la PL de la Zynq. Se trataría de lo siguiente; a través del puert...
I'm in need of a Python application that can connect around 200 Android and iPhone devices to a PC via USB cables, allowing me to perform various automated tasks and workflows on them. Key Requirements: - **Bulk Control**: The app should be able to interact with all connected phones simultaneously. I should be able to create and assign tasks to each phone individually, or define tasks that apply to all devices. - **Task Automation**: I need the app to automate several types of tasks, which include: - Web browsing or searches: The app should be able to instruct the phones to browse certain websites or perform specific searches. - App testing or usage: The app should be capable of launching and interacting with various applications on the phones. - Content downloading or u...
...requirements: - The logo should have a modern style, with an emphasis on sleek design. - It should incorporate a USB symbol as the main element. Ideal skills and experience: - Proven experience in modern logo design. - Ability to create a design that is both visually appealing and suitable for a car. - Understanding of gaming culture and symbolism would be a plus. This project is a great opportunity for a creative designer who is passionate about gaming and modern design. Your work will be prominently showcased on a unique car within a popular GTA server. Attached is the inspiration for the car logo. I want to remove all the words and blue back ground. I like the little face in the usb head. I also want the wire to have a little squiggle or bend in it to add dep...
I'm looking for a skilled professional to create a Web Assembly prototype, , using a small Delphi application that primarily showcases an interactive user interface. The aim is to target the prototype for web browsers. Key Requirements: - Creation of a Web Assembly prototype utilizing a Delphi application. - Focus on showcasing a simple interactive user interface The Prototype: - The user interface for the prototype is envisioned to be simple, consisting of basic elements. - The primary focus should be on the seamless integration of the Delphi application's functionality into a web browser environment.
I need a skilled person to help me create a bootable USB for Windows 11. I'm on Mac and need this to be Windows 11. Please let me know how long this will take.
I have a delphi project that i need compile. The project need some complements that I have but i dont know how to install them. I need that you make me a video in your pc installing the complements and compiling the project for I can do the same in my pc. Thanks you !
...need of an Arduino expert who is adept at programming a small Arduino circuit to control LEDs, a motor, and sound. It will be integrated into a small, Matchbox/Hot Wheels-sized fire truck. The LEDS will flash alternately to represent the emergency lights. The motor will power the back wheels and the sound will play through a small speaker as a siren and horn. Here are the requirements for the project: I believe the Arduino MKR Zero would be a good fit since it has the integrated micro SD card holder and sound processing capabilities. It also has an integrated battery charger. The Arduino needs to be powered by a rechargeable Lithium Polymer battery like 3.7 Volts. - Control LEDs: I believe I can get by with two white 3mm LEDs. I will install fibre-optics to transfer the light...
...advantage of its many connectivity options including BLE, Zigbee, and Thread. The ePaper display itself will be the Pervasive 2.13" display using the ZIF25 connector and SPI protocol. Schematics and additional reference details are attached, please read these carefully to ensure the ePaper display module functions accordingly. It will be powered by two CR2450 button cells, but please include a USB C connector for programming and backup power source. I'll also need a notification LED and a tactile button. The outcomes I'm expecting are: 1. Updated Schematic (i've attached one i've been working on for reference you can start fresh if you want though) 2. PCB design/gerber file 3. BOM spreadsheet with all components Note: I have the EXT 3-1 board and some...
For immediate work I need a Delphi programmer who can develop a simple Delphi program that executes an HTTP CALL command according to an existing javascript/HTML program. The solution needs to be in Delphi 10 and without the use of ready-made libraries (unless the programmer can install something free)
I'm in need...for integration in an existing device that is currently utilizing a ESP32-C3 Supermini Dev Board Key functionalities should include: - Bluetooth connectivity - GPIO pins configuration - ADC Input - USB-C Female Plug - Serial TX and RX IO - Ten (10) GPIO functionalities This blueprint will serve as the basis of a prototype I am developing. As such, I'm seeking to partner with someone who is experienced and proficient in the following areas: ESP32-C3FH4 development and configuration including the following features: - Bluetooth connectivity - GPIO pins configuration - ADC Input systems - USB-C connection. - Serial Comms Please ensure your proposal reflects your ability to fulfil these requirements. Also please do NOT ask to conduct business outside...
I'm seeking a programmer adept in Raspberry Pi to create a system that plays a video upon pressing a physical button. The technical specifications include: - Using a push button activating video playback - The Raspberry Pi device pulls video content from an external USB drive. Experience in handling Raspberry Pi systems and programming for hardware interaction is integral for this project. Familiarity with video playback processes would be highly advantageous.
...full calibration data from a sensor for further analysis. The software must have the ability to interact with the sensor via USB connection. Key Features: - should be able to fully extract the calibration data from the sensor - the tool should be user-friendly and have a clear interface - the software should have a USB connection for the sensor - the software should be able to output the data in a readable format for further analysis Ideal Skills: - Proficiency in software development - Experience in sensor calibration and data extraction - Familiarity with USB connections and software interfacing - Strong understanding of data analysis and presentation The project will require a combination of technical and practical skills, so please only apply if you ha...
I am in need of a proficient C++ programmer who can create a sof...am in need of a proficient C++ programmer who can create a software for Windows operating system that will effectively detect specific events when a USB device is plugged in. Registry Scrubber Key Features: - The software should monitor and identify the type of device that is connected to the USB port. - It should have capability to store this device data and send using RS-232 to an external MCU - It should also detect and monitor when a device is removed from the USB port. Skill Requirements: - Proficiency in C++ programming. - Experience in developing Windows-based applications. - Understanding of device interaction with Windows OS via USB. - Previous experience in creating device detectio...
I have three python codes in my raspberry pi which needs to be executed at the startup (when the pi is booted). one code involve USB camera, another codes is related to playing video via VLC media player and the third code is a counter that sends the data to a cloud. All the codes are working perfectly, they are even working when they are executed simultaneously, but the only thing is that the USB camera code is not working at the startup. If you want me to chat with you, start the bid with "pi" We have tried a lot of methods, but still no success, I believe it is because we are using raspberry pi 5, there are limited resources and libraries for it online. Please help me with this. Thank you.
I have a xenserver with four windows virtual machines. it is installed in a DELL server with RAID. A electricity failure damage the boot and got the grub rescue console. I load ubuntu from a usb and can see the lvm partition, but can copy. So I need some one to help me to copy the virtual disk to other xenserver instalation to load the fout virtual machines.
I require a skilled 3D designer to encapsulate a small wearable device with key inclusions of a battery compartment, USB C, and Micro SIM. The purpose of the design is to accommodate an IoT device, ensuring it remains sleek and compact. The utmost importance is placed on the dimensions, so the final design must have a footprint similar to that of a smartwatch. 30 x 30 x 10 mm. Key Skills and Experience: - Proficiency in 3D design software - Prior experience with wearable devices - Understanding of IoT device encapsulation - Ability to work with compact, small-scale designs
Our company develops both desktop and web applications tailored for analysing insurance premiums. These have been developed in Delphi over the past 25 years. We are seeking to establish a long term relationship with an experienced Delphi programmer with exposure to Microsoft SQL databases. ASP.net application experience is also desirable. Our software packages require continued upgrading and enhancement and given the specialist nature of our software we are seeking to establish a long term relationship. The primary requirements include understanding our business process and system design, determining and articulating technical solutions, and implementing the design into build and install stages. Australian based is preferred, our principal office is based in Sydney NSW. ...
I want an Android app for serial communication (like Hyperterminal). * Well documented source code of the app will be provided. * App will be capable of sending and receiving (i.e. full-duplex) serial data via OTG cable with RFD900A device. * The send and receive will be handled simultaneously. * Received data will be d...38400, 57600, 115200, 256000, Custom) , data bits (5, 6, 7, 8 bits), parity (None, Odd, Even, Mark, Space), stop bits (1, 1.5, 2), handshaking (None, RTS/CTS, XON/XOFF, RTC/CTS+XON/XOFF, RTS on TX) etc.) * App will be written in C++ using Qt. * GUI will be prepared in QML. * GUI will be designed to run both on Android phones and tablets. * For USB-to serial comms, app will use "mik3y/usb-serial-for-android" utility from ""
I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.
I have a C# project that I need translate to Delphi. The code is not too extensive but use SQLite. I will send the project source code if you send me a good proposal with you experience in c# and delphi. Please not send automatic proposals. thanks you!
I'm looking to hire someone to create two custom Rad Studio / Delphi VCL (or FMX) flow panel components for use with-in Rad Studio IDE. At a glance the custom panel will offer the following requirements and behaviours • Compatibility for Rad Studio/Delphi XE 10.4 and later • Can be based on any standard VCL (or FMX) component that might suit • Must be visually appealing, happy to offer some freedom in this regard (however, simple is best) • Support for Rad Studio Styles would be preferred but not required. • Sourcecode will be provided with delivery Please find the high-level requirements along with some example screenshots finally, I’m open to alternative ideas and changes to this requirements if it can meet my imp...
...dependencies, etc to make an operable package. YOU: Will create a complete “how-to” instruction package, presumably possibly writing a series of bash shell scripts that I can run from terminal as part of your project for me. I DO NOT WANT to use Docker or any other idea that will isolate what I need to do from the Ubuntu 24.04 system I am using. Ideally, you will have done the same thing on your development computer proving that a small cobol program will compile and can be run BEFORE you send your efforts to me for testing. Finally, the package results you create should be capable of being copied to a usb so that the gnucobol package can be easily copied to other computers which, of course, you will detail in your instructions....
